Construction of Cat. E1 Type Bunglow for District Development Officer at Palanpur Dist. Banasakantha (Second Try)

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

1 and disposing of the excavated stuff as directed with in all lead & Lift (A) Loose or Soft soil. 338.00 Cu.m 122.94

Excavation for foundation upto 1.50mt.Depth including sorting out and stacking of useful materials

2 and disposing of the excavated stuff as directed with in all lead & Lift (B) Dense or Hard soil. Or 131.00 Cu.m 157.16

Excavation for foundation 1.50mt. to 3.0 mt. depth including sorting out and stacking of useful

3 materials and disposing of the excavated stuff as directed with in all Lead & Lift (C) Hard Murrum 128.00 Cu.m 287.21

Filling foundation and plinth with sand under floors including watering, ramming and consolidating

4 dressing etc, comp. 27.00 Cu.m 444.75

Filling available excavated earth excluding rock in trenches plinth side of foundation etc. in layer not

5 exceeding 20cm. In depth consolidation each deposited layer by ramming and watering. 121.60 Cu.m 136.92

6 watering, ramming and consolidating etc. comp. 419.00 Cu.m 282.07

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part - II( (0.075% concentration by mass) is

7 recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of 197.00 Sqm 80.84

surface is recommended as per I.S

Providing and laying controlled cement concrete M-150 and curing complete excluding the cost of

8 form work and reinforcement concrete work in:(a) Foundation footing base of column and mass 200.00 Cu.m 4146.05

Providing and laying controlled cement concrete M-250 and curing complete including the cost of

9 form work but excluding the cost of reinforcement concrete work in Foundation footing bases of 46.00 Cu.m 4630.85

Providing and laying controlled cement concrete M-250 and curing complete including the cost of

10 form work but excluding the cost of reinforcement concrete work in Column upto floor two level. 10.00 Cu.m 7128.58

Upto ground level.

Providing & laying cement concrete 1: 3 : 6 ( 1 Cement : 3 Coarse sand : 6 graded B.T stone

11 aggregate 20mm nominal size) Curing comp. including cost of form work in foundation and plinth. 37.00 Cu.m 3247.28

Providing and laying Controlled cement concrete M200 using B.T. stone aggregate and curing etc.

12 complete including the cost of form work but excluding the cost of reinforcement. (a) Column for All 16.00 Cu.m 9052.56

Providing and laying Controlled cement concrete M 250 using B.T. stone aggregate and curing etc.

13 complete including the cost of form work but excluding the cost of reinforcement for (c) PLINTH 26.00 Cu.m 5897.39

BEAM having cross sectional area more than 0.12 sqm

Providing and laying controlled cement concrete M-150 and curing complete including the cost of

14 form work but excluding the cost of reinforcement for reinforced concrete work in Plinth PLINTH 18.00 Cu.m 4343.00

Providing and laying controlled cement concrete M-200 and curing complete including the costof

15 form work but excluding the cost of reinforcement for reinforced concrete workn in Wall caps / 5.00 Cu.m 6270.08

Coping / Lintel bends Ground Floor.

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

16 form work but excluding the cost of reinforcement for reinforced concrete work in BEAMS For All 23.00 Cu.m 6533.81

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

17 form work but excluding the cost of reinforcement for reinforced concrete work in LINTELS All 6.50 Cu.m 7663.76

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

18 form work but excluding the cost of reinforcement for reinforced concrete work in CHHAJJAS All 1.30 Cu.m 6813.38

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

19 form work but excluding the cost of reinforcement for reinforced concrete work in slabs for All Floor. 37.00 Cu.m 6475.12

Providing and laying controlled cement concrete M-200 using B.T. stone aggregate and curing

20 complete including the cost of formwork but excluding the cost of reinforcement for reinforced 2.00 Cu.m 9156.12

cement concrete work in staircases for all floor

Providing T.M.T. bar FE500/500D reinforcement confirmed to for R.C.C. work including bending,

21 binding, and placing. In position comp. Up to floor two level. For All Floor 38318.00 Kg 77.34

Brick work using common burnt clay building bricks having crushing strength not less than

22 Kg./Sq.m. in foundation and plinth in cement mortar 1:6 (1 cement:6 fine sand) (b) Conventional. 58.00 Cu.m 4214.33

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./

23 Sqm. in cement mortar 1:6 ( 1 cement : 6 Fine sand ) in super structure above plinth level upto floor 124.00 Cu.m 4511.90

two level ( for all floor ) Conventional

Half brick masonary in common burnt clay building bricks having crushing strength not less than

35kg./sq.cm. in cement mortar 1:3 (1 cement : 3 coarse sand ) with 2nos. of 6mm dia mild steel round

24 bars every three coarse embedded in cement mortar in superstructure for Ground floor 56.00 Sqm 753.58

(Conventional)

Providing Glass brick work with 19 x 19x 10cm size brick and required jointing chemical and 8mm

25 dia G.I. wire evey layer as per direction of Enginee in charge 8.00 Sqm 6512.48

Providing and fixing door double shutter 35 mm.thick flush door teak wood beading 75 x 35mm

including both side in situ laminate with 18mm thick granite frame 6 Lever Mortice lock , Floor

Spring, SS Aldrop 30cm long, SS Handle size 60 Cm Long, Tower Bolt size 20 cm etc. as per detail

colour & pattern approved by this office including necessary anodized alluminum fixtures and

fastenings.

