Extension of 3.3KV and 440V Overhead line for pumping station and check post and providing and fixing 08 nos of RCCB for lighting transformer at different location of Karma Project under Kuju Area.

Amount

Supply of Cement Pole upto 9 Meter, Wire Load capacity 400 KG

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required Above 8.0 metre and upto 11.0 metre

Errection of tubular pole of length exceeding 10 M but not exceeding 12M in cement concrete 1:3:6 (1 cemet 3 coarse 6 graded stone sugregate 40 nim nominalsize) foundation including excavation & refilling etc as required

Supplying and erection of bow stay set complete (galvanized) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20mm x 60 cm), 7/ 4,00 mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1 cemem 3 coarse sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required.

Suppying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supply of two lengths of channel iron 75 mmX40 MM X 5.7 Kg/m double pole cross arm for 3 wire OH kline conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins /fittings, nolts & nuts etc and paining with primer and finish paint as required

Errection of angle iron/channel iron cross arm on wood/RCC/PCC7steel tubular/rail pole etc as req

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc as required

rrection of ACSR conductor of 7/3.35 mm to 7/4.0 mm dia and abobe including binding etc as req

Supply of GI Wire & Swg (5X45+1.5X45) X 0.131 X 5 Span 191.91 KG)

Erection of cradle Guard as required

Supplying and erecting earth pit of minimum bore dia 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-Pipe technology as per IS 3043-1987 made of corrosion free G.I Pipes with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for effective and maintenance free earthing With 3 mtr. G.I Pipes having outer pipe dia of 50mm having 80-200 micron galvanizing, Inner pipe dia of 25min having 200-250 Micron galvanizing, connection terminal dia of 12mm in nominal soil with 50 kg (Two Bag) Back Filling Compound

Supply & erection of 16 Sqmm single core Flexible Cu Cable

Supply and fixing of cu lug 165QMM

Supplying and erection of a set of cross bracing frame work for 11 KV over head line double pole structure having four members fabricated out of 50 min X 50 mm X 6 mm anule iron to form s rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm MS flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish pains as required.

Supply & erection of RCCB 4 Pole, 100Amp, 100mA

Supply & erection of Distribution Box for RCCB

Supply & erection of 25 Sqmm 4 core Alu Armoured Cable for RCCB Connection

Supply & erection of 11 KV, 400Amp. GOAB Switch

Total impact of GST for the purpose of CTC

M/s Achal Electricals (BID ID -1141806)