Constructing of Building for physics & Electronics Department (Phase-II) (Furnishing work of studio room, Solar roof top pannel,,Recharge well) (State Govt. Grant New Construction 2019-20) (Re-Invite)

Name of Work :- CONSTUCTING OF BUILDING FOR PHYSICS & ELECTRONICS DEPARTMENT (PHASE-2)(FURNISHING

WORK OF STUDIO ROOM,SOLAR ROOF TOP PANNEL,RECHARGE WELL) (STATE GOVT. GRANT NEW CONSTRUCTION

2019-20) (RE-INVITE)

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Demolition of Brick work

Demolition of Brick work and stone masonry including stacking of

serviceable materials and unserviceable material to be disposed upto

any lead with the permission of local authority any lavies/charges to be

paid by agencies and no extra payments will be made and disposed at

non objectionable place to be found by the Contractor.(ii) In Cement

Demolition of RCC Work

Demolition including stacking of serviceable materials and unserviceable

material to be disposed up to any lead with the permission of local

2 authority any lavies/charges to be paid by agencies and no extra 3.63 CMT 1057.85

payments will be made and disposed at non objectionable place to be

found by the Contractor. (i) R.C.C. work

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Excavation : 0 to 1.5m

'Excavation for foundation upto 1.5 mt.depth All kind of Soil.Including

Hard Murram and Soft Rock including strutting including sorting out and

stacking of unuseful materials and disposing off the excavated stuff

upto any lead and lift.(Excavated earth / Stuff to be stacked and surplus

earth/unusable material to be disposed with the permission of local

authority any lavies/charges to be paid by agencies and no extra

payments will be made and disposed at non objectionable place to be

found by the Contractor. )

Excavation : 1.5 to 3.0m

'Excavation for foundation for 1.5 mt. to 3.0 mt. All kind of Soil.

Including Hard Murram, Soft Rock & Hard Rock (Not Required Blasting)

including strutting, sorting out and stacking of useful materials and

disposing off the excavated stuff upto any lead and lift (Excavated earth

4 / Stuff to be stacked and surplus earth/unusable material to be 17.69 CMT 273.78

disposed with the permission of local authority any lavies/charges to be

paid by agencies and no extra payments will be made and disposed at

non objectionable place to be found by the Contractor.)

Filling with Available Soil

Filling available excavated earth (excluding rock) in trenches, plinth,

5 sides of foundations etc. in layers not exceeding 20cm in depth, 62.10 CMT 130.39

consolidating each deposited layer by ramming and watering for all lead

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and laying Plain cement Concrete of nominal mix 1:3:6 by

mass (1 cement:3 coarse sand: 6 crushed stone aggregates/ gravels)

with 40mm down size graded crushed stone aggregates for all depths

below and up to plinth level in foundations, drains, fillings, non

suspended floors, pavements and ramps or any other works etc. in any

shape , position, thickness and finishing the top surface rough or

6 smooth as specified and directed, including tamping, ramming, 5.45 CMT 3005.76

vibrating,curing etc. all as specified including the cost of materials,

shuttring,labour, tools, tackles, machinery, steel scaffolding / staging,

sampling and testing all complete as per specification and direction of

EIC/Consultant. Actual / Net measured quantities shall be paid.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and laying controlled cement concrete M.250 Grade

(Concrete shall be design mix) , with 20 mm & down size graded

crushed stone aggregates in SUB‐STRUCTURE below plinth level of all

types e.g. foundations, rafts, beams, slabs, pile caps, retaining walls,

jambs, counter‐forts, buttresses , trenches, manholes, pipe encasement,

catch pits, drains, RCC pits, equipment foundations, pedestals, columns,

pavements, suspended floors, brackets etc. and SUPER STRUCTURE like

beams, slabs, walls including counter forts, staircases, landings, steps,

facias, gutters, shelves, window sills, canopies,Sill, lintels, ducts,

7 brackets, chhajjas, Grede slab with drip molds etc. and any other 12.99 CMT 6000.00

structures providing pockets, openings, recesses, chamfering, vibrating,

tamping, curing and rendering, to give a smooth and even surface

(Excluding the cost of REINFORCEMENT but including cost of

SHUTTERING) for all depths below and up to plinth level in any position,

shape, level and thickness etc. including the cost of materials, labour,

tools, tackles, machinery, steel scaffolding / staging, sampling and

testing all complete as per specifications and directions of the

Engineer‐in‐charge. The rate shall excluding the cost of reinforcement.

