REPAIRS REPLACEMENT OF FLOOR, ROOF PLASTER, SANITARY FITTINGS, JOINERY, TILING, ROAD, PATH, HARD STANDING, COMPOUND WALL, BARBED WIRE FENCING, REPAIR CLEANING OF SEWAGE LINE DRAIN ETC AT ICGS VIZHINJAM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

Material and labour for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over cement mortar screed bed of 15mm thick in CM 1:4 complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 as in vertical surfaces such as skirting/dado/riser to steps, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not excceding 0.11 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not excceding 0.11 Sqm, as in vertical surfaces such as skirting/dado/riser to steps etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surface such as dado, size of tile 300x200x7mm set and jointed in neat cement slurry fixed over backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and Labour for Granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laid over and including 15mm thick cement mortar 1 :4 complete all as specified and directed.

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, remove dust, debries/rubbish etc. complete all as specified and as directed.

Material and Labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of concrete work in CM 1:4, using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Supply only integral water proofing compound all as specified and as directed.

Material and Labour for 5mm thick rendering on fair faces of ceiling surfaces in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and as directed.

Material and Labour for preparing of new surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of alkali resistant primer on plastered wall surface complete all as specified and as directed.

Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof anti fungal exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Destruction of growth of weed plants with roots from on the roof of buildings and on the wall (any height) with 2.40 oil mixed weedicide or mixed with veedol chemical solution and sprayed on and around roots and at places of possible growth of weeds and making good damaged surfaces by plastering, pointing etc complete all as specified and as directed by eng-in-charge.

Material and Labour for writing letters or figure(block, roman, italic or indian) per CM of height but not exc 30cm high complete all as specified and directed.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces, complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down with wire brushing or scrapping down smoke soot, moulds, mass and effloroscent salts, removing of nails, making good holes, cracks etc. and applying one coat of white wash complete all as specified and as directed.

Material and Labour for preparation of old decorated surfaces of ceiling/soffit of chajja and canopy (plastered or unplastered) and cornices, by brooming down with wire brushing or scrapping down smoke soot, moulds, mass and effloroscent salts, removing of nails, making good holes, cracks etc. and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated steel & iron surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old decorated steel & iron surfaces of any description not exceeding 10 cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and Fix in repair vitreous china wash down water closet Pedastal pattern white (excluding flushing cistren ) including trap set, seat cover and conection to trap, flushing pipe, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.

Supply and fixing in repairs Vitrious China squatting pan ' Orissa' pattern of size 580 mm x 440 mm white with integral foot rest excluding flushing cistern and flush pipe including P or S trap making good the floor to match with existing floor complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 550X400mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed.

Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, and wastes, including bedding in cement mortar to drawf wal or including fixing cantiliver brackets and connecting union ot pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm all as specified and as directed.

Supply and Fix in repair PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and Fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel chromium hinging device etc complete all as specified and directed.

Supply and fix in repair 15mm dia PVC connection with PTMT nuts and PVC washers 45 cm long and connecting of water pipes all as specified and directed.

Supply and Fix in repair 40 mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fixing in repairs 5.5 mm thick looking mirror PVC cabinet of size 450 x 350mm x 10mm and fixed to wooden plugs with CP Screws and cup washers all as specified and as directed. Make: Prayag, Nilkamal

Supply and fixing in repairs 6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing and fixed to wooden plugs with CP Screws and cup washers all as specified and as directed.

Supply and fixing in repairs Towel rails tubular brass chromium plated 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fixing 32 mm bore low density polyethylene (LDPE) pipe of pressure rating 4 Kg/Sqcm fixed to wall/ceiling or laid in floors all as specified and as directed.

Making connection of PP-R distribution branch with PP-R main of 16 to 40mm outer dia of pipe by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed.

Removal of blockages in PP-R pipe 16mm to 40mm outer dia including cutting out concrete/tile, repair/replace the pipe, making good the repaired area to match existing surface complete all as specified and as directed.

Supply & Fixing in repairs Bib taps, 15mm bore, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and fixing in repairs pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down, long shank, and fly nut, high pressure, screwed for iron pipe of 15 mm bore all as specified and as directed.

Supply and Fixing in repairs stop valves/angle cock, 15mm bore, fancy type, with long shank & cut concealed type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Supply and fix in repair chromium PVC grating with 150mm dia (min weight 100gms) with or with out waste hole complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each refixing in the same opening after petty repairs etc complete all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each and refixing in the same opening after petty repairs etc complete all as specified and as directed.

Repairs to shutter of any description not exceeding 1 sqm each resecuring or easing and adjusting with out taking down complete all as specified and as directed.

Repairs to shutter of any description exceeding 1 sqm but not exceeding 2 sqm each resecuring or easing and adjusting with out taking down complete all as specified and as directed.

Taking down shutter of any description not exceeding 1 sqm each all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each all as specified and as directed.

