Construction Work for Laibrary Building at Charup Village. Ta Saraswati, Dist. Patan

NAME OF WORK :-Construction Work for Laibrary Building at Charup Village.Ta.Saraswati, Dist Patan

BILL OF QUANTITY

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

1 21.00 Excavation for foundation up to 1.5 M Depth 128.79 Rupees One Hundred Cu.Mt

including sorting out and stacking of useful Twenty Eight and Paise

materials and disposing of the excavated stuff up Seventy Nine Only

to 50 meter lead (A) Loose or soft soil

2 36.00 Filling available excavated earth (excluding rock) 137.47 Rupees One Hundred Cu.Mt

in trenches, plinth, sides of foundations etc. in Thirty Seven and Paise

layers not exceeding 20 cm. in depth Forty Seven Only

consolidation each deposited layer by ramming

3 26.00 Filling in foundation and plinth with murrum or 273.86 Rupees Two Hundred Cu.Mt

selected brout for out side soil in layers of 20 cm. Seventy Three and Paise

thickness including watering, ramming and Eighty Six Only

consolidating etc. Complete.

4 4.00 Filling in plinth with sand under floors including 429.24 Rupees Four Hundred Cu.Mt

watering ramming, consolidating and dressing Twenty Nine and Paise

etc. complete Twenty Four Only

5 8.00 Providing and laying cement concrete 1:4:8 (1- 2749.06 Rupees Two Thousand Cu.Mt

Cement : 4- coarse sand : 8- Crushed stone Seven Hundred Forty

aggregates 40 mmnominal size) and curing Nine and Paise Five Only

complete excluding cost of formwork in (A)

Foundation and Plinth

6 4.00 Providing and laying Ordinary cement concrete 3285.82 Rupees Three Thousand Cu.Mt

1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Two Hundred Eighty

Stone aggregate 20mm nominal Size) and curing Five and Paise Eighty

complete including cost of formwork and Two Only

excluding cost reinforcement for reinforced

concrete work in (A) Foundations, footings, Base

or columns and Mass concrete

7 5.00 Providing and laying Ordinary cement concrete 6251.40 Rupees Six Thousand Cu.Mt

1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Two Hundred Fifty One

Stone aggregate 20mm nominal Size) and curing and Paise Forty Only

complete including cost of formwork and

excluding cost of reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and

struts upto floor two level.

8 4.00 Providing and laying Ordinary cement concrete 5601.34 Rupees Five Thousand Cu.Mt

1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Six Hundred One and

Stone aggregate 20mm nominal Size)and curing Paise Thirty Four Only

complete including cost of formwork and

excluding reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level.

9 5.00 Brick work using common burnt clay building 3708.98 Rupees Three Thousand Cu.Mt

brick having crushing strength not less than 35 Seven Hundred Eight and

kg/sq. cm. in foundation and plinth in cement Paise Ninety Eight Only

mortar 1:6 (1 Cement : 6 fine sand) (b)

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

10 19.00 Brick work using common burnt clay building 4004.12 Rupees Four Thousand Cu.Mt

bricks having crushing strength not less than 35 Four and Paise Twelve

kg./Sq.Cm. in foundation and plinth in Cement Only

Mortar 1:6 (1- Cement : 6 -fine sand) Extra for

brick work in superstructure above plinth level

upto floor two level (B) Conventional(upto

11 3.00 Providing and laying cement concrete 1:2:4 (1 4762.07 Rupees Four Thousand Cu.Mt

Cement : 2 coarse sand : 4 Crushed stone Seven Hundred Sixty

aggregates 20 mm nomial size) and curing Two and Paise Seven

complete excluding cost of form work for Only

following grades, machined batched & machine

vibrated design mix concrete using graded hard

(black trap) stone aggregate of 20mm nominal

size obtained from quarry including mechanical

mixing, mechanical vibrating, compaction,

finishing, curing etc Completed as approved by

the Architect and Engineer-in-charge, (A) Wall

caps / coppings.

12 1.32 Providing and laying cement concrete work 6279.90 Rupees Six Thousand Cu.Mt

1:1.5:3 (1- Cement : 1.5- Coarse sand : 3- graded Two Hundred Seventy

stone aggregates 20 mm nominal size) and Nine and Paise Ninety

curing complete including cost of formwork and Only

excluding reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level.