Reinforcement : Fe 500 / 500D

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Paint : Weatherproof

Providing and applying of exterior weather resistant 100% Acrylic paint

of Apex Ultima matt finish paint (Base primer coat + Min. 3 or more

coats) of approved make shade for even finishing of external exposed

walls / surface up to any height and level. The scope shall include

Erecting, Scaffolding at all levels, preparing the surface by scrubbing

with wire brush and removal of old paint (if exist), dust, oil, grease and

9 any other particle for surface preparation before new paint application. 0.00 Sqmt 110.64

Paint shall done with applying 1 coat of primer and 3 coat (minimum) of

Apex Ultima Paint to give rash free smooth even finish . Rate shall

including material, labor, tools tackles, scaffolding etc. all complete as

specified and directed by EIC. Measurement to be considered as per

actual on site for payment.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

False Ceiling : Grid false ceiling work‐

Grid ceiling Providing and fixing Gyproc/Armstrong pre coated (Exposed

portion only) GI T Grid system in 600x600mm module which includes

providing and fixing wall angle along the perimeter of the room with

help of nylon sleeves and wooden screws at 300mm centers. Then

suspending the main tee of Gyproc/Armstrong 15mm black bolt slot size

from the soffit with help of soffit cleat, rawl plugs and wire rod with

Leveling spring clip at 1200mm c/c. 1200mm Cross Tee of

Gyproc/Armstrong 15mm black bolt slot size is then interlocked into the

pre‐ cut slots in the main Tees at 600mm centers in direction

perpendicular to the main Tee to make a grid of 600x1200mm.Finally

10 600mm Cross tees are then interlocked into the pre cut slots in the 190.74 Sqmt 3200.00

1200mm tees at 1200mm centers and in direction parallel to the main

tee. Cross Tees having length more than 600mm are to be supported

independently.15mm thick SAINT‐GOBAIN Gyproc India Celotex /

Armstrong Fine Fissured Narrow Reveal Edge mineral fiber tiles of size

595x595mm shall be placed into the grid size of 600x600mm. including

cost of required Cut‐Outs, finishing items/Scaffolding, and for all heights

as per complete as per instruction of engineer‐in charge and consultant.

complete as per instruction of engineer‐in charge and consultant.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

False Ceiling : Gypsum

Providing And fixing single layer water proof gypsum board 12.5mm

thick sections using water proof board of size 1220mm x 1830mm x

8.0mm suspended by GI suspender channel of size 25mm x 3mm with

intermediate channel of size 18mm x 40mm x 0.8mm at 1220mm center

to center ceiling section of size 40mm x 35mm x 0.55mm at 457mm c/c

and perimeter channel of size 20mm x 27mm x 30mm x 0.5mm at edges

11 & drops inclusive. also less than 0.3mt wide patta will be paid in 89.76 Sqmt 606.95

sqmt.item.paper tap sands of it cleat, anchor fastener, scorch bolt

connecting cleat, joining compound to pcoat on ceiling inclusive making

fecy. opening for light fitting, diffuser etc. comp. as per detail drawing

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Acoustical Wooden Panelling

Providing and Fixing Channeled Woodworks perforated panels of width

192mm, thickness of 15mm and length 2400 mm or as required by

approving engineer, made of a high density fibre board with minimum

595 Kg/M3 density substrate with a laminated facing as per the

approved shade & finish and a melamine balancing layer on the reverse

side. The boards shall have a special perforation pattern where the

visible surface has a “Helmholtz” fluted perforation of 3mm width and

5mm/ 13mm/ 21mm of visible panel each. The edges of the panels shall

be “tongue‐and‐grooved” to receive special clips for installation. The

back of the perforated panel shall have sound absorbing non‐woven

12 acoustical fleece having NRC of 0.59. The panels shall be mounted on 235.84 Sqmt 6042.83

special aluminium splines using clips

provided by manufacturer and approved by Engineerin‐Charge.

Install wooden battens of section 50x50mm or as approved on the solid

wall horizontally using screws and plugs at spacing of 600mm centre‐to‐

centre. Screw the aluminium extruded keel for channelled woodworks

provided by Manufacturer over the lowest and second

wooden batten at an on‐centre distance of 600mm. Install the Skirting

of width 50mm or more as required Engineer‐in‐Charge and insert the

tongue end of the panel in the skirting.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Acoustical Fabric wall Panelling

Providing and supplying ‘Acoustical Wall Paneling’ with square edges

made of fibre glass substrate 25mm thick and wrapped on the front side

with an acoustically transparent and classified for Fire reaction Class A,

as per ASTM E‐84, fabric with an option of colors – Husk, Copper,

Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell as

per the choice of size 600x600mm, 600x1200mm & 600x1800mm

providing a minimum sound absorption level of 0.85 NRC to be affixed

to wall using Wall panel Impalers supplied by manufacturer Ceiling

Solutions and construction adhesives as per the instructions laid down

by the manufacturer. The works shall complete in all respects as per

13 manufactures specifications and direction of Engineer‐in Charge. 163.27 Sqmt 6312.50