Providing and fixing door Single shutter 35 mm.thick flush door teak wood beading 75 x 35mm

including both side in situ laminate with 18mm thick granite frame 6 Lever Mortice lock , SS Aldrop

27 30cm long, SS Handle size 15 Cm Long, Tower Bolt size 20 cm etc. as per detail colour & pattern 19.00 Sqm 7020.51

approved by this office including necessary anodized alluminum fixtures and fastenings.

Providing & fixing FRP Frame size100 x 50mm and 28mm think FRP depress pannel shutter having

extra reinforcement on sides ad edges and in gel coat finish. The cores of the shutter is to be filled up

with intected fire extinguishing grade polyurethane wooden pieces for stiffening and also for taking

28 hinges and fixtures. The FRP shutter is to be water proof, weather proof, termite proof and resistance 8.00 Sqm 2377.76

to mild acid / Alkali including S.S hinges with necessary screws and alluminium fixtures and

fastenings & Fastener Sleeve.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x

29 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm 7.00 Sqm 2140.33

@1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick

Providing and fixing window having extruded aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

30 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm 14.00 Sqm 1713.70

@ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @

wt.of .456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm,@

31 Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour 5.00 Sqm 1525.00

tinted float glass as details etc complete for Fix window.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm @

Wt. 0.643 Kg/mt) with colour anodized alluminium frame for ventilation with 5 mm thick frosted

32 glass as details etc complete for Ventilation {Colour as directed by Engineer in charge except black & 3.00 Sqm 1175.56

Alluminum section and glass

Providing and fixing M.S. box pipe 50mm x 50mm grill at 10cm interval vertical at required spacing

33 as per design including hold fasting with coach bolts including one coat of primer and two coats of 4.00 Sqm 1576.61

mattfinished oil painting etc complete.

Providing and fixing Safty grills of required pattern for windows Rectangular CRC pipes of size 50 x

30 x 2mm at required spacing as per design including fixing rat mesh and hold fasting with coach

34 bolts including one coat of primer and two coats of mattfinished oil painting etc complete. 730.00 Kgs. 111.40

Providing and laying Machine cut, Free edges, Machine polished Granite stone slab 18 mm (Average)

thick (Single piece not more than 150 cm for stair steps and riser as per design incl. full moulded

round front edge & 1 cm nosing & necessary groobe on trade of steps laid on 20 mm thick cement

mortar 1:6 (1-cement: 6 coarse sand) jointed with grey cement slurry including rubbing and polishing

etc. complete

Providing and laying machine polished machine cut Blue Kota stone slab ( 60 x 45cm Size) flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

36 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 10.00 Sqm 1018.88

match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury

37 mixed with pigment to match the shade of slab including rubbing and polishing etc. complete 5.00 Sqm 1130.79

Providing and laying 60 x 60cm GVT Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as

detailed approve by architect ( 10% Dark colour tiles Pattern ) in flooring treads of steps and landing

38 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush 161.00 Sqm 1120.36

pointing in white cement.

Providing and laying 60 x 60cm GTV Vitrified tiles 8 to 10 mm thick with pattern colour & Shade as

detailed approve by architect ( 10% Dark colour tiles Pattern ) in skrting risers of steps and dedo on

39 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 11.00 Sqm 1195.02

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and laying 30cm x 30cm in size Ceramic tiles 6mm thick in flooring treads of steps and

40 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 14.00 Sqm 987.14

flush pointing in white cement

Providing and laying 30 x 45Cm size glazed tiles 6mm thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Provding and filling the joint with epoxy grout 3 mm width and 8 to 10 mm deep, including cost of

42 necessary materials, PVC spacers, filling grout and cleaning etc complete as directed by engineer in 236.00 Sqm 40.40

charge. { Colour and Pattern as directed by engineer in charge.}

Providing and laying water proofing tretment with chaina mosaic tiles flooring over avg 40 mm

C.C. 1:2:4 ( 1 Cement, 2 sand, 1 Kapchi 20mm + 3 grit 6mm to 10mm ) bedding for maintaining

slope for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one

or more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

43 containg one Kg. of water profing materials per bag of O P C at plain or / and slops and to be 266.00 Sqm 1085.75

tempered to bring mortar ceramic up to surface with using white cement and colour pigment

including rounding of junctions and extending them up to 15 cm along the wall and curing with

bends any pattens or design as per drawing and cleaning by using oxalic acid etc complete.

Providing and laying Mirror polished Machine polished Grenite stone slab 18mm (Average ) thick for

doors & windows sill & Jams clading as per design including full moulded round front steps & 1cm

44 nosing & necessary groove on trads of steps ;laid on 20mm thick cement mortar 1:6 ( 1 cement : 6 75.00 Sqm 3288.56

coarse sand ) jointed with gray cement sluury including rubbing and polsihing etc. complete.for

Doors / windows sill & jams clading.

