GE/SMB/T-47/2019-20

Amount

Excavation in tranches in any type of soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation, laying of cable, sewage line, manholes etc, complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation /sub base of floor, filling and mass concrete.complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge.

M&L of half brick work with sub class 'B' burnt bricks straight or curved on plan any radius bult in CM 1:4 complete all as specified and as directed by Engr-in-charge.

M&L for 40 mm thick DPC to horizontal or vertical surfaces including necessary form work in PCC 1:2:4 type B-0 using using 12.5mm graded stone agg with integral WPC @ 3 % of cement by weight. Note:- Integral WPC Shall be measured and paid separately.

Supply only integral WPC of approved quality.complete all as specified and as directed by Engr-in-charge.

M&L for rendering 20 mm thick in cement mortar 1:4 on brick work or concrete surfaces as in bearing plaster complete all as specified and as directed by Engr-in-charge.

M&L for providing two layers of bituminised craft paper over bearing plaster. complete all as specified and as directed by Engr-in-charge.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in any type of soil.complete all as specified and as directed by Engr-in-charge.

Spreading and levelling in floor etc with excavated soil in layers n exc 25 cm thick and including watering and ramming complete all as specified and as directed by Engr-in-charge.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed by Engr-in-charge.

Form work to sides and soffits of roof beam, lintels, cantilevers, overhangs etc for fair finished faces complete all as specified and as directed by Engr-in-charge.

M&L for formwork to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick [Horizontal or sloping] for fair finished faces complete all as specified and as directed by Engr-in-charge.

Form work to edges of concrete flats, roofs exc 5 cm wide and n exc 10 cm wide, complete all as specified and as directed by Engr-in-charge.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified and as directed by Engr-in-charge.

S&F TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips. complete all as specified and as directed by Engr-in-charge.

S&F TMT bars 10 mm dia & above as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips. complete all as specified and as directed by Engr-in-charge.

Ditto all as per item no 16 but 5 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders.complete all as specified and as directed by Engr-in-charge.

M&L for RCC 1:1 1/2 : 3 type A1 using 20 mm graded stone aggregate as in lintel upto 1.5 m clear span, bands cover slab and the like including necessary form work.complete all as specified and as directed by Engr-in-charge.

M&L for RCC 1:1 1/2 : 3 type A1 using 20 mm graded stone aggregate as in chajjas.complete all as specified and as directed by Engr-in-charge.

M&L for RCC 1:1 1/2 : 3 type A1 using 20 mm graded stone as in slabs supported on walls and the like complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15 mm thick on concrete surfacres on roof slab in cement mortar 1:4 using integral WPC @ 3 % of cement by weight when concrete is green [ Integral water proofing shall be measured and paid separately]

M&L for rendering 10 mm thick on brick work/ concrete internal surfaces in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15 mm thick on external faces of brick work or concrete surfaces in cement mortar 1:4 using integral WPC 3 % of cement content by weight (Note : Integral WPC shall be measured and paid seprately )

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 complete all as specified and as directed by Engr-in-charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone agrregate) as in floor finished complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:5:10 type E2 (using 40 mm graded stone agrregate) as in subbase etc filling & mass concrete, complete all as specified and as directed by Engr-in-charge.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engr-in-charge.

S & F Factory made 35mm thick, IInd class H.W.Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engr-in-charge.

Providing and fixing factory made PVC internal UPVC (rigid) door frame of the size 50mm x 95mm with a wall thickness of 5mm, made out of extruded 5mm thick, PVC sheet of density 600kgs/cbm manufactured by an ISO-9000 certified company, mitre cut at two corners and joined with 4 nos of 150mm long brackets of 15mm x15mm M.S. square tube of 19 guage through out the frame .The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using anchor fasteners.A minimum of 4 nos .of screw to be provided for each vertical member & minimum 2 nos. for horizontal members etc. complete as per manufactures specification and direction of Engr-in-charge.

S & F Supply and fixing Box type Steel fixed ventilator comprised of tubular frame, hold fast etc all as specified complete dovetailed or welded complete including 10 mm squre bar as in grill 100mm C/C incl a shop coat of red oxid paint complete all as specified.Steel windows/ ventilator for industrial buildings, fixed type, with glazing bars complete all as specified and as directed by Engr-in-charge.

Supply and fixing Box type Steel windows comprised of tubular frame and shutter made out of 1.25mm thick MS sheet tube factory made with double side hing wire gauge shutter and glaze shutter, of size 79 mm x 39 mm 16 gauze rectangular tubular frame with side hung shutters with glazing bars 12X3 mm flat iron including box/pintol type hinges with steel handles and steel peg stays, hold fast etc all as shown on drg no CEPZ/TD-354/09 sheet 1/3 to 3/3 complete dovetailed or welded complete including 10 mm squre bar as in grill 100mm C/C incl a shop coat of red oxid paint , complete all as specified and as directed by Engr-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and as directed by Engr-in-charge.