3/4/5 nos. wall panel Impalers of shall be fixed to the wall surface using

self‐tapping screws. Silica based construction adhesive to be dabbed on

to the projecting elements (spikes) of the impalers. wall panels shall be

pierced through the spikes of the impalers ensuring the line and level of

the panels are maintained. Installation to be carried out by Trained

Installation team or equivalent & Installation should be carried out as

Manufacture's recommended procedure. makeArmstrong or equivalent

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

polyfibre panels / Acoustical panelling :‐ Providing and fixing polyfibre

panels, core‐pigmented, high‐density, SynthPF rigid panels of size

1200x2400x9mm thk, volume density 210 ‐ 230kg/m3, weight 1.9 ‐

2.1kg/m2 installed by using Anutone Strut framework system. The

Anutone Strut framework systems includes Anutone Strut CC25 Cross

Channel having thickness 0.55mm, length 3600mm, knurled web

depth 25mm and equal flanges 15mm is fastened to wall positioned

horizontally in a regular manner at 600mm c/c. Anutone Strand, Square

edge, Magnesite bonded pinewood fibre core tiles of size

600x1200x10mm, density 400 kgs/m3, weight 8kg/m2 are fastened to

Strut CC25 Cross channel with suitable fasteners. Longer edges of the

14 panel should be perpendicular to Strut CC25 Cross Channel. Synth Slim 45.00 Sqmt 4800.00

Panels are then adhered to strand behind with stick S7 adhesive. The

system is backlined with the acoustical infill Anutone SynthPF 5x25.

Technical Parameters of Synth Slim Fire (Class) – B, Acoustics – NRC

(For A mounting), Thermal conductivity (W/mk)– na, Climate (°C, RH) –

50, 99, Light reflectance (%) – Colour Dependant, Green (VoC, RC %) –

Nil, 30 ; Technical Parameters of Strand , Fire (Class) – 1 & P ,Acoustics –

NRC 0.90 (For 25mm C50 Mounting), Thermal conductivity (W/mk)– 0.1,

Climate (°C, RH) – 50, 95, Light reflectance (%) – 80, Green (VOC, RC %)

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Wall / Column Panelling : Providing and fixing panelling as per design

drawing, cladded with first quality 12mm thk. Commercial ply on outer

side, using first quality hardware. made of 2 MM thick Aluminium tube

frame The sections are placed @ 600 x 600 MM C/C both ways and

additionally at openings or ends as required. Sections are joined by

Aluminium angle cleats and the frame is fixed to wall, floor with

suitable aluminium angles and fastened with steel screws.Frame size

x 50 MM with 12 MM thick Ply with 4mm thk. Veneer. This panelling

shall have arrangement for light fixtures, cable‐management as and

15 where directed. panelling work should be carried out as per detail 16.20 Sqmt 6200.00

drawings and as per the instructions given by the architect. Rate of

panelling shall be inclusive of first qulity of hardware, all major/minor

civil & repair work required to be carried out in order to execute the

aforesaid item to the satisfaction of the architect / EIC. The rate shall be

for complete item inclusive of all material, labor, wastages, necessary

tools & tackles, adhesives, consumable hardware.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Wall ‐ Mounted Magnetic Whiteboards ‐ Providing and placing on wall ‐

mounted magnetic whiteboards including centre H channel with

aluminium anodized frame in width of 5/8" the dry erase boards shall

be of thickness 1/2", life time guranted non staining dry erase surface.

and shall be permanent marker resistant. smooth & glossy surface

permits easy writing and erasing. and easy to fix on wall with concealed

16 hook. fixing screw and anchor plugs. approved model and make, Item to 2.00 No. 18000.00

include all fixing accessories, all material and lift to 20 mts., including

keeping in packaged condition till handover, cleaned complete.

complete and all as per manufacturer's specification and as directed by

the EIC / Architect. wall ‐ mounted magnetic whiteboards size: 4' x 6'

Providing & Fixing luxury vinyl floor LVT collection 3mm thk +0.5 MM

wear layer plank size ‐ 184mm X 950 mm as per approved design by

architects inclusive of brass /wooden finished transist strip etc.

(Specification to be match as per 3mm thk LVT flooring). Complete the

work as per site conditions and instructions of Architect engineer.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

ZEBRA Roller Blind

'Providing & Fixing roller blinds, must be comprising 100% polyester.

The fabric must be woven and coated blackout fabric, weight 330 GSM

(+/‐ 10%), width 3.0Rmt thickness 0.42mm (+/‐ 0.05mm). Light Fastness

must be of 5 to 6 grade. The roller mechanism to be operated with

control unit is made of high strength ABS plastic with ultra spring

smooth system. The mechanism shall be operating with the use of a ball

chain. As per requirement, there should be an option of left or right

control. The ball chain should be made up of unbreakable polythene

plastic , 1.50mm polyester cord with 4.5mm ball. he blind should be

able to be stopped at any desired position with the help of a stop lock.