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

45 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse 642.00 Sqm 295.93

sand) finished with trovel including scaffolding curing etc. complete. For Ground Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

46 including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 186.00 Sqm 222.21

Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction the

47 Brick.masonary and reinforcement cement concrete member including fixing materials scaffolding 71.00 Sqm 92.92

labour etc. complete

Providing 20 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall

for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-

48 cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement 11.00 Sqm 270.68

mortar in proportion recommended by the manufacturer for All Floors.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

49 surface to give an even shade including thoroughly brushing the surface free from mortar dropping 828.00 Sqm 40.59

and other foreign matter and sand papered smooth.

Wall painting with Applying two coats of putty & two coats of primer of approved brand (three

coats) plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give

an even shade including throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Wall painting with Applying two coats of putty & two coats of primer of approved brand & (three

coats) with plastic emulsion paint of approved brand and manufacture on undecorated ceiling surface

51 to give an even shade including throughly brushing the surface free from mortar droppings and other 186.00 Sqm 131.26

foreign matter and sand papered smooth.

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

52 1:1 (1-cement : 1-sand) with 1cm x 1cm groovs as per pattern sample approved by the engineer 436.00 Sqm 320.70

incharge etc. complete.

Providing and fixing 90 cm high Stainless steel railing made from anticorrocive S S pipe of 50 mm

dia (16Gauge) as hand rail with S S 38 mm dia (16Gauge) as a vertical support fixed in RCC slab at

53 1.2m c/c including three horizontal S S pipes of 25 mm dia (16Gauge) at eqal distance fixed by 14.00 Rmt 3144.13

18.75 mm dia (16Gauge) S S pipe including accessories as per detailed drawing as directed etc.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with

54 connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to 4.00 Qtls 9108.48

common rafters and the like

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

55 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 35.00 Rmt 72.65

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

56 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 60.00 Rmt 91.84

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials. [B] 25mm dia.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

57 help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings 40.00 Rmt 148.12

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

all materials.[D] 40 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

58 fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. 78.00 Rmt 170.36

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

59 fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. 43.00 Rmt 253.82

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

60 fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. 40.00 Rmt 447.72

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

61 fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (B) 4.00 Nos 373.70

25mm dia.,

Providing and fixing uPVC Heavy Duty Handle valve of aprroved brand and Quality with required

62 fitting and adhesive incl. fixing the same with new pipe line as directed by engineer in charge. (C) 4.00 Nos 549.44

40mm dia.,

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

63 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 40.00 Rmt 933.05

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete with special flange compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(A) 110mm dia.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

65 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as 88.00 Rmt 1053.73

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x

66 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as 80.00 Rmt 834.38

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all type necessary

67 fittings and accessory etc. completed as per directed engineer in charge. 143.00 Nos 75.75

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

following nominal diameter of self cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Providing and fixing Jaguar ALICHR85079k, ALD-179 Brass complete Divertor set , silver crome

finish divertor outer body of high flow single lever concealed mixer & divertor for bath & Shower

69 system with divertor assembly & cartridge sleeve inclusive exposed parts kits hindware make or 3.00 Nos 10423.20

equivalant make complete as ditrected by engineer in charge

Providing and fixing Spout heavy duty of following size Brass chromium plated (i) 15mm dia. (

70 Hindware, Plumber, Mark, Escco or equivalent brand ) 3.00 Nos 3827.90

Providing and fixing AKP- 35753P Toilet paper Roll holder with Flap of Jaguar or equivalent brand

71 as directed by Engineer in charge including fixing as and where directed etc. complete.(A) C.P. Brass 3.00 Nos 2003.84

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing Flush cock Metropole heavy duty of following size (A) Brass chromium plated

72 ( Plumber, Mark, Escco or equivalent brand ) 3.00 Nos 899.91

Providing and fixing C.P. Brass health faucet hindware showers F-16 0013 with cleaning system

73 1.25mt. Long P,V.C. flexible tubes and ABS wall hook with angular stop cock hundware plazza F-18 3.00 Nos 1916.98

003 with extension nipple 62mm log etc. complete.

Providing and fixing AKP-35731P Soap Dish Holder of jaguar or equivalent brand as directed by

74 Engineer in charge including fixing as and where directed etc. complete. 4.00 Nos 1393.80

Providing and fixing AKP-35735P Soap Dispenser with glass bottle of jaguar or equivalent brand as

directed by Engineer in charge including fixing as and where directed etc. complete.

Providing and fixing screw down quarter turn heavy duty bib taps of following size (A) Brass

76 chromium plated screw down bib tap (i) 15mm dia. ( Plumber, Mark, Escco or equivalent brand ) 4.00 Nos 790.83

Providing and fixing C.P. brass shower rose heavy duty with 15mm or 20mm inlet.(A) 200mm dia.