Taking down chokhats or frame not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame ) complete all as specified and directed

Taking down chokhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Material and Labour for 35mm thick 2nd class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and directed.

Material and Labour for 30mm thick 2nd class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and with sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and directed.

Supply and fix 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

Supply and Fix PVC door frame size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with prelaminated sheet reinforced with MS square tube supplying & fixing in opening as per specification complete all as specified and directed.

Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification and drawing given in SSR Part-II complete all as specified and as directed.

Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints, fixed to wall and making good to wall all as specified and directed.

Material and Labour for treating small article such as stops, covers, gully, gratings and hold fast ends & post backs of chowkat etc tarred area n exc 0.10 Sqm each all as specified and directed.

Material and Labour for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, making good dismantled portion and other similar works complete all as specified and as directed.

Supply and fix mild steel bands , straps, hold fast of size 25 x 3 mm thick and similar work conforming to Fe 410 or Fe 310 all as specified and directed.

Preparing surfaces of wood and wood based material treating ends of posts back of chowkats area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each treated with a coat of tar or coal tar black paint all as specified and as directed.

Material and Labour applying two coats synthetic enamel paint over one coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc., complete all as specified and directed.

Supply and fix 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

Supply and Fix stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repairs 100mm long hinges type-B 21 in aluminium side hung type window complete all as specified and as directed.

Material and Labour for gap filling between wall and aluminium windows area not exc 2 sqm each with silicon glue not exceeding 5mm gap complete all as specified and as directed.

Taking down carefully aluminum/Glass doors area exceeding 1 Square Metre and not exceeding 2 Square Metre and re-fixing in same opening including necessary repairing/cleaning/greasing etc and make the same fully functional all as specified and directed.

Material and Labour for minor repair to aluminum/glass doors, windows, partitions and making good the defects of Handles, hinges, rubber beadings, clips etc complete all as specified and directed.

Hacking out old broken glass any thickness, size and quality from wooden frames or stone, concrete of brick surrounds, glazed with putty or beads all as directed.

Hacking out old broken glass any thickness, size and quality from metal frames including punching or drilling out old glazing pins all as directed.

Supply and fixing 4 mm thick figured galss pin headed type and glazing with oil putty complete all as specified and as directed.

Supply and Fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average widht of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolt of length 100mm complete all specified and as directed.

Supply and fixing aluminium anodised barrel tower bolt of length 150mm complete all specified and as directed.

Supply and fixing aluminium anodised barrel tower bolt of length 200mm complete all specified and as directed.

Supply and fix aluminium handles fabricated type anodised of size 100mm complete all as specified and as directed.

Supply and fix aluminium handles fabricated type anodised of size 125mm complete all as specified and as directed.

Supply and fix aluminium handles fabricated type anodised of size 150mm complete all as specified and as directed.

Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.

Supply and fix 75mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.

Supply and Fix in repairs Aluminium anodised Hasp & Staple fixed with screws 125 mm size including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

Supply and fixing in repairs aluminium anodised barrel tower bolt of length 100mm complete all specified and as directed.

Supply and fixing in repairs aluminium anodised barrel tower bolt of length 200mm complete all specified and as directed.

Supply and fixing in repairs aluminium anodised barrel tower bolt of length 100mm complete all specified and as directed.

Supply and fix in repairs aluminium handles fabricated type anodised of size 100mm complete all as specified and as directed.

Supply and fix in repairs aluminium handles fabricated type anodised of size 150mm complete all as specified and as directed.

Supply and fix in repairs 75mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.

Supply and fixing in repairs Aluminium alloy anodized, sliding door bolt 300 mm long with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing in repairs floor door stopper aluminium alloy body and tongue, anodised with hard drawn steel spring, 150 mm over all length of cover plate complete all as specified and as directed.

Supply and fix in repairs 300mm long Mild steel ordinay rat tail rod pattern springs including roller and roller plate complete and fixed complete all as specified and directed.

Supply and fixing in repairs harrison rail, mild steel, chromium plated nwith fixing bracket, stops, rollers etc complete all as specified and as directed.

Supply and fix in repairs door closer hydraulically regulated aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST

Demolition of concrete in ground floors, pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth including necessary form work all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base to floor finished even and smooth including necessary form work all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block, any shape and size of 60 mm thickness M-35 grade conforming to IS 15658-2006 with grey cement and pigment with glossy finish laid over crushed stone chipping not exceeding 6.3mm size as cushioning to paver blocks including taking out old paver blocks complete all as specified and directed. NOTE: Crushed stone chipping shall be measured and paid separately.

Removal of existing paver block and refixing the same interlocking paver block after levelling sunken portions with required thickness of sand/stone chipping cushioning and levelling the top surface to match with existing all as specified and as directed. NOTE: Crushed stone chipping shall be measured and paid separately.