Chain jointer is used to secure the chain. The roller tube extruded by

18 non rusting Aluminum alloy with grade (6063T) with 1.5 mm thickness. 282.74 Sqmt 2260.00

The Channel is designed with support beam to keep it straight and shall

have a pocket for holding the fabrics in position. Available in 32, 38 &

mm diameters for small and big blind respectively. The mounting

brackets should be universal and must be capable of mounting inside /

outside / ceiling / wall with the clutch on either the right or left end of

the tube. The Brackets are made of Mild Steel with the grad (DD) and

are powder coated for a greater finish. Brackets shall be

accommodating overhead or side mounting with clutch assembly on

either end of the blind. Including 50 X 25 X 2 mm thick anodized

aluminum section inserted with same size of teak wood in it for

mounting .The roller tube on existing aluminum section to maintain

curtain width of 1200 mm. The Bottom Channel of Roller Blind must be

of matching shade with fabric and in Pentagon shape, made of none

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Fabrication Work:

Providing, fabricating, erecting placing in position and connecting for all

heights/spans MS structural sections (All Hollow Section Pipes, in roof

trusses, columns, portal frames, beams, bracing, platforms, stairs &

column nosing angle, brackets, Purlin , windows Grill Girts etc. including

19 cutting, wastage, welding (shop and site), bolting wherever necessary, 6919.50 Kg. 127.95

with one coat of Zinc Chromate primer and two coats of synthetic

enamel paint of (Approved Make and Shade) etc. all complete as

directed by the Engineer in Charge.

FOUNDATION BOLT :

Supplying, installing, & fixing Foundation bolt / Anchor Bolts with nuts

and washers in concrete foundation providing auxiliary dummy

structures, if any, necessary tying and binding with contractor's own

16SWG black soft annealed binding wire, welding to reinforcement,

20 adjustment of shuttering, greasing exposed metal surfaces and covering 34.13 Kg. 110.00

with jute cloth etc. complete as per drawing and specifications and

directions. Weight of bolt and nuts shall be measured for payment.

Actual/Net quantities measured shall be paid.

Roofing polycarbonate panel system

Providing and Fixing 12 mm thick Lexan Polycarbonate multi wall

21 roofing sheet fixed with hilti screw and rubber silicon sealer and 216.00 Sqmt 2200.00

aluminum strip of size 50 x 3 mm etc complete as directed by Engineer

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter

Paver Block : 80mm

Providing and fixing pre‐cast Rubber Dye/ steel Dye interlocking

concrete block 80mm thick with grade of concrete M400 pneumatic

compressed/vibrated mechanically and as per approved design

Confirming to IS15658:2006 including 50mm Sand layer for levelling and

filling the joint with sand inproper line and level as per guidelines of IRC

: SP 63‐2018 etc. Complete

Medium back chair Providing & supllying Medium back chair as per

selection. This item to the satisfaction of the engineer‐in charge and

24 consultant. complete as per instruction as directed by site in‐charge or 16.00 No. 12500.00

architect. HOF/GEKEEN

High back chair Providing & supllying High back chair as per selection.

This item to the satisfaction of the engineer‐in charge and consultant.

complete as per instruction as directed by site in‐charge or architect.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing,supplying,arranging and fixing Traing chair The chair pipe

structure of MS CRCA finish 16 gauge capsule pipe having a diameter of

32 mm, the cantilever tubular structure with stability for proper

balance, the seat is supported on spring structure, the seat dimensioned

and curved from an ergonomics point of view, the frame and spring‐

26 seat structure prepared from MIG welding process & powder coated, 4.00 No. 3800.00

proper high‐density rubber bush provided at all four legs, seat

upholstered with fabric. Perforated Polypropylene Backrest. Injection

moulded plastic for back increases rigidity and flexibility for the user.

Product is tested as per stringent BIFMA standards of performance. .

Classroom Table

Providing and fixing table with top made from 18 mm thick ply and

vertical support made from ply with 1.0 mm laminate finish and

mm laminate inner finish, All the edges are edge banded with 0.8 mm

thick Wooden bidding patti finish including all necessary fittings,

fixtures, tools, tackles, edge bending etc work complete as per the

detailed drawing Drawer unit, cable manager system & foot rest as per

27 the instruction of Architect. Table top size ‐ 1200 x 600 x 750 mm 2.88 No. 18000.00

(Height). (Table top measurement shall be paid for Payment) Drawer

unit 450x600. The rate shall be for complete item inclusive of all

material, labour, wastages, necessary tools & tackles, adhesives

consumable hardware & accessories of approved make for all floors, all

heights, all levels and all places within campus. No additional claims will

be entertained for this.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Conference Room Table

Conference Room Table: Providing & Fixing Table top made from

mm thick ply lipped with base fabricated M.S. understructure (as per

the detailed drawing) and vertical support made from 18 mm thick ply

with 1 mm laminate finish on all surfaces and skirting 1.00 mm laminate

finish including all necessary fittings, fixtures,tools, tackles, pop‐up box,

polish finish and including all cut‐outs for cable manager, raceway and

switch board etc. work complete as per the detailed drawing including

peripheral covering panel with raceways etc. The rate shall be for

28 complete item inclusive of all material, labour, wastages, necessary 1.00 No. 165000.00

tools & tackles, adhesives consumable hardware & accessories of

approved make for all floors, all heights, all levels and all places within

campus. No additional claims will be entertained for this.