Providing and fixing Toilet paper Roll holder with Flap of Jaguar or equivalent brand as directed by

78 Engineer in charge including fixing as and where directed etc. complete.(A) C.P. Brass 3.00 Nos 375.82

Providing and fixing CP brass Quarter turn pillar tap, capstan head screw down high pressure with

79 screw, shanks and back nuts (A) 15 mm dia {Long pipe or equivalent brand} 5.00 Nos 939.30

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar tap with C.I or

M.S brackets painted white including cutting cutting holes and making good the same including C.P.

80 brass waste and waste pipes and bottal trap (A) Vitreous China: (ii) Flat Back washbasin 550 mm x 4.00 Nos 1890.72

400mm size.In colour.

Providing and fixing Wall Mounted Water Closet with integral "P" and "S" trap including jointing

the trap with soil pipe in cement mortar 1:1 (1-cement, 1-sand) of approved brand including seat

cover for wash down WC with CP brass hinges and rubber buffers including providing 12.50 Litres

low level flushing cisten with a "P" pair of CI or MS bracket with complete fitting such as lead valve

Sipron 15mm dia brass ball valve with polythene float CP brass handle, unions and couplings for

81 connection with inlet outlet and overflow pipes 40mm dia porcelain enamelled flush bend, including 3.00 Nos 23107.79

Health Faucet operated with necessary valve of approved make including cutting holes in walls and

making good the same connecting the flush bend with cistern and closet etc. complete.(Brand of All

parts to be approved by the Engineer In-charge)

Providing and fixing water closet squatting orissa type W.C. pan size 580mm integral footrest and

100 mm P or S trap and in cluding 25 mm dia CP brass flush valve and GI inlet connection etc.

comp. (A) Vitreous china long pattern white or color

Providing erecting and fixing double coated 4-layer tough virgin plast ISI water tank of required

83 capacity each with all necessary fittings and connection etc. complete on terrace. 1500.00 Litre 9.54

Providing and fixing Art Street frameless wall mirror for bathroom bevelled frameless wall mirrior

84 (16 x24 inches silver ) etc. complete. 3.00 No 3194.63

Providing and fixing Towel Rack : AKP-35781P of jaguar or equivalent brand as directed by

85 Engineer in charge including fixing as and where directed etc. complete. 5.00 No 3659.23

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

86 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 4.00 No 1246.92

150mm x 100mm size P of R type

Providing and fixing CP brass screw down stop cock of approved quality 15mm size with adjustable

87 wall flange..or as per instrction of engineer incharge. 24.00 No 205.83

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions, total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

88 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 4.00 No 2932.93

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

89 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 7.00 No 3660.76

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or

two inlets.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse

90 sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 3.00 No 7180.44

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(iii) Inside dimensions 600mm x 850mm and 450mm deep for pipe lines with three

or more inlets

Providing and filling screened of burnt coal cinder including and consoliation etc. complete.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

92 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of 436.00 Sqm 73.83

loose powdered materials.etc complete

Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 25 mm thick

Kota stone slab using cement mortar 1:3 for sandwich and fitting at bottom & edges with waterproof

rigid adhesives including macking necessary grooves in walls with Vertical Kotastone 30 mm x

93 No sandwitch thick every 60 cm centre to cenre including all labour material of approved quality 5.00 Sqm 8666.81

incl. full moulded round front edge fixed in wall for partition and jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and fixing stainless steel kitchen sink glossy ASIS 304 grade and 1 mm thick with overall

size 510mm x 432mm x 330mm deep having bowl size 410mm x365mm x 165mm of Nirali or

94 equivalent brand with all fittings CI or MS brackets painted white or fixing on stone base including 2.00 Nos 1275.63

cutting holes and making good the same brass valve and fisher union fitting including all necessary

95 Providing thoruting or plaster drip and moulding to R.C.C. chhajja. 16.00 Rmt 43.05

Providing 12mm wide groove throating / notch in plaster including finishing the same etc. complete

for all height.

Providing and fixing 18MM TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH

BOTH SIDE LAMINATE & PVC BEADING ON PERIPHERY and Providing and Fixing Stainless

Steel (Grade -316) accessories, sheet cutlery basket (2 Nos), Thali Basket(2 Nos), Plain Basket(2

nos), Cup Saucer Basket (2 Nos) of size 520 x 485 x 100 mm fixing on telescopic channel (GODREJ

97 OR EQUIVALENT) having hardware like handles, dead lock, magnet etc with fixing all expose 5.00 Sqm 22361.40

surface are decoartive laminate sheet and other inner surfaces are 1.0 mm thick lamiate including all

necessary fixture and fastening ( Steel handle, hinges, stopper , chains and locking arrangement etc.

complete as directed by Engineer-in-charge.