13 3.00 Providing and laying Ordinary cement concrete 7109.35 Rupees Seven Thousand Cu.Mt

1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded One Hundred Nine and

Stone aggregate 20mm nominal Size)and curing Paise Thirty Five Only

complete including cost of formwork and

excluding reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level.

14 7.00 Providing and laying Ordinary cement concrete 6182.86 Rupees Six Thousand Cu.Mt

1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded One Hundred Eighty Two

Stone aggregate 20mm nominal Size)and curing and Paise Eighty Six Only

complete including cost of formwork and

excluding reinforcement for reinforced concrete

work in (B) Slabs, landing, shelves, Balconis

Lintels, Beams, Girders and Cantilever upto

floor two level.

15 1648.00 Providing T.M.T. Bar FE 500/500D 76.21 Rupees Seventy Six and Kg

Reinforcement for R.C.C.work including bending, Paise Twenty One Only

and placing in position complete upto floor two

16 360.00 Providing TMT Bar FE 500D reinforcement for 77.29 Rupees Seventy Seven Kg

R.C.C. work including bending, binding and and Paise Twenty Nine

placing in position complete upto floor two level Only

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

17 0.00 Providing and fixing M.S. grills of required 176.01 Rupees One Hundred Kg

pattern to wall frame of Compound Wall etc. with Seventy Six and One

M.S. polished square bar at required spacing and Paisa Only

frame of As Per design flat alround with

necessary hold fast including applying priming

coat and two coats of oil painting etc. complete

as directed by engineer in charge.

18 8.00 Providing and fixing M.S. window with Ms Grill 4023.84 Rupees Four Thousand Sq.Mt

prepared with ms equal angle for frame and Twenty Three and Paise

shuter with 18 BSG. Sheet Including Fixture and Eighty Four Only

fastening Including Red lead paont with two

coat oil paint etc. Including fixing in position .(As

19 5.00 Providing and fixing single shutter one side hung 5546.92 Rupees Five Thousand Sq.Mt

shutters using factory fabricated std. Extruded Five Hundred Forty Six

aluminium colour anodized hollow section and Paise Ninety Two

{Section 63.50 x 38 mm x 2.50 mm thick } for Only

door frame, hollow portion of door frame shall

be filled with non teakwood wood and 35 mm

thick Factory Pressed flush door of natural wood

grain shade, like 'NOVAPAN 'or equivalent, as

approved by architect office with 2 x 3 Cm

Teakwood moulding strip on both side with

mm. th. transperant glass fixed ventilation on

top, Stainless steel hinges, Stainless steel ASIS

20 52.00 Providing 10mm thick cement plaster in single 141.92 Rupees One Hundred Sq.Mt

coat on brick/concrete wall for interior Forty One and Paise

polastering up to floor two level and finished Ninety Two Only

even and smooth with (II) cement mortar 1:3 (1

cement : 3 sand) curing etc. Completed as

approved by the Architect and Engineer-in-

charge, For all floor

21 97.00 Providing 15mm thick cement plaster in single 168.87 Rupees One Hundred Sq.Mt

coat on brick/concrete wall for interior Sixty Eight and Paise

polastering up to floor two level and finished Eighty Seven Only

even and smooth with (II) cement mortar 1:4 (1

cement : 4 sand) curing etc. Completed as

approved by the Architect and Engineer-in-

22 9.00 Providing 15mm thick cement plaster in single 188.97 Rupees One Hundred Sq.Mt

coat on brick/concrete wall for interior Eighty Eight and Paise

polastering up to floor two level and finished Ninety Seven Only

even and smooth with (II) cement mortar 1:3(1

cement : 3 sand) curing etc. Completed as

approved by the Architect and Engineer-in-

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

23 153.00 20 mm. Thick sand faced cement plaster 330.72 Rupees Three Hundred Sq.Mt

{GUTKA} on walls upto All height above ground Thirty and Paise Seventy

level consisting of 12 mm. Thick backing coat of Two Only

c.m. 1:3 (1 cement : 3 sand) and 8 mm. Thick

finishing coat of c.m. 1:1 (1 cement : 1 sand) etc.