Approximate Size (7.20m X 2.80m)

The rate shall be for complete item inclusive of all material, labour,

wastages, necessary tools & tackles, adhesives consumable hardware &

accessories of approved make for all floors, all heights, all levels and all

places within campus. No additional claims will be entertained for this.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Ply palmet with Color finish ‐ Providing and fixing wooden pelmets of

upto 150mm/200 mm x 150 to 300 mm L shape made of 19mm thick

MR grade plywood sheet with 12mm thk. extrior grade MDF sheet and

beading patti of 12mm thick and 25mm wide MDF for

curtains/blinds/projection screen of openings. Rate to be inclusive of

lipping, cutting, wastages, necessary fixtures, nails, adhesives,

29 necessary scaffolding, fixing at all heights and for all floors as per 157.50 Rmt. 1500.00

drawing and approved sample etc finish both wall color. as per sample

approved and as directed by the Architect /Client. (Mode of

Measurements: Only the palmet length shall be measured & paid for

the items in which palmet work is not inclusive in item description)

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

30 accessories. 28.00 Pt. 789.82

[III] For 16A Plug and 16 amp switch with 2‐4 sq.mm Cu. Wire with

sq.mm ( green) earthing wire from mcb d b board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete. Cat. III

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate , modules erected with necessary

31 connections as per site situation directed by Engineer In charge. 28.00 No. 390.87

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

of coupling, PVC bushes, Check‐nuts etc. complete of following sizes.

Providing & erecting PVC Corrugated Flexible Conduit with required nos.

of coupling, PVC bushes, Check‐nuts etc. complete of following sizes.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Supplying & erecting UPVC Mini trunking (PVC Casing‐n‐Capping) having

double‐locking arrangement with grooves, trunking of size not below

12.5 mm in height as per IS with accessories of PVC/Resin

36 polypropylene not below 1.8 mm thick duly sealed in joint & erected on 100.00 Rmt 30.30

wall / ceiling of following size.

Supplying & erecting UPVC Mini trunking (PVC Casing‐n‐Capping) having

double‐locking arrangement with grooves, trunking of size not below

12.5 mm in height as per IS with accessories of PVC/Resin

37 polypropylene not below 1.8 mm thick duly sealed in joint & erected on 50.00 Rmt 35.35

wall / ceiling of following size.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

(a) with medium class Rigid PVC pipe and accessories.

(a) 2 wire 4 sq. mm

Providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

39 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI 36.00 No. 112.11

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

40 existing box having following capacity 2.00 No. 737.30

(c)63 Amp. Cat.III

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do

not incorporate any electronic component. for following Max. rating

erected as directed

(ii) 40Amps. DP Cat. III

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with

20 Amp. Plug socket, company fabricated powder coated sheet steel

enclosure erected as directed with connection. [A] Metal Clad Socket

with metal clad top Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution

board ‐ flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623‐1 & 3, IEC 61439‐1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

43 same company of MCB to be used) suitable for 2.00 No. 3412.79

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (iii)8 way

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and erecting XLPE(IS:7098)(I)‐88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

44 necessary clamps or in existing trench / pipe at road crossing or floor 100.00 Rmt 673.67

of following size of cables.

(A) 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

45 tails, insulating tape etc for following size of cables. 4.00 No. 38.38

(C) 2 to 4 core 10 Sq. mm

Solder less crimping type Copper lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

46 switchgear terminals with brass/cadmium plated nut bolts in an 16.00 No. 10.10

approved manner

Providing & erecting, programming, testing of chairman unit

microphone with flexible stem of 480 mm in length and light ring built

in loud speaker ,two head phone socket ,attractive design ,priority

button for chairman microphone,built in volume control for head

phones,chime tone facility to precede chairman priority

calls,microphone on/off button,red indicates for microphone is

active,frequency response ‐400Hz to 10kHz,nominal acoustic input ‐85

dB SPL [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing & erecting, programming, testing of Delegate unit microphone

with flexible stem of 480 mm in length and light ring built in loud

speaker ,two head phone socket ,attractive design ,built in volume

control for head phones,chime tone facility to precede chairman priority

48 calls,microphone on/off button,red indicates for microphone is 16.00 No. 5565.10

active,frequency response ‐400Hz to 10kHz,nominal acoustic input ‐85

dB SPL [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying & erecting dual channel amplifier ,power handling capacity of

180 watt ,four micro phone inputs with independent level control ,built

in FM tuner,with preset memories,USB drive & SD card for MP3

playback ,100v /telephone input with priority and VOX,frequency

response‐80 Hz to 18k Hz Philips / /distortion less than 1% @ rated

power up to 50 units [[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

Supplying and erecting ceiling speaker with rated power of

watt/power tapping 30/15/7.5 watt available,opening angle 180 degree

H * 77 degree V ,sound pressure level 88 dB ,frequency response of

70Hz to 20KHz [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

Supplying and erecting wall mount speaker with rated power of

watt/power tapping 30/15/7.5 watt available,opening angle 180 degree

H * 77 degree V ,sound pressure level 88 dB ,frequency response of

70Hz to 20KHz [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and erecting cordless microphone with UHF Diversity