Providing and Fixing 18 mm thick Plywood SLIDING SHUTTER for Cupboard or Below platform

shutter using 18mm thick TERMITE PROOF PLY (GREENPLY OR EQUIVALENT) WITH BOTH

SIDE LAMINATE & PVC BEADING ON PERIPHERY. Exposed face should be covered with

mm thick laminate of approved quality and pattern, colour, texture the rest of the inside surfaces,

shelves ete. shall be finished with 0.80 mm thick white laminates of approved make, wooden framing

98 shall be used including alround framing of 19 mm X 12 mm. teak wood member at all borders and in 14.00 Sqm 15437.85

the centre where ever, all the sides of the shutter should be covered with teakwood battens and

provided with necessary framing, best quality SS channels for sliding, SS finished hinges, hadles,

megnet, deadlock etc. as approved and directed by Engineer-In-Charge.

Providing and fixing in position 300mm high , 150mm wide englsih letter made from 1.0mm thick

99 stainless steel sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 30.00 No 707.00

Providing and fixing in position 150mm high , Englsih letter made from 1.0mm thick stainless steel

100 sheet as directed by enginer in charge with all necessary tolls & plants etc. complete. 80.00 No 404.00

Providing and laying in foundation cement concrete 1:4:8 (1 cement : 4 coarse sand :8 graded stone

aggregate 40mm nominal size) and curing complete excluding cost of form work in :(a) Foundation

Providing and laying controlled cement concrete M-200 and curing complete including the cost of

102 form work but excluding the cost of reinforcement for reinforced concrete work in Slabs ,Landing 12.00 Cum 6475.12

,Cantilever upto Floor two level

Providing T.M.T. bar ( Thermo Mechanically treated Bars) reinforcement confirmed to IS-1786

Fe415 for R.C.C. work including bending, binding, and placing. In position comp. Up to floor two Kg

level. For Ground Floor

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and fixing mild steel door with 40 x 40 x 6 mm angle for frame and for shutter frame 30 x

30 x 3 angle. For windows frame of angle 35 x 35 x 5 & for shutter windows 25 x25 x 3 mm size

angle and 18 gauge sheet for panels & 10 mm dia bars at 10 cm c/c for grill and 40 x 6 mm flats on

edge of shutter, & 20 x 6 mm binding patti, including one coat of primer and two coats of oil painting

etc. comp. as per detail / as directed by Engineer in charge.

Providing 15mm thick cement plaster ( Mala Trowel finish) in single coat on brick/concrete walls for

interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:4 (1-

cement:4-sand) for Ground Floor

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering

upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

106 including finishing with a flating coat of neat cement slurry etc. complete. for Ground Floor 23.00 Sqm 215.32

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

107 of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 226.00 Sqm 320.70

1:1 (1-cement : 1-sand) etc. complete.

Providing 15 mm thick Water proof cement plaster for sunk in single coat on bricks/ concrete wall

for interior plastering upto floor two level finished even and smooth (ii) Cement mortar 1:3 (1-

108 cement : 3-sand) and mixing waterproofing materials of approved brand and manufacture in cement 41.00 Sqm 270.68

mortar in proportion recommended by the manufacturer for All Floors.

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed

109 of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white 13.00 Sqm 955.41

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying hand dressed polished blue Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey

111 cement slurry including rubbing and semi miror polishing with emery No. 600 etc. complete. (A) 9.00 Sqm 1018.88

25mm thick

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

112 undecorated wall surface to give an even shade including throughly brushing the surface free from 61.00 Sqm 125.73

mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of Sqm

loose powdered materials.etc complete

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

114 cement finishing, watering etc. complete. 15.00 Rmt 24.28

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by Engineer In Charge. Pipe shall be fixed on the wall

116 with the help of clamp at every two metre C/C or shall be concelled as directed including necessary 90.00 Rmt 195.67

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.[E] 50 mm.

117 Providing and fixing S.S Butterfly valve of IS aprroved brand (C) 50mm dia. 2.00 No. 808.00

Providing and laying Controlled cement concrete M200 using B.T. stone aggregate and curing etc.

118 complete including the cost of form work but excluding the cost of reinforcement. (a) Column for 7.00 Cum 9052.56

Ground floor.

Providing and laying ordinary cement concrete M200 using B.T. stone aggregate for R.C.C. coping

119 curing etc. complete including the cost of form work but excluding the cost of reinforcement. 3.00 Cum 5652.97

Providing and fixing M.S.Compund gate of required pattern to fix on wall as per given detailed

120 drawing using M.S. flats, M.S. Square bars, Cast iron decorative pattern and fixing with necessary 540.00 Kgs. 160.85

required nuts, bolts and welding works etc. comp. ( B) Ornamental

Providing and fixing M.S. grill of required pattern to wooden frame of windows etc. with M.S. flats

121 of required spacing in frames alround square or round bars with round headed bolts and nuts or by 54.00 Kgs. 106.23

screws of windows or clearstory windows ( A ) Plain grill

Painting two coats including priming coat on new steel and other meatl surfaces with enemal paint

122 brushing interior to give an even shade including cleaning the surface of all dirt, dust and other 14.00 Sqm 128.13

foreign matter.