S&F 4 mm thick figured, pin head type glass ordinary quality and glazing with oil putty or wooden beading in square n exc 0.50 sq m in each pane.complete all as specified and as directed by Engr-in-charge.

S&F Butt hinges 100 mm medium weight stainless steel 304 G complete all as specified and as directed by Engr-in-charge.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long (ISI Marked).complete all as specified and as directed by Engr-in-charge.

S & F Aluminium alloy, anodised, sliding door bolt 300 mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.complete all as specified and as directed by Engr-in-charge.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge.

Supply only stainless steel wire cloth 0.36 mm nominal dia of wire and average of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified and as directed by Engr-in-charge.

Non skid coloured ceramic tiles 7 to 8mm thick, joint free (square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified and as directed by Engr-in-charge.

M&L glazed coloured ceramic tiles in vertical surfaces of wall of size 350x 250x 7mm/ 450X 350X 7mm/450X 300X 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 on brick /concrete surfaces complete all as specified and as directed by Engr-in-charge.

S&F counter top wash hand basin oval type vitreous china white size 630 x 425 x 160mm excluding taps, waste chain and plug complete all as specified and directed at site (Make : Parryware / Hindware or equivalent as approved by GE

M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified and as directed by Engr-in-charge.

S&F looking mirror frame less, bevelled edge, fancy type area exc 0.50 Sqm but not exc 1.5 Sqm of 4 mm thick glass & mounted on 4 mm thick plywood complete all as specified and directed by GE. (Make of glass : Modi float / Saint globin / Triveni float glass)

S & F in repair PVC connection 15mm with PTMT nut of length 450 mm long complete all as specified and as directed by Engr-in-charge.

S&F angle valve one way cast copper alloy, fancy type, chromium plated with cup (concealed type) (bore of pipe 15 mm) all as specified and directed.(Make;-Prayag cat no 8310, NMV / SOMA or equivalent as approved by GE

Cutting chases, on brick wall pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth for consealed water tubing etc and making good, disturbed surface to match.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor.complete all as specified and as directed by Engr-in-charge.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed by Engr-in-charge.

M&LPVC ( SWR ) floor trap for 75 mm bore pipe outlet , plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

S&F PVC ( SWR ) bends ,75 mm bore of of any radious complete all as specified and as directed by Engr-in-charge.

S&F 75 mm bore PVC ( SWR ) pipes single socketed , in any length laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

S&F 110 mm bore PVC ( SWR ) pipes single socketed , in any length laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.

S&F bib taps for 15 mm bore pipe cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed (Make : NMV/ NMC or equivalent as approved by GE)

Supply only pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm)

S&F 125 mm chromium plated shower rose with or without swivel joints any size incl. fixing to steel pipe or union complete all as specified and as directed by Engr-in-charge.

S & F 15 mm concealed type fancy type, chromium plated with long shank and cup stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-charge.

S&F vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern & flush pipe) including connection to outgoing drain & flushing pipe complete all as directed.(Make:-Parryware / Cera / Hindware)

S&F CP Jet fixed to WC (E) type including fancy type with PVC connections.complete all as specified and as directed by Engr-in-charge.

S& Fixing Vitreous china ,Squatting pan 'Orissa' pattern size 580x440mm white with integral foot rest including all joints and making good to the floor,etc complete all as specified. (Make:-Parryware / Cera / Hindware)

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl urinal spreader complete all as specified and as directed by Engr-in-charge.

S&F Rotational moulded polyethylene coloured water storage tanks (cylinderical vertical with closed top) hosted and fixed in position (1000 Litres capacity) complete all as specified and as directed by Engr-in-charge. . ISI Marked (Make : Sintex / Dhara or equivalent as approved by GE

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe (Make : Prayag)

S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

Supply only PVC valveless, Dual flush syphonic action type, flushing cistern, ISI mark low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

Supply only waste fittings brass chromium plated for glazed ware basin etc, 32 mm dia with long screwed shanks and flynuts, flange and bedded in red lead cement and other end fixed.

S&F CP brass tubular towel rail 20 mm dia D type, 60cm long including brackets complete all as specified and as directed by Engr-in-charge.

M&L for preparing of new previously untreated surfaces of wood or wood based material over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing of new previously untreated surfaces of Steel and Iron surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing new surfaces on wall plastered or unplastered surfaces and applying two coats of cement based paint complete all as specified and as directed by Engr-in-charge.