handheld wireless microphone/caller wireless complete with receiver

and transmitter unit,Cardiod ,polar pattern,dynamic microphone,LCD

display for battery and frequency status and information ,32 preset

channels,with compatible groups of 8 channels,14 hrs.battery

52 life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0 Uv,image 1.00 No. 5135.85

rejection > 55 dB,dynamic range >95 dB and receiver having

channels,S/N ratio>100 dBA,Dynamic range>95 dB,distortion<1%

[[Approved by Competent Authority i.e. not Below the rank of Executive

Supplying & erecting control Amplifier comprising Two nos. MIC

volume control, One Aux. Volume control BASS & TREBLE control,

Master Volume Control, Line Level Control, LED Array, input jack,

selector switch, PREAMP /REEK output to facilitate recording. PA

Amplifier section operating on AC 220‐ 240V or 12 V DC, with power

53 output 70W ROMS max. & input of 3 X MIC 0.6mv / 4.7 K.Ohms & I x 1.00 No. 7533.59

Aux. 50mv /47 K.Ohms with frequency response 90‐16000 Hz with two

7 pin line connectors & capable up to 50 conference units. [Approved

by Competent Authority i.e. not Below the rank of Executive Engineer ]

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having

following features & facilities. [[Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ](a)input Channels :‐ Each

channel has separate 6.25mm size balanced phone jack for mike

& line for balanced & unbalanced signals. (b)Individual gain control for

sating optimum level for minimum noise. (c)BASS, MID & TREBLE ‘

controls Separately for each input channel. (d)ECHO control for each

channel. (e)PAN control for echo channel for left or right output. (f) AUX

Control : To control , level of the channel in final mix to AUX sound

output. (g)Channel ON/OFF switch. (h)ECHO Section :‐ ECHO, reverb &

Chorus effect can be added to all input channel by different setting of

54 Delay, Reverb & Level control. (i)Tape section. (j)Aux. send & return For 2.00 No. 18386.04

sending Pre‐feeder output of channel for monitoring or adding a special

effect unit. (k)Mono / Stereo output controls. (L)Master faders to

control over left & right output . (m) Head phone output for monitoring

Technical specification (a)Power Requirement ‐AC220‐24OV 50 Hz DC

24 Volts (b)MIC Output Impedance/gain ‐2 K Ohms/ 62 dB (c)Line

Output Balance/42 dB —‐ 20 K ohms (d) Impedance / Gain :‐

10Kohms unbalance / 42 Db (e)frequency Response ‐ 30 Hz‐ 20 KHz

L / R Line Output ( + 0, ‐1 dB ) (f)Equalization Bass/ ‐ + / ‐ 12 dB at

100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output

Line Output Low : ‐10 dB / ‐2 dBM Line Output High : 0 dBM /

+17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0

dB, 0.775V) The Console shall be mounted on standard Rack, The

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

SITC of 3LCD Lamp based projector having wxga (1280x800) or better

resolution with minimum white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the

projector should have auto vertical key stone correction of +/‐

degree and Manual Horizontal of +/‐30 degree. the projector should

55 have optical lens, throw ratio 1.30‐1.56:1. Zoom Factor of 1.2. Lens 1.00 No. 105000.00

focus Manual having focal length 16.9mm to 20.28mm. projector should

have features like AV mute slide, quick corner and split function and

should support wireless functionality with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e. not Below the rank of Executive

SITC of universal Projector mounting kit, with necessary grouting,

fasteners etc. with adjustable height and suitable for all types of

projectors. [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen,

Aspect Ratio‐4:3

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic release suitable to

58 work on A.C.supply 50 c/s. with all internal connections, spreader 2.00 No. 8055.76

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos. of bus having current density

not more than 0.8 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each busbar,erected in

existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. Capacity

Supplying and erecting approved make panel mounting type Digital

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected

60 on existing panel board with all connection, wiring etc .with 2.00 No. 1275.63

manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated, calibrated

for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Supplying & erecting approved make Power Factor Meter 150mm dia

flush/projection type/ balanced & unbalanced load to work with

63 appropriately provided CT’s 100/5A to 400/5A ratio & other accessories 2.00 No. 5102.52

complete erected in M.S. box & connected to the circuit by means of

PVC copper Core leads.

Supplying and erecting approved make suitable panel indicator LED type

64 lamp, lens cover, complete erected with necessary connections. 6.00 No. 43.43

Providing and erecting Steel cover as per drawing using 16 SWG

M.S.sheet of following depth, to house the switch gear etc. complete

with locking arrangement and lock with duplicate keys per cupboard

and door handles erected with necessary support and painting. [One

coat red oxide and two coat enamel paint]

(A) with angle iron frame

(i) For 25 cms. Depth

Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

66 finishing duly painted with one coat of red oxide with erection on site 50.00 Kg. 77.77

as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and fixing approved make Perforated C type cable tray. Made

from pre‐ galvanized CR sheet steel. The cable tray should be bended as

per IS 2062/1079 . with coupler plate / Fish plate and GI hardware like

67 nut ‐ bolt and washers etc. erected on existing support as per 150.00 Rmt. 322.19

Specification and as per instruction of engineer in charge...