Providing water harvesting pit 2.40 mt dia x 2.40 mt depth with excavation in any strata filling the pit

with brick bats in 0.60 mt depth, 0.30 mt with 25mm to 40mm kapchi 0.30 mt with 10mm to 20mm

123 kapchi & 2.00 mm depth with coarse sand in layer including maing the lines (PVC) for water inlet 1.00 Nos. 77607.39

etc. as directed including 250mm dia bore work with 6" PVC" pipe upto 35mt etc, comp.

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing and laying ordinary cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone

124 aggregate 20mm nominal size) and curing etc. complete including the cost of form work but 1.00 Cum 3638.79

excluding the cost of reinforcement.(a) Footing.

Providing and laying Controlled cement concrete M200 and curing etc. complete including the cost of

125 form work but excluding the cost of reinforcement for R.C.C. work in SLABS 12 cm thickness. for 1.00 Cum 6475.12

Ground Floor

Providing T.M.T. bar reinforcement for R.C.C. work including bending, binding, and placing. In

126 position comp. Up to floor two level. 90.00 Kgs. 77.29

Box cutting the road surface to proper slope and chamber for making a base for road work including

127 removing the excavated stuff and depositing on the road side slope as directed up to 50 mts. Lead. 52.00 Cum 109.08

Supplying and laying, spreading and compacting coarse clean sharp specified sand (C.B.R. not less

than 10%) below sub base course including carraige of material spreading in uniform layers manually

128 on prepared base and compacted with power roller to achieve desired density including all materials, 10.00 Cum 384.81

labours etc. complete. and spreading coarse clean sand as directed.

Providing and laying 300mm thick W.B.M. with B.T.M.C. metal 40mm to 63mm size two layer of

150mm thick including using 25% stone dust as filler including spreading watering consolidation and

129 rolling etc. complete at site of work including loading unloading and filling the boxes etc. complete. 15.00 Cum 2053.33

Providing and laying controlled cement concrete M.250 and curing complete including the cost of

130 formwork and reinforcement for reinforced concrete work in(A) Foundations, footings, Base of 19.00 Cum 4347.04

columns and Mass concrete

Compaction and finishing of cement concrete road by tremix process, providing extra labour charge

for tremix ( Vaccum dewatering service ) process on cement concrete road surface by using vaccum

131 dewatering pump floater surface vibrator including making groove 5mm width and filling with 94.00 Sqm 85.85

polyvynile polymer and rough finish to surface as per instruction including leveling etc. complete.

Providing and fixing junction board of M.S.plates and angles as per standered IRC design including

132 fixing in C.C. 1:4:8 with necessary excavation , painting, figuring and lettering on board etc. comp. 2.00 No. 5236.70

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with

all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

134 of unserviceable materials with all lead and lift.(ii) In Cement Mortar. 278.00 Cum 562.89

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including

136 stacking the materials with all lead and lift ( for any dia, of pipe) 120.00 Rmt 76.68

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats

137 architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) 244.00 No 192.09

Not exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. Sqm

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Earthwork for embankment including watering,Consolidation, breaking clods, dressing with all lead

140 and lift From Borrow area within 2.0 Km. lead 2308.30 Cum 186.65

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

141 textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 41.00 Pt. 485.81

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III Make:- Honeywell, L&T,

Crabtree, Indoasian, M.K, Anchor

Half Point Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 11.00 Pt. 242.91

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires,

in below type of pipe to be erected complete with earth continuity and necessary connection with

primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

142 PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling 20.00 Pt. 167.66

rose / H.D.Connector as directed.(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden

143 box, single mounting base frame covered with textured/metallic/white front plate modules erected on 11.00 Pt. 674.68

/ in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K,

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

145 modules erected on / in wall / ceiling with following type accessories Cat. III Make:- Honeywell, 24.00 Pts. 257.55

L&T, Crabtree, Indoasian, M.K, Anchor

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian,

M.K, Anchor

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box,

single mounting base frame covered with textured / metallic/white front plate , modules erected with

147 necessary connections as per site situation directed by Engineer In charge.(3) Two Pin/RJ-11 2.00 Ea. 160.59

Telephone Socket [A] For One Gang Cat.III

(4) TV Co-axial Socket outlet Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(5) Electronic hum Free steps EME Fan regulator Cat.III Make:- Honeywell, L&T, Crabtree,

Indoasian, M.K, Anchor 3.00 Ea. 398.95

(7) Blank Plate Single Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor 10.00 Ea. 25.25

(8) Computer RJ-45 socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(9) 16 Amp. SP one way switch Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

(10) 6/16Amp. Universal socket Cat.III Make:- Honeywell, L&T, Crabtree, Indoasian, M.K, Anchor

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes,

149 Check-nuts etc. complete of following sizes.(2) 25 mm 20.00 Mtr. 21.21

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

150 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 468.00 Mtr. 82.82

following size (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

151 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size 30.00 Mtr. 260.58

(A) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm Make- RR Kabel,

Havells, Avocab, KEI, Johnson, Polycab, ADCAB

(a) 2 wire 4 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB Mtr.