Material and labour for machine pressed precast concrete interlocking paver block, any shape and size of 60 mm thickness M-35 grade conforming to IS 15658-2006 with grey cement and pigment with glossy finish laid over crushed stone chipping not exceeding 6.3mm size as cushioning to paver blocks complete all as specified and directed. NOTE: Crushed stone chipping shall be measured and paid separately.

Material and labour for 50mm thick compacted thickness of crushed stone chipping not exceeding 6.3mm size as cushioning to paver blocks complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in kerbs or mud stops, rounded or chamfered on edges, as directed including use of form work as necessary all as specified and as directed.

Demolition of brick or stone masonry built in cement mortar including all quoins,arches, pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:4 complete all as per specified and as directed.

Material and Labour for rendering 15 mm thick in CM (1:4) on brick/concrete surface of walls in two layers mixed with water proofing compound @3% by weight of cement in top 5mm thick layer, finished fair and even surface without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

Supply and Fixing Mild steel work such as angle or tee section fixing independently without connecting plates, cut to ordinary length ie, within 20mm of the length indicated conforming to Grade E-250, Fe 410 W quality A for fencing post/Y type angle post complete all as specified and as directed.

Supply and fix structural steel work in tubular trusses including special shaped washer of 6mm thick MS sheeting etc complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 all as specified and as directed.

Supply and fix in repairs Galvanized, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including secruing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Supply and fix framed work such as gate, grills , grating ,etc with ends of bars shouldered and or revated for forged in to spike ,framed uard bars barred iron doors, ladders, balusters,walk ways raling framed work for water tanks similar work including pintle hinges, stops, hand made sliding bolts etc confirming to Fe -290 Gde E-165 complete all as specified and directed.

Supply and fixing pre-colour coated high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.

Supply and fix in repairs 3mm thick polycarbonate sheet crystal pattern with sealed end and fixed with all accessories as in roof/cladding as per manufacturers instructions complete all as specified and as directed. Make: Lexan/Tuflite/Gallina/Sunlite

Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in roof/landing/chajja/shelves and similar suspended work complete all as specified and directed.

Use and waste for form work to sides and soffits of beams, lintels etc, shelves, over hang etc fair finished flat surfaces of concrete all as specified and as directed.

Material and labour for reinforced cement concrete 1:1.5:3 type A1 using 20 mm graded stone aggregate as in shelves/slabs supported on wall, beams and columns and similar work complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in manhole/septic tank cover slabs and similar work complete all as specified and directed.

Material and Labour for precast reinforced cement concrete 1:2:4 type B1 with using 20 mm graded stone aggregate as in man hole/septic tank cover slab set in CM 1:4 including necessary form work all as specified and as directed. NOTE: Reinforcement shall be measured and paid separately.

Material and Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

Material and Labour for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

Cleaning of existing Drainage /culverts ect upto 1.5M depth including removing cover slabs, soils, spoils, vegitation, salt ect and refixing cover slabs including making good in CM 1:6 and removing sludge/debris and other waste material out side MD land complete all as specified and directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris.

Cleaning of man holes/septic tanks/sockage pits by bailing out water, removing night soil & sediments& disposing off out side MD land, cleaning the external surfaces with fresh water & fixing the manhole covers including disposal of sludges/water out side MD land complete all as specified and as directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris.

Cleaning of sewage lines up to 150mm dia pipe by rodding from one man hole to next man hole, washing thoroughly with fresh water and removing all sludges from the sewage lines including removing existing man hole covers and refixing properly after cleaning and disposal of sludges out side MD land complete all as specified and as directed. Note: The sludge/debris and other waste material obtained after cleaning the drains shall remove from defence land duly followed the instructions laid down by the local govt bodies and the quoted rate shall be deemed to be inclusive of the removal of sludge/debris.

Cleaning the blockages in floor trap, Nahani trap, Gully trap, WC 'P' trap or 'S' trap, and refixing the same after cleaning the pipes making good damaged cement joints, dia of pipes n.exc 150 MM complete all as specified.

Demolition and breaking up drain pipe salt glazed ware or AC/PVC or reinforced concrete and set in cement mortar up to 100mm dia complete all as specified and directed.

Demolition and breaking up drain pipe salt glazed ware or AC/PVC or reinforced concrete and set in cement mortar exc 100mm and not exc 150mm dia complete all as specified and directed.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.

Supply and fix PVC (SWR) bends 110mm with access door complete all as specified and as directed.

Supply and fix PVC (SWR) bends 110mm without access door complete all as specified and as directed.

Supply and Fix PVC (SWR) vent cowl 110mm bore without access door complete all as specified and as directed.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 75mm dia fixed to wall complete all as specified and as directed.

Supply and fix PVC (SWR) bends 75mm with access door complete all as specified and as directed.

Supply and fix PVC (SWR) bends 75mm without access door complete all as specified and as directed.

Supplying and laying 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying under floor complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 9420.00 NOTE: Bidder shall insert credit amount of Rs. 9420.00 as rate in Green field under Col-5.

L A Constructions