Completed as approved by the Architect and

Engineer-in-charge,

24 32.00 Providing and laying vitrified tiles 600 x 600 1546.85 Rupees One Thousand Sq.Mt

Johnson or equivalent as approved by Architect Five Hundred Forty Six

as per design in floor with residue and skirting of and Paise Eighty Five

desired colors and size of first quality over a Only

minimum 20 mm. thick cement mortar 1:3

bedding on 40 mm wired finish screed and laid

to proper slope and level. Finishing to be done

with flush pointing in white cement and

matching pigment including curing and cleaning

with mild oxalic acid etc. complete as directed by

Architects and Engineer-in-charge. Rate shall be

inclusive of protection of flooring until the

handling of the project by covering the joints

with abrotapes, platic sheet and plaster of paris

Matt/ Satin Vitrified Tile

25 146.00 Distempering (Two coats) with oil bound 160.65 Rupees One Hundred Sq.Mt

washable distemper of approved brand and Sixty and Paise Sixty Five

manufacture and of required shade on wall / Only

ceiling surface to give an even shade over and

including a primer coat with with alkali

resistance primer of approved brand and after

thoroughly brushing the surfaceto give an even

shade after thoroughly brushing the surface free

from mortar droppings and other foreign matter

and also including preparing the surface even

and smooth for Applying two coats of Birla or

Asian acrylic lappy (putty) and two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.Completed as approved by

the Architect and Engineer-in-charge,

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

26 164.00 Wall painting two coats with weather proof 88.39 Rupees Eighty Eight and Sq.Mt

acralic emulsion APEX paint of approved brand Paise Thirty Nine Only

& manufacture and of required shade on exterior

wall surface to give an even shade over and

including a primery coat with alkaly resistance

primer of approved brand after throughly

brushing surface to remove all dirt and remains

of loose powdered materials etc comp. for all

height as approved by the Architect and

Engineer-in-charge,

27 80.00 Providing laying and jointing in true line and 195.67 Rupees One Hundred nos

level following dia. U.P.V.C. Pipe (SCH -40) line Ninety Five and Paise

including fittings make or equivalent as Sixty Seven Only

approved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

28 12.00 Applying two coats of putty & two coats of 40.59 Rupees Forty and Paise Sq.Mt

primer of approved brand and manufacture on Fifty Nine Only

new wall surface to give an even shade including

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.

29 2.00 Providing and fixing machine cut, free edges, pre 3388.55 Rupees Three Thousand Sq.Mt

mirror 18 mm Avg. thick Granite Slabe One Side Three Hundred Eighty

polished for vertical wall/Doors/Windows Eight and Paise Fifty Five

Sill,Jams for cladding as per design including Only

full moulded round inside edge and laid on

mm thick cement mortar 1:3 ( 1 cement:

coarse sand) jointed with grey cement slurry

including rubbing and polishing finishing etc.

30 2.00 P & L 24" x 24" vitrified 8 mm thick tile flooring 1546.85 Rupees One Thousand Sq.Mt

over 20 mm (average) base of cement mortar 1:6 Five Hundred Forty Six

( 1 cement: 6 coarse sand) on new surface or and Paise Eighty Five

fixing on existing flooring by adhesive material Only

including dismentaling of existing flooring and

jointed with color cement slurry including

finised with flush pointing & cleaning the surface

etc. complete for light shade

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

31 2.00 Providing and laying water proofing treatment 1182.71 Rupees One Thousand Sq.Mt

with china mosaic tiles flooring over avg 50 mm One Hundred Eighty Two

C.C. 1:2:4 bedding for maintaining slope for plain and Paise Seventy One

and curve surface & 12 mm to 20 mm of broken Only

piece not more than 2.5CM of ceramic / glazed

tiles ( one for more colour as directed ) to be laid

over cement mortar bedding of C M 1:3 (1

cement : 3 sand ) contain water proofing

materials per bag of cement useas specified by

manufactured and slops to be tempered to bring

mortar up to surface with using white cement

and colour pigment including rounding of

junctions and extending them up to 15 cm along

the wall and curing with bends any patens or

design as per drawing and cleaning by using

oxalic acid etc. complete.

32 3.00 Providing and fixing Door with Anodized 4763.16 Rupees Four Thousand Sq.Mt

aluminium Section Frame Equivalent to jindal Seven Hundred Sixty

door section 19552 Weight is not less than 1.1 Three and Paise Sixteen

Kg./Mt. With Woodan Insert For Dubble Gripe of Only

door Hinge Frame {Section 38mm x 63.50 mm }

Single Shutter Door 38 mm thick shutter flushed

door,Solid Core Finished With 1 mm th. Laminat

on both Side with 30 cm long Stainless Steel pipe

handle on both side SS ASIS 304 Grade, SS

Stopper 20 CM,SS Aldrop 30CM both side, SS

Hinges 3No`s in each shutter & fixtures &

fastenings as directed by Engineer in Charge, etc.

33 8.00 Providing and laying white glazed tiles 6mm 1127.48 Rupees One Thousand Sq.Mt

thick in skrting risers of steps and dedo on One Hundred Twenty

10mm thick cement plaster 1:3 (1-cement : 3- Seven and Paise Forty

coarse sand) and jointed with white cement Eight Only

34 1.00 Pro. & Fix. wash down water closet (European 1356.81 Rupees One Thousand Nos

W. C. pan) with integral "P" or "S" trap and PVC Three Hundred Fifty Six

fushing cistern with fittings etc comp incl plastic and Paise Eighty One

sheet cover including jointing trap with pipe in Only

cm 1:1 and connecting cistern with closet & Jet

spray heavy duty with S.S. Braided hose 60 cm

long & 2 No. 15 mm dia Stop cock (a ) Vitreous

china in white or color

35 3.00 Providing and fixing screw down bib taps of 186.83 Rupees One Hundred Nos

following size.(B) Brass chromium plated Eighty Six and Paise

screws down Bib Tap. (i) 15mm dia. Eighty Three Only

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

36 3.00 Providing and fixing FRP frame size 125x65 mm 2019.98 Rupees Two Thousand Sq.Mt

and 35mm thick FRP shutter with wood grain Nineteen and Paise

raised panneled design finish shutter having Ninety Eight Only

extra reinforcement on sides & edges in Gel coat

finish. The core of the shutter & frame is to be

filed up with injected polyurethene foam done in

situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The

whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges

with fastener sleeve & alluminium fixtures &

37 1.00 Providing and fixing urinal of approved quality 1280.69 Rupees One Thousand Nos

connecting the urinal with waste pipe, trap & Two Hundred Eighty and

15 mm dia Stop cock etc. complete. (A) White Paise Sixty Nine Only

earthen ware flat back or corner type size

38 20.00 Providing laying and jointing in true line and 72.65 Rupees Seventy Two and R.Mt

level following dia. U.P.V.C. Pipe (SCH -40) line Paise Sixty Five Only

including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

39 30.00 Providing laying and jointing in true line and 91.84 Rupees Ninety One and R.mt

level following dia. U.P.V.C. Pipe (SCH -40) line Paise Eighty Four Only

including fittings make or equivalent as

approved by Engineer In charge. Pipe shall be

fixed on the wall with the help of clamp at every

two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

40 1.00 Providing and fixing S.W. gully trap with grating 1292.19 Rupees One Thousand Nos

brick masonry chamber and water tight C.I. Two Hundred Ninety

cover with frame of 300mm x 300mm size Two and Paise Nineteen

(inside) with standard weight.(i) Square mouth Only

traps. (A) 100mm x 100mm size P type.

41 1000.00 Providing erecting and fixing double coated ISI 3.95 Rupees Three and Paise Liter

water tank of required capacity each with all Ninety Five Only

necessary fittings and connection etc. complete

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

42 1.00 Providing and fixing washbasin with single hole 1657.09 Rupees One Thousand Nos

for pillar tap with C.I. or M.S. brackets painted Six Hundred Fifty Seven

white including sutting holes and making good and Paise Nine Only

the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour

43 1.00 NOTICE BOARD : The PIN UP Board is made up 3030.00 Rupees Three Thousand Nos

of soft but tough pin-up sheet 12 mm thick Thirty Only

covered with velvet cloth and supported on the

back with galvanized sheet of 0.6mm, on which

the pin-up sheet is affixed under high pressure

to prevent moisture penetration and to

ensure reasonable flatness. The entire board

shall be framed within a specially extruded

aluminum channel with nylon corner edges. The

board shall be fixed with square plates with +

slots for mounting in horizontal or vertical

directions as desired. Large size boards shall be

affixed on the wall with special Z shaped

brackets screwed into the wall

to hold the frame on all directions and all sides.

44 2.00 GLASS DOOR ALMIRAH WITH ADJUSTABLE 11615.00 Rupees Eleven Thousand Nos

SHELVES AND TOUGHENED GLASS DOOR. Six Hundred Fifteen Only

SIZE: Height 1970mms, Width 915mms, Depth

1. Supply of Steel Almirah big size manufactured

from CRCA sheet conforming to IS: 513-1994

grade ‘D’ material. The CRCA sheet of uniform

thickness of 22 gauge for the body and shelves,

20 gauge for doors frame duly cut and bend

with the help CNC machines The doors should be

provided with 4mm thick toughened glass

having high quality rubber beading on all four

sides and further holding with sheet metal strips.

Welding on the front frame of the doors should

not be acceptable. The front twin door frame

should be in single sheet with built in up and

down cut outs of size 790mm x 290 mm for

fitment of toughened glass. The doors are

provided with 3 way bolting system. The top and

bottom end of the locking rod should be

horizontally hook type and to be inserted into

the horizontal slot and 3-way lock should be

operated by single key.

2. The almirah shall be equipped with four

adjustable shelves manufactured from 22 gauge

CRCA sheet, thereby making five compartments

in the Almirah. The steel shelf shall be capable of

carrying a uniformly distributed load of

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

45 2.00 Book Almirah : Supply of Book Almirah with 5 11615.00 Rupees Eleven Thousand Nos

compartments made of 0.8 mm thick CR steel Six Hundred Fifteen Only

sheet, powder coated with 50 microns film

thickness and Door frame width should be

40mm. The item should be equipped with a

heavy duty lock and the two doors should have

5mm glass with aluminum handles and

aluminum profile doors. Overall size should be

914 (W) x 480(D) x 1980 (H) mm . Materials.

Heavy duty Bush should be provided and each

compartment Height should be of minimum

330mm. The body color should be Off White and

Door Frame to be of Dark Grey.

46 3.00 Book Shelf : Supply of 5 compartment bookshelf 18685.00 Rupees Eighteen Nos

having 1820 (H) x 900 (W) x 355 (H) mm, made Thousand Six Hundred

of 18mm thick Prelaminated Particle Board Eighty Five Only

conforming to IS 12823 with decorative

lamination on both sides with 3mm thick PVC

edge banding. Each compartments should have a

minimum height of 300mm and should be

equipped with Heavy-duty bushes. It should have

a holding capacity of 35 kgs for each

compartment. The color should be Natural Teak

Note: Color of the Lamination should be finalized

with the engineer in charge.

47 1.00 Reception COMPUTER TABLE Overall Size: 900 6565.00 Rupees Six Thousand nos

mm W x 600 mm D x 750 Ht Table top should be Five Hundred Sixty Five

made of pre-laminated particle board 900mm x Only

600mm, 17mm thick. All the exposed edges are

protected with PVC lipping of 1.5mm thickness

affixed with hot melt glue. Full length keyboard

tray should be made of 17 mm thick pre-

laminated board. Keyboard trey of size 730mm

Lx 300mm D should move on telescopic channel.

The rear of the keyboard platform is provided

with a sheet metal protection against accidental

fall of the keyboard. The printer shelf must be

minimum 12” clear below the keyboard shelf.

Beneath the printer shelf is provided shelf for

CVT/UPS and on right side of the same, depth

provided for the shelf for CPU is 16”.Frame: Top

and bottom frame of the table shall be made

from 50 x 25 x 1.2 mm rectangular pipe and

vertical pipes and

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

horizontal pipe shall be 25 x25 x 1.2 mm CRCA

square pipe. Sides of table structure are cladded

with 22 G sheets without sagging. A chrome

plated 32 mm dia. round pipe provided for foot

rest The table base has 4 no. level adjustors to

provide for unevenness of floor. All steel parts

shall be pretreated in 4-step anti-corrosion

treatment (degreasing, pickling, phosphating,

passivation) before being powder coated and

baked in oven so as to achieve 40-45 micron

thickness of the powder and a complete scratch

resistant surface and superb finish.

48 9.00 Reading chair : Supply of Reading chair having 4242.00 Rupees Four Thousand Nos

950 x 530 x 510 mm made of Moulded PP with Two Hundred Forty Two

Pu Cushion with nylon mesh Back rest and Heavy Only

duty bended stainless steel 304 grade frame with

nylon casters.The color should be Tangerine

Orange or similar for the cushion and Mesh

should be of Black/ Ash Grey

49 2.00 Newspaper Display : Supply of Natural teak 2272.50 Rupees Two Thousand Nos

coloured Newspaper Display Rack having Two Hundred Seventy

dimensions of 900 (H) x 450 (L) x 100 mm (W) Two and Paise Fifty Only

with 7 No:s pockets for which each pockets must

have 380 (L), 200 (H) and 20mm (W). The body

should be made of 18mm and Pocket with 12mm

Prelaminated Particle Board conforming to IS

12823 with 1mm PVC edge banding. The item

should be similar to the reference image.

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

50 1.00 LIBRARY READING TABLE WITH CENTRAL 15150.00 Rupees Fifteen Thousand Nos

GLASS PARTITION AND LIGHTING PROVISION One Hundred Fifty Only

(i) LIBRARY TABLE WITH PARTITION WITH

TUBE LIGHT : 1.970 x 1.250 x 750 The table

shall consists of 25 mm thick particle board, all

the exposed edges are protected with 2mm thick

PVC lipping affixed with hot melt glue. The table

top should be supported on 40 x 40mm pipe

frame suitably strengthened to make it rugged

and also suitable to with stand vagaries of use.

Reading surface should be illuminated with

power saver light system (with T-5 fluorescent

tube) in a white painted metallic reflector to

provide uniform lighting level and to prevent

glare. The tubes input terminals should be fixed

inside a terminal strip provided on the end of the

metal reflector shade. The table should be

provided with frosted glass partition-frosted on

one side to give soothing effect in the library hall

besides avoiding interference from the readers

seated on either side of the table. The glass

partition should in two piece and held between

three verticals supports

( one each at both ends and one at the centre)

made of .08m CRCA sheet and of size 500mm

High x 100mmWide x 20mm Deep, inside

cladded with 17 mm thick pre-laminated MDF

board having groove for holding glass partitions.

17 mm thick board is also provided on the top

and bottom of the glass for holding the same

along the length of the table top. The table

should be provided with foot rest making clear

gap of 12mm from the floor level, for all the

readers. Table side frame should be cladded with

17mm thick pre-laminated board. Table should

be provided 17 mm thick pre-laminated modesty

of 280mm high along the length of the table and

below table top to lessen disturbance to the

persons on either side of the table. Steel welding

wherever required, should be done by MIG

welding process to Minimize distortion and for

the deep penetration of the weld. All steel parts

shall be pretreated in 4-step anti-corrosion

treatment (degreasing, pickling, phosphating,

and passivation) before being powder coated

and baked in oven so as to achieve 40-45 micron

thickness of the powder and a complete scratch

resistant surface and superb finish.

It Quantities Item of Work Unit Total amount

It Quantities Item of Work Unit Total amount

No. estimated according to

but may Rs. In In Words estimated

be more Figures. qty

51 1.00 MAGAZINE RACK WITH INSIDE STORAGE 8585.00 Rupees Eight Thousand Nos

Size : 1.828 X 0.914 X 0.025 Five Hundred Eighty Five

Magazine rack made from pre-laminated particle Only

board, having 15 nos Storage pockets for the

front display. Each storage is provided with

particle door with MS CRCA sheet handle. Old

magazine and journals can be stored in the back