M&L for preparing surfaces, plastered or unplastered new surfaces of walls and applying three coats white wash complete all as specified and as directed by Engr-in-charge.

M&L for preparing New plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed by Engr-in-charge.

M&L for broken stone hard core of gauge not exc. 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surfaces complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C-1(using 20 mm graded cr. stone aggr), 75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m and joints filled with bitumen sand mastic with ratio (1:3 ) complete all as specified and as directed by Engr-in-charge.

Filleting section not exc 25 Sqcm in any position and any shape in CM 1:3 including all miters stop etc.complete all as specified and as directed by Engr-in-charge.

M & L Cement concrete 1:2:4 type B1 in surface channels and drains, complete all as specified and as directed by Engr-in-charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and as directed by Engr-in-charge.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm/30cmx30cmx20mm thick, PU coated,rubber moulded glosy finish, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in cement mortar 1:6 complete all as specified.

Providing, cement concrete type B-0 (1:2:4 using 12.5mm graded stone agg) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for rendering 15 mm thick on external faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Precast cement concrete 1:2:4 type B-I (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc.), chullah hoods, chajjas, shelves and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed.

Supply and laying PVC (SWR) pipes 150 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

M & L concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in 150 mm dia pipe complete all as specified.

Septic tanks exc, in ordinarysoil foundation in PCC 1:2:4 brick work in CM 1:4 RCC Slab covers including RCC precast manhole cover having 6 mm plate embedded all around/ fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete for 50 users. Drg no CEPZ/C-TD/13/13

Soakage walls exc,, in ordinary, Soil, Foundation in PCC 1:3:6 Well of Honey combed and soild in M-25 Concrete, including interceting chamber screen chamer Brick work in CM, RCC cover slab in M-25 / RR masonry/ Filling with brick bast complete of size 1.8 M dia x 4.5M deep. Drg no CEPZ/C-TD/13/13

M & L cement mortar 1:2 Setting coat 3mm thick, trowelled to even and smooth finish, complete all as specified and as directed by Engr-in-charge.

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC conduit of siitable size with all fittings (ISI Mark) controlled by one switch including MS sunk box of required size, & 3mm thick laminated sheet, including cutting chases to wall making good match with the existing specification with all accessories fixed on wall including PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and for having the switches, switch sockets regulator etc complete all as specified and directed at site for following:-

87 a) One light/fan point controlled by one switch

87 b) One 5 Amps socket point on same board

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including suitable size PVC non metalic rigid casing and caping with all accessories fixed on wall including PVC insulated, unsheathed multistranded copper conductor cable 2.5 sqmm as earth continuty conductor, connecting to common eatrh dolly and PVC moulded box ISI marked for housing one No switch socket 15Amps complete all as directed

Switch Socket combination 2 in 1, 3 pin, 16 Amp, flush type, AC 230 volts etc complete all as specified and directed.

Switch Socket combination 2 in 1, 5 pin, 6 Amp, flush type, AC 230 volts etc complete all as specified and directed.

Switch piano flush type, single pole, 6 Amp, one way, AC 230 volts etc complete, all as specified and directed.

Supply and fix ceiling rose surface bakelite three terminal of size 50x 24 mm,240 Volts AC complete all as specified and as directed by Engr-in-charge.

Lamp holder insulated body with back plate suitable for batten fitting including 18 Watt LED Lamp of approved make and cat part PVC Round/Square block etc complete all as specifeid and directed.

Sand cushioning for cable in trenches of thickness 8 cms below and 15 cms above the cable all as specified and directed By Engineer-in-charge.

M&L Well burnt sub class 'B' bricks for protection of cable laying flat across and perpendicular to the length of cable all as specified and directed by Engineer-in-charge.

Supply & fix Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient tube light fitting including complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 18 watt all as specified and directed by Engr-in-Charge.

S&F MCB SP 6 to 40 Amps, 240 Volts with breaking capacity of 10 KA,

S&F steel sheet enclosure double door type for MCB DB SPN 04 way, 240 volts AC factory made, suitable for housing MCB SPN and SP along with 200 Amps copper bus bar complete all as specified and directed

S&F MCB SPN 63 Amps, 240 Volts with breaking capacity of 10 KA

Supply and fix Exhaust Fan AC single phase 240V of size 300 mm Sweep with louver complete all as specified and directed by Engr-in-Charge.

Replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core laid in trenches/through pipe /under culvert etc, with proper size copper thimbles for connection Incl. testing, complete all as specified and directed

SIDDAHANT ENTERPRISES

s k construction co