Preparation of In-house Fabrication work of various steel materials for use of Nadiad(R) division at Nadiad(R) Division Store Campus from experience Contractors.

SR. E-URJA item DESCRIPTION UNIT RATE AS

NO. CODE NO PER COST

1 3611000001 9' T.C.D.P.Set from 65x65x6 mm,M.S. Angle Set

(1 set = 8 Nos. 9ft Angles + 2nos. 2ft.Angles

+ 2 nos 4' bracing Angle )

2 3611000001 9' T.C.D.P.Set from 65x65x6MM/50X50X6MM Set

,M.S. Angle (1 set = 4 Nos. 9ft Angles of

50X50X6MM +4 Nos. 9ft Angles of

65X65X6MM +2nos. 2ft.Angles + 2 nos 4'

bracing Angle )

3 3611000001 9' T.C.D.P.Set from 100*50*6 M.S.CHANEL/ Set

65x65x6 Mm angle(1set = 4 Nos 9ft. Angle,

Top Botom 4 Nos. channel & 2 Nos.2ft. of

Angle + 2 nos 4' bracing Angle)

4 3611000003 Plain DO/DP Set 9 Feet from MS Angle Set

65x65x6 mm (1 set = 4 Nos. Angle)

5 3611000003 Plain DO/DP Set 9 Feet from MS Angle Set

50x50x6 mm (1 set = 4 Nos. Angle)

6 3611000003 Plain DO/DP Set 9 Feet from MS Channel Set

100x50x6 mm (1 set = 4 Nos. channel)

7 3611000016 9'/11' M.S.Angle, with12 holes from No

8 3611000029 9' M.S.Angle Bracing from 50X50X6mm No

9 2609000004 2' M.S.Angle, with 09 holes from No

10 2609000005 2'.6" M.S.Angle, with 09 holes & for HT ABC No

11 3611000018 Tapping Angle 4'.6'' (With 8 hols) from No

12 2609000029 HT Garding Angle from 65X65X6mm No

13 2609000044 Tapping Channel 4'.6'' (With 8 hols) No

14 2614000002 Anchor Rod from 16 mm2 M.S. Round Bar & No

65x 65x 6 MM M.S. Angle

15 2614000009 Turn Buckle from 16 mm2 M.S. Round Bar & No

65x 65x 6 MM M.S. Angle

16 2614000012 Eye Bolt with two nuts from 16 mm 2 M.S. No

Round Bar (Nut supplied by Contractor)

17 2601000094 11 KV Top Fitting From M.S.Angle 65x 65x6 No

18 2601000040 U-Clamp from M.S. Flat of 50 x 6 mm No

19 2601000049 Side Clamp for PSC Pole from MS Flat of 50* No

20 2601000061 Side Clamp for RSJ Pole from MS Flat of 50* No

21 2601000052 Big Side Clamp for PSC Pole from MS Flat of No

50* 6 mm ''12 Inch

22 2601000066 Side Clamp for Steel Tubular Pole size 4 No

23 2601000069 Stay Clamp for PSC Pole from M.S. Flat of Pair

24 2601000071 Stay Clamp for RSJ Pole from M.S. Flat of Pair

25 2601000081 Stay Clamp for Steel Tubular Pole size 4 Pair

26 2601000150 Stay Clamp for HT AB Cable for PSC Pole Pair

from M.S. Flat of 50x 6 MM

27 2601000151 Stay Clamp for HT AB Cable for RSJ Pole Pair

from M.S. Flat of 50x 6 MM

28 2010000066 Preparing EYE HOOK from 16 MM Round Bar NO

with 2 hole & preparing of Angle with

required Hole for 11 KV HT ABC Cable as per

our requirement and instruction

29 2609000034 11KV V-Cross Arm from M.S.Angle of 65x No

30 2609000042 11KV V-Cross Arm from M.S.Channel of No

31 2609000048 Extension V Cross Arm (V Cross Arm 5 Feet No

M S Angle/ Chanel Stay Pair / Top Fitting)

32 2609000080 Extension of Girders from 9 meter to 11 No

33 2609000081 Extension of Girders from 9 meter to 13 No

34 2613000002 Three Hole patties No

35 3611000005 Top Channel 9 feet 100x50x6 mm with 14 No

36 3611000006 Bottom Channel 9 feet 100x50x6 mm with No

37 9910000035 C Formation LT - 5 W ( M S Angle 50x50x6 No

38 2601000063 M S Round Clamp 3' side ( M S Flat 50x6 No

39 3620000023 Earthing Coil from GI Wire -8 SWG as per No

MGVCL Specification

TOTAL ESTIMATED VALUE

Total Tender Amt.(Incl.GST) 29,97,957.56*

The rates are asked above only on percentage basis against estimated amount i.e. item wise

rates stated in the Schedule-B. The tender offer must be specifying the percentage either above

or, below to the estimated amount and it should be clearly specified both in figures and words.

Note- The Quantum of work (quantity) will be given as per requirement.

SAVE ENERGY FOR BENEFIT OF SELF AND NATION”

MADHYA GUJARAT VIJ COMPANY LIMITED

Regd.& Corporate Office: Sardar Patel Vidyut Bhavan, Race Course, Vadodara-

NADIAD O&M DIVISION OFFICE

OPP: 132 KV SUB STATION, P.O: DABHAN – 387 320, TAL: NADIAD

Tel. No. 0268 – 2581836 E-Mail: [email protected]

CIN NO: U40102GJ2003SGC042907

 Rate of item are consider as per cost data 2024-25

 Labour charges for fabrication of HT/LT line & T/C items from various sizes

of MS Angles / Channels / Flats / Round bar , G.I.Wire no 8 swg etc. As per

our requirement and as per sample and specification with two coat of red

oxide including cost of red oxide, loading, unloading stacking of all

fabricated item inside store yard.

 Above said items are in variable quantity but order value is not more than

 1% scrap allowed to fabricator IN MS ITEM, No Scrap Allowane Will be given

 All fabrication item and Earthing coil should be prepared in house and

necessary energy bill paid by contractor.

 All Rates are excluding of GST.

Seal & Sign of Executive Engineer

Contractor with Rubber Stamp MGVCL, Nadiad O&M Division