Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC VPO CHAKLOO TEHSIL CHAMBA DISTT CHAMBA HP | CHAMBA | HIMACHAL PRADESH | 176207 | L1 | Accepted-AOC lowest contractor | |
| 2 | L2₹5.6 L+₹66,168.80 (13.3%)Rejected-Finance HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | L2 | Rejected-Finance L2 Bidder | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹5.8 L
EMD Value
₹11,550
Closing Date
18 Aug 2022, 4:00 pmClosed
Executive Engineer
HIMUDA Division Dharamshala
SH Repair work of toilet block
2022_HIMUD_63373_1
HIMUDA/DD/CB/W-7/2809-33
Open Tender
Civil Works
Item Rate
30 days
Daroh Palampur
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
Yes
₹11,550
Yes
27 Sept 2022
3 Aug 2022
20 Aug 2022
4 Aug 2022
18 Aug 2022
4 Aug 2022
4 Aug 2022 - 18 Aug 2022
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material with in 50 metres lead as per direction of Engineer - in charge :-Nominal concrete 1:3:6 or richer mix (including equivalent design mix) including carriage of material in all leads and lifts.
Providing and laying in position cement concrete of specified grade 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth leve including carriage of material in all leads and lifts.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25mm to 40 mm thick :Second class teak wood including carriage of material in all leads and lifts.
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,exterior grade (Gradel Typell), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25mm wide x 12mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of material in all leads and lifts.
Providing and fixing aluminium sliding door bolts,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm including carriage of material in all leads and lifts.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (i) 150x10 mm
Providing and fixing aluminium handles,ISImarked,anodised (anodic coating notless than grade AC 10as perIS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts. (i) 125 mm
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours suchas White, Ivory, Grey, Fume Red Brown,l aidon 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @3.3kg / sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of material in all leads and lifts.
Applying priming coat: With ready mixed pink or Greyprimer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material in all leads and lifts.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including carriage of material in all leads and lifts. (a) Two or more coats on new work
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall :-15 mm dia nominal bore including carriage of material in all leads and lifts.
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. (i) 90 mm dia.
(ii) 110 mm dia
Providingand fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts. (i)110 mm X 90 mm.
Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wher ever required W.C. pan with ISI marked white solid plastic seat and lid including carriage of material in all leads and lifts.
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material in all leads and lifts.
Providing and fixing 100 mm dia cromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts.
Providing and fixing PVC collers including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.(i) 90 mm dia
(ii) 110 mm dia
Vijay Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .