Renovation of Submarine Office at EKM Pipe shop

PART-A (CIVIL WORKS)

Providing 15 mm thick plaster with CM(1:4) to walls at all heights and to ceilings, beams, Stair-case, lintel soffits, chajjas, projections, narrow bands and widths etc., including chipping at damaged surfaces/portions and including cost of all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer.

Repairing of all kinds of false ceiling, replacing of damaged false ceiling boards including all materials, consumables, labours etc., complete as directed by Engineer-In-charge.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) for Doors, windows and partitions to balcony enclosures with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS. 733 and IS. 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e., at top, bottom, and sides with required EPDM rubber / neoprene gasket etc., the sections shall be smooth, rust free, straight , mitred and jointed mechanically where-ever required including cleat angle, Standard window partition glass, powder coated alluminium snap beading for glazing / paneling, C.P.Brass / Stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors with aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, hinges, washers, cleats, weather silicone sealant, backer rods etc. where-ever required including the cost of EPDM rubber / neoprene gasket required with clear glass panes of 5mm thickness complete all as directed. (quoted rate including removal of damaged alluminium doors & windows etc.,)

Applying two coats of putty of approved brands birla / JK to internal walls surfaces including applying suitable primer on old wall surface thourough scrapping and preparation. Putty shall be finished till a smooth and even surface is achieved. (Rate includes removal of old paint with Buffing machine)

Apply two coats of premium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes removal of old paint with Buffing machine)

Apply two coats of premium quality arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes removal of old paint with Buffing machine)

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying wood putty / metallic putty and prime coat complete all as directed

Supply, Fabrication and erection of structural steel for side supports / purlins by using MS tube sections, angles and ISMB etc fixed to existing steel trusses/beams/angles including cutting, hoisting, fixing in position and applying two (02) coats of expoxy paint over a one coat of primer complete as directed by Engineer In charge.

Supply of 14/20mm dia fully threaded GI bolt of 8.8 grade, 600mm long with required nuts and washers etc., complete all as directed.

Providing and fixing CP soap Dish Holder of approved make having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., complete

Providing and fixing white vitreous china flat back lipped front Urinal basin of 430x260x350 mm of Parryware of Hindware make with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (Parryware/ Hindiware)

Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Parryware / Hindware / Jaquar make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap of Hindware/Parry make, 32mm dia Chrome Plate waste couplings, flexible waste hose, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete

Providing and fixing PVC Shower rose with 15 or 20mm inlet including all connections and acessories complete all as directed.

Supply & Fixing Brass CP bib cocks (long body) of make Waterteck or its equivalent Complete all as directed.

Supply and providing UPVC Nano - trap of make sudhakar or supreme with ss grating complete all as directed.

Providing and fixing 600mm wide CP Towel rail of standard length of approved make including all accessories etc., complete

Providing CP health faucet including 1.5m flexible pipe of make Watertec or its equivalent including all accessories etc., complete

Supply, fit and fix white glazed earthenware European type water closest of Parryware / Hindware / Jaquar make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level cistern of 10 litres capacity of same make as specified including all fittings, materials, tools and labour etc., complete.

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed. (Rate includes scrapping of old surface by manually with sand paper etc.,)

Providing and fixing 1st quality 10 mm thick (edge cut) Ceramic Glazed tiles of size (300x600mm) Concept tiles in dados conforming to IS : 15622, of approved make SOMANI / KAJARIA / CERA /JOHNSON, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chpping of existing old damaged wall tiles and providing one layer of plastering with CM (1:5))

Providing and fixing 1st quality anti-skid floor tiles in toilets & wash rooms of 10mm thick conforming to IS : 15622, of approved make SOMANI / KAJARIA / CERA /JOHNSON in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chipping of existing floor tiles)

Fixing of Galvalume sheet roof by supplying & using self drilling/self tapping screws @500mm c/c along the length of purlins and whereveer specified by engineer complete as directed.(Sheets will be issued free by HSL, Contractor has to collect the sheets from HSL Colony)

Supply & Fixing 15 mm dia bore Brass C.P angle cocks/stop cocks of waterteck or its equivalent standrd quality with 15mm dia bore and Complete all as directed.

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (sudhakar/supreme/ prince make) complete

Providing and fixing 25 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge.

Providing and fixing 15 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints (sudhakar/supreme/ prince make) complete as per direction of Engineer in Charge.

Supply and fixing of 25 mm thick PVC doors with frame & shutter for toilets (Sintex / Hi-Tech or equvilant make) including aluminium aldrop, towerbolt, handles and butt hinges etc., complete

PART-A (ELECTRICAL WORKS)

1.5 Ton capacity, 5 STAR Inverter Window AC,1PH, 230 V, 50 Hz, (Copper Condenser Turbo Cool) Refrigerant: R32., along with supply ,installation with Automatic voltage stabulizer,drain pipe, and control cables etc.

Supply, fix, test and commissioning of 1 phase 240V, 50 Hz 400mm sweep wall mounting fan. (Approved make :CG/Almonard/Havells/Orient or Equivalent.)

Supply, fix, test and commissioning of 20A DP MCB DB &16A Socket with enclosure for AC as directed by the engineer incharge. (Approved make :Legrand/ CG/Havells/.or Equivalent.)

Supply, fix, test and commissioning of 20watt LED Tube light as directed by the engineer incharge. :CG/Havells/Phillips.)

Supply, fix, test and commissioning of 8 modular type switch board with 3no 3pin,6A socket with 2no switches as directed by the engineer incharge.

Surface PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch

NAGARJUNA ENGINEERING WORKS (BID ID -419916)

VENI ENTERPRISES (BID ID -419951)