(3)150 X 50 X 1.5 mm Thick

Providing and fixing approved make 'T' Junction for Perforated C type

cable tray. Made from pre galvanized sheet steel. The Junction should

be bended as per IS 2062/1079. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut ‐ bolt and washers

68 etc. erected on existing support as per Specification and as per 5.00 No. 167.66

instruction of engineer in charge.

(3) 150 X 50 X 1.6 mm Thick ' T' Junction

Providing and fixing approved make '90° Elbow' for Perforated C type

cable tray. Made from pre galvanized sheet steel. The Junction should

be bended as per IS 2062/1079. with coupler plate / Fish plate and GI

69 hardware like nut ‐ bolt and washers etc. erected on existing support as 5.00 No. 146.45

per Specification and as per instruction of engineer in charge.

(3) 150 X 50 X 1.6 mm Thick 90° Elbow

Providing and erecting XLPE(IS:7098)(I)‐88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

70 necessary clamps or in existing trench / pipe of following size of cables 200.00 Rmt 372.69

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Providing and, fixing heavy duty flange type brass double compression

type cable gland with rubber ring for PVC insulated armoured cable

71 complete with out going tails, insulating tape etc for following size of 4.00 No. 103.02

(C) 3 & 1/2 core 70 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

72 connected to switchgear terminals with brass/cadmium plated nut bolts 12.00 No. 25.25

in an approved manner.

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

73 connected to switchgear terminals with brass/cadmium plated nut bolts 4.00 No. 20.20

in an approved manner.

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Supply, Installation, Testing & Commissioning of following size of Grid

Tied Solar Power Plant with Solar Panels (ALMM approved): Frame

Material : Anodized Aluminum alloy Frame With Twin Wall Profile,

Front Cover : High Transmission Low‐Iron Tempered Glass (AR Coated),

High efficency and positive power tolerance Pmax: 0/+5, Module

Efficiency should be approx. 18%‐21%, Normal operating temperature

45'C, Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test to ensure

error free Modules, Thep. temp. co‐efficient of the PV module shall

equal or better than ‐0.45%/degree C. Solar PV modules of minimum fill

factor 75% to be used. Unit Production:‐ 4 to 5 Unit /kw /day

(Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear

74 Power Warranty., Solar Inverter: MPPT Range: 80‐1000 V, Max 60.00 PER KW 40800.00

efficiency: 97.5% ‐ 98.9%, O/p Frequency: 50/60Hz, Operating Altitude

(m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating

Tempreture Range: ‐25~60°C, Anti‐islanding Protection: Integrated,

Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection Integrated,

Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi‐Fi, Module Mounting Structure: Seamless

Box Pipe / 'C' Channel of suitable size for rooftop solar installations

with good stability agaist wind & weight load., Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for foundation , solar

panel mounting, the structure should be suitable for carry the load of

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

HI‐WALL SPLIT UNIT

Providing and erecting approved make split air‐conditioning unit

consisting of copper condensing unit with fan motor, hermetically

sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its

75 accessories by means of extra supplied proper insulated copper 16.00 No. 70000.00

tubing,drain PVC pipes suitable for (cost includes powder coated Stand,

Eco Friendly green gas charging, 15A plug top & Remote Control) with

necessary core cutting.

fOR 2.0 TR CAPACITY , mistubishi heavy duty/O' General

Supplying & installing MS standard type stand mounting for outdoor

76 unit of Split A.C. upto 4 TR capacity erected with necessary hardware 16.00 No. 1250.00

materials as directed.

Supplying and erecting insulated pair of soft copper tubing open or

concealed including power and control cable,necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile

78 rubber insulation. 100.00 Rmt 77.77

UNDERDECK INSULATION

Supplying & fixing 50mm thick TF quality expanded polystyrene for

underdeck insulation on slab/wall /shaft exposed to sun/atmosphere as

per specifications.

Drilling pilot bore hole of size 250 / 300 mm at above village site in all

starata by mud flush direct rotary rig

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Reaming of 250 / 300 mm dia pilot bore hole to size 550 mm dia.

including assembling,jointing,lowering of housing casing screen pipes &

other assembly items with gravel packing and clay balls packing etc

Development of bore by air compressor of 600 cfm /150 psi capacity for

82 minimum 06 hours or up to the availability of sand free discharge 2.00 LUM SUM

A)manufacturing Supply & Delivery Of ISI Marked(IS12818 with latest

83 Amendment) rates Are Exlusive of GST of 200 mm dia UPVC casing pipe 100.00 RMT 1414.00

Clamps made from MS plate with 3 holes on either side with nuts &

84 bolts of standard make and suitable size. 750 mm X 75 mm X 16 mm flat 2.00 PAIR 1616.00

to 200 mm dia. pipe.