(b) 2 wire 6 sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB 30.00 Mtr. 147.46

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing

152 pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & 5.00 Mtr. 56.56

control wiring) with required size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm

(f) One wire 10.00 sq. mm 5.00 Mtr. 91.91

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked

153 copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed 60.00 Mtr. 46.46

Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab, ADCAB

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly -

Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC

insulation.(a) RG

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

155 Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following 60.00 Mtr. 20.20

size of conductors & nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

156 [C] CAT - 6 125.00 Mtr 47.47

Providing & erecting Switch board for Computer or electric apparatus consisting of following

modular type accessories mounted with PVC / Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white front plate,modules erected with necessary

157 connections as directed 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch 3 nos. 6A 5 5.00 Nos 1133.22

pin Plug For Modular Type Accessories Cat. III Make:- Honeywell, L&T, Crabtree, Indoasian,

M.K, Anchor

Decorative call bell Ting-tong box type 250 volts complete erected Ea.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %

159 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of 13.00 Ea. 373.70

ranges shown.)(A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

4 feet Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable

160 for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable 7.00 Nos. 112.11

LAMP holder (ii) 5 to 8 watts Cat-III Make;- Jaquar, Wipro, LT, Havells, Luker

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED

161 driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description 43.00 Ea. 589.84

wattage capacity between the ranges shown.)(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (iii) 16-20 watts, Surge-2

KV Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Make;- Jaquar, Wipro, LT, Havells,

Luker 4.00 Ea. 312.09

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of

3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

162 efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have 10.00 Ea. 4997.48

capacity between the ranges shown.)(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-lll

Make;- Jaquar, Wipro, LT, Havells, Luker

(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (i)20- 30W Cat-lll Make;- Jaquar, Wipro, LT, Havells, Luker

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections,

163 spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only 1.00 Ea. 6173.12

Cat III Make- Indoasian, L&T, Schneider,ABB

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour insulating tape for phase sequence of following current

164 carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, 0.80 Rn.Mtr 1961.43

erected in existing cubical panel with necessary connections.(A) Suitable for 100 Amp. Capacity

Supplying KITKAT pattern porcelain cut-out fuse with base of following current capacity erected on

165 existing block board.(v) 100 A. 500 V. 3.00 Ea. 278.76

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting

166 with operating mechanism A.C.23 duty confirming to IS for (A)32-40A Cat-lll Make- Indoasian, 1.00 Ea. 2611.86

L&T, Schneider,ABB

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having breaking

167 capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 12.00 Ea. 270.68

Make- Indoasian, L&T, Schneider,ABB

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III Make- Indoasian, L&T, Schneider,ABB

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

169 breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp. 5.00 Ea. 668.62

Cat.III Make- Indoasian, L&T, Schneider,ABB

(c)63 Amp. Cat.III Make- Indoasian, L&T, Schneider,ABB 2.00 Ea. 737.30

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

170 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (B) 40 6.00 Ea. 330.27

Amp..Cat.III Make- Indoasian, L&T, Schneider,ABB

171 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB 2.00 Ea. 52.52

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)(b) sheet steel double door (ii)6 way Make- Indoasian, L&T,

Schneider,ABB

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43)

(iv)12 way Make- Indoasian, L&T, Schneider,ABB 2.00 Ea. 1492.78

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as directed (ii) 40Amps. DP

Cat. III Make- Indoasian, L&T, Schneider,ABB

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer

174 incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. 1.00 Ea. 69.69

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

175 officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having 1.00 Ea. 4591.46

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For Electrical Installation up to 440V in

normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

176 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 Kg. 794.87

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

177 with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth 6.00 Ea. 368.65

178 For using salt and charcoal / coke as required for pipe type earthing. 6.00 Ea. 171.70

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

179 sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end 1.00 Sq.Mtr 10468.65

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following approved manufacturers

with following size.(A) locally fabricated panel board (i) with 350 mm depth

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

180 following size of cables (B) 4 core 6 Sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, 210.00 Mtr. 126.25

Polycab,ADCAB

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of

181 cables (B) 4 core 25 Sq. mm Make- RR Kabel, Havells, Avocab, KEI, Johnson, Polycab,ADCAB 20.00 Mtr. 190.89

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all

182 over the run and back filling the same and making the surface as normal ground. 180.00 Mtr. 55.55

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at

183 required depth in existing trench for laying of cable. below ground / road surface for enclosing 190.00 Mtr. 62.62

cable (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated

184 armoured cable complete with out going tails, insulating tape etc for following size of cables.(B) 2 to 20.00 Ea. 38.38

4 core 6 Sq. mm

(E) 2 to 4 core 25 Sq. mm Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size

185 evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium 80.00 Ea. 6.06

plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with

186 aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by 11.00 Nos 1948.29

Engineer in charge)) USHA, BAJAJ, CROMPTON, HAVELLS, ORIENT

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly

187 painted for fan complete with proper insulation without leakage and earthing. 11.00 Mtr. 108.07

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with

188 necessary hook of 10 mm M.S. Round Bar. 11.00 Ea. 98.98

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

190 body with inbuilt lowers & square frame.200mm with 1350RPM Cat.II USHA, BAJAJ, 4.00 Ea 1703.87

CROMPTON, HAVELLS, ORIENT

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

191 arrangement for cable termination to be erected With Suitable foundation (Included) as per details 10.00 Ea. 6874.06

given by manufacturer considering site requirement.(C) 5 Mtr. Long 70 mm Top X 130 mm bottom

dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting

192 mob & hinged doors as per requirement having locking arrangements with mounting clamp with 2.00 Ea. 515.10

nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of

box.(B) 250mm x 200mm x 100mm [deep]

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable

for 76.5mm/80mm/require size of pole top having nuts and bolts for fixing the brackets and having

spread of 0.5 mtr. Length with 110 deg.with vertical plane and suitable welded stiffener reducer and

193 nipple with check nut complete painted with one coat.of Red oxide / PU base primer and two coats of 10.00 Ea 491.87

Aluminium / PU paint. paint with following nos of arms.[A] Single Arm bracket 0.5 Mtr

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching. Programming switches & housed in fire proof

194 thermoplastic enclosure & transparent cover erected as required with necessary connection erected as 1.00 Ea. 3168.37

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction

195 Cat III (D) 4 pole 440V 40 Amp. 1.00 Ea 2782.55

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED

display, 0 to 750 AC Volts range erected on existing panel board with all connection, wiring etc

196 .with manufacturers calibration certificate. 1.00 Ea 1275.63

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC

197 erected on existing panel board with all connection, wiring etc .with manufacturers calibration 1.00 Ea 1558.43

certificate.

198 existing panel board with necessary connections. 2.00 Ea 317.14

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden

erected in existing CRCA box duly secured with insulating materials connected to the meter

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete

erected with necessary connections.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for

three phase submersible motor having [A] For 1.5 HP 3 phase open well horizontal mono block pump

set suitable for 190 LPM @ 20 mtr head suitable for 40 mm dia delivery pipe Cat.II Make:- PRIMA,

AMRUT, DUKE, LUBI. CROMPTON

Supplying and erecting Direct on line starter with 30 Amp. (resistive @ 230v) power relay and with

to 5/ 4 to 10 / 8 to 20 amp. Range C.T. Operated electronic overload relay in engineering grade

plastic enclosure for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high voltage protection (above

480 v) and under voltage protection (below 330 v) current sensing single phasing protection. Reverse

202 phasing protection, inverse current characteristic overload protection with indication for On, OL, 2.00 Ea. 2168.47

HV,LV SPP in a single unit with feather touch start / stop push button, high temperature with

standing Bakelite terminals complete erected on P.W. Block with necessary connection. [Cat.II]

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper

cable approved make of following Size. (A) 3 Core x 1.5 Sq. mm. Make- RR Kabel, Havells,

203 Avocab, KEI, Johnson, Polycab,ADCAB 30.00 Mtr. 65.65

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using insulating

material, water proofing material, & making the joint complete. (A) Up to 10Sq. mm

Lowering of submersible motor pump set at the depth of following ,complete with required. Nos. and

size of casing pipes erected by means of proper chain pulley block & pipe wrenches after checking of

threads of each pipe with coupling to take the load of the pump set and pipe assembly filled up with

205 water (D)For Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP 2.00 Per Job 856.48

No Rate In

Description of Item (with brief specification and reference to book of specifications) Quantity Unit Amount

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per

instruction of Engineer in charge on site complete with wiring connection with existing wires , with

206 copper conductor from pump to upper and lower tank. 1.00 Ea. 2355.32

Total Tender amount

Rupees One Crore Fourteen Lakh Forty Five Thousand Seventy Eight And Paise Ninty Four Only

I/am we/are willing to carry out the work at _____% above /below _____________ percent (should be written in figures and words) of the estimated rates mentioned above. Amount of

my/our tender works out as under.

* Estimated amount put to tender

Deduct :_____ % Below Rs.________________ Add :_____ % Above Rs.________________

Net Rs. ______________________ Total Rs. ______________________

In words ___________________________ In words __________________________

1. The Contractor Shall Exhibit a board with deatiled specification and details of work as directed by the Engineer-In-Charge for which no Extra Payment shall be made.

2. The labour crss will be deducted as per prevaling Rules i.e 1% of the work done.

3. GST and Income tax TDS will be deducted at a Source while making Payments of bills.

4. In all RCC items in Rate Analysis Standard cement Consuption has been taken as per Govt.G.R: PRC -10/2017 cement consumption/16/c, Date: 11/05/2017 as stated i. S.O.R

therefore in RCC Items where there is a changed as per actual mix design the cost of diffrence of cement consumption have been deduvted from the rate of orignal item at the rate of

input rate mentioned in all the tender.

5.Credit Amount Rs 945782.00 for Credit for Dismantled materials will be deducted from First Running account bill.

Above all items of " Schedule-B" with iem Description,Unit,Rate & Amount Have verified by me and found Order.

Deputy Executive Engineer Executive Engineer

R & B (Pan) Sub Division R & B (Pan) Division

Palanpur Palanpur