Supply of Bore plug having 100 mm height made from M.S. Plate with

hole sate qual distance on circumference for nut‐bolts type,locking

85 arrangement with nut‐bolts & lock nuts of std. Make complete from 5 2.00 NO 757.50

thick M.S.Plate(For Tap also) suitable for 200 mm dia pipe

Supply of Bail plug UPVC of standard make suitable for 200 mm dia pipe

87 Supply of gravels of selected size 4 mm to 6 mm 12.00 CUMT 2020.00

88 Electro logging of pilot bore 2.00 JOB 18180.00

89 Water sample chemical analysis charges 2.00 NOS 606.00

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

PVC PIPE: providing and fixing to wall, cealing and floor, SWR quality, heavy

duty 6KG/RMT pvc pipes of finolax / astral or equivalent make as approved by

eic,, open laid for soil / waste / rain water etc complate, with necessary specials,

bends, such as Y junction T junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall clips, in proper line and level

with necessary support like split clamps of chilly make 3mm minimum thickness

fixed with approved anchor fasteners of HILTI equivalent ,RCC or brick

90 pedestals or battens if necessary to wall, cealing and floor, open laid complate 48.00 RMT 1233.00

jointing with suitable grade of good quality sovelt cement (as recommended by

the manufacturer) including testing, cutting, making good the wall, ceiling and

floor, etc complate to the statisfaction of EIC of the following OD , inlcuding

cowl for the same size (G)

Testing of Recharge Pit by emptying a tanker of 8000 L and measuring

91 the time as per the specifications and reporting of the same 2.00 NOS 866.58

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

For Genreal Area :‐ Sand Filtration Module M‐25 grade cement concrete

system for rainwater harvesting with SS 304 screen and natural filters. It

consists of single module with internal volume of approximately

cubic metres that is to be fixed below ground level. The module is of an

round shape with a diameter of approximately 1200 mm , Total height

of the system is 16 mm. Filtration capacity & testing upto 8m3 to 10m3

per hour from modular systems only. The inlet and outlet of the system

92 is 90mm diameter UPVC pipes. Module holds a filter of 150 MM Dia x 2.00 NOS 186951.00

0.75mm Slot and 300 mm Dia x 1.0 mm Slot SS V wire screen in the

length of 500mm with sand Media . Screen creates entry points for the

filtered water. This module is used for Surface water and the filtered

water to get into is finally connected with the Recharge well.

Submission and approval of survey, Hydrogeological investigations at

number of locations in PADRA , working Drawings including all layout

sections, typical details, shop drawings, As‐built drawings and

submission of working drawings and implementation schedule as per

priority given by Engineer‐In‐Charge for approval, etc. complete.

Including 1) Detailed VLF profiling Survey work in a grid pattern2)

93 Detailed Geophysical Resistivity Test &sub‐surface micro‐level VES 2.00 JOB 18770.85

Investigation work SelectedVLF anomalous point for pinpointing the

most feasible location for Recharge& Roof Top Rain waterrecharge to

be constructed in premises .3) G.P.S marking of each location by G.P.S.

instrument ....continue......

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Jobwork for cleaning of modules for every Premonsoon for once in

years with inbuilt intergral ladder at 1125mm with safety by water

cleaning system ,labours , hand bucket , lari & other tools i.e. Trikam

Pavda , Rassa , Battery , G.T. Salia etc.with disposing silt as shown

places. Nothing extra to be paid for any insurance or depriciation of

Providing, fixing and fabricating of G.I. Chain Link Jali 10 Gauge Fencing

with necessary fittings and having angle support of 50x50x6 mm thick

95 and c/c. distance 1.10 between two column with loading, unloading, 128.00 SQMT 1800.00

lead and lift. Including all labour and fitting work.

PVC PIPE: providing and fixing to wall, cealing and floor, SWR quality, heavy

duty 6KG/RMT pvc pipes of finolax / astral or equivalent make as approved by

eic,, open laid for soil / waste / rain water etc complate, with necessary specials,

bends, such as Y junction T junction (both single and double) including plugs,

shoes, cowls flange compression type fittings, wall clips, in proper line and level

with necessary support like split clamps of chilly make 3mm minimum thickness

fixed with approved anchor fasteners of HILTI equivalent ,RCC or brick

96 pedestals or battens if necessary to wall, cealing and floor, open laid complate 290.00 Rmt 833.25

jointing with suitable grade of good quality sovelt cement (as recommended by

the manufacturer) including testing, cutting, making good the wall, ceiling and

floor, etc complate to the statisfaction of EIC of the following OD , inlcuding

cowl for the same size (G)

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT

(upto ITEM DESCRIPTION (upto 50 AMOUNT ( Upto 2 Decimals )

(only figures) ( Upto 2 Decimals )

200 characters)

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C.

97 top slabe with 1:2:4 mix (1‐cement :2‐ coarse sand :4‐graded stone 20.00 No. 4300.00

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm deep for single pipe line

Note :- GST Shall be paid Extra on submitted Rate

ADMINISTRATIVE BUILDING (EXTENTION WORK) KEEN ARCHITECT