Providing and Fixing 315 mm Dia. HDPE Pipeline for filling Village Tank Old Survey No. 214 and New Survey No.297 of Village:- Varvada, Ta.Talod, Dist.Sabarkantha @ Existing Scour Valve Ch.11309mt of Madhavgadh-Raygadh Pipeline Project.

Name Of Work :- Providing and Fixing 315 mm Dia. HDPE Pipeline for filling Village Tank Old Survey No. 214 and New Survey No.297 of Village:-

Varvada, Ta.Talod, Dist.Sabarkantha @ Existing Scour Valve Ch.11309mt of Madhavgadh-Raygadh Pipeline Project.

Quantities Rate Total Amount

Quantities Rate Total Amount

Item estimated but according to

Item of work In Figures

No. may be more or In words Unit estimated

Excavation of pipeline trenches/ foundation trenches in the

strata shown below including depositing the excavated

stuff as and where directed upto lead of 50 Mts. and

Rupees Two Hundred

Mt lift of excavation below average G.L. incl. refilling,

1a 2490.55 221.19 Twenty One and Nineteen Cmt

cleaning the site with thin jungle cutting but excluding

dewatering if any.

(A) Excavation in all sorts of soil.

Excavation of pipeline trenches/ foundation trenches in the

strata shown below including depositing the excavated

stuff as and where directed upto lead of 50 Mts. and

Rupees Two Hundred

Mt lift of excavation below average G.L. incl. refilling,

1b 536.64 232.30 Thirty Two and Thirty Cmt

cleaning the site with thin jungle cutting but excluding

dewatering if any.

(A) Excavation in all sorts of soil.

Providing and Jointing MS pipe of required length with MS

Flange of following dia by necessary cutting and welding

works and laying the same in excavated trench of rising

Rupees Five Thousand

main. suction/delivery of pump motor after laying the

2 10.00 5317.65 Three Hundred Seventeen Rmt

flanged pipes joint with necessary nut bolt of required size

and Sixty Five Paisa Only

by using rubber packing of required thickness after fitting

MS pipe paint with anticorrisive paint etc complete

MM Dia 7.1 mm thick

Providing and supplying, lowering, laying and Jointing in

standarad length ISI mark high density polyethylene

H.D.P.E. pipes sutable for portable water as per IS

specification no 4984/1995 including butt fusion welding

Rupees Two Thousand

including all local and central taxes (excluding GST),

3 1800.00 2323.00 Three Hundred Twenty Rmt

transportation, freight charges, octroi, inspection charges,

loading , unloading, conveyance to the dept. store or to

the site, Including cost of labour, material, giving

satisfactory hydraulic testing and specials (Bends, Tee

etc) etc complete. (a) 6.00 kg/cm2 (14) 315 mm dia

Providing & Fixing ISI mark Air Valve (Double Acting)-80

mm dia with necessary fittings of standerded design and

specification, 80 mm dia Medium duty G.I. Pipe 3.50 mt

long and M.S.Flange-80mm dia, etc all done with testing, Rupees Seven Thousand

4 7.00 welding of flange with G.I. Pipe, incl. all taxes (excluding 7114.00 One Hundred Fourteen Nos.

GST), labour charges, insurance, transportation, freight Only

charge, inspection charge, loading & unloading,

Conveyance to store, stacking with all leads and lifts etc.

complete done as per approved drg. by EIC etc complete.

Providing and laying hand mixed and unvibrated plain

cement concrete as under of different proportion for

foundation lain in situ including temping smooth

Rupees Three Thousand

finishing,curring, and lead upto 50 Mt. Moreover, lift

5 49.23 3522.88 Five Hundred Twenty Two CM

Mt. etc.complete.

and Eighty Eight Only

(a) C.C. of cement sand and Course aggregates (20mm to

Providing and laying hand mixed and unvibrated plain

cement concrete as under of different proportion for

foundation lain in situ including temping smooth Rupees Four Thousand

6 113.90 finishing,curring, and lead upto 50 Mt. Moreover, lift 1.5 4726.80 Seven Hundred Twenty Six CM

Mt. etc.complete. and Eighty Only

(b) C.C. of cement sand and Kapchi (20 mm & under)

Providing and fixing in position mild steel reinforcement or

tor steel bars reinforcement as per detail drawing and

Rupees Sixty Four and

7 8692.184 design including cutting bending and binding in position 64.64 KG

Sixty Four Paisa Only

with binding wires as directed with all leads and lifts

etc.complete. TMT Bar FE-415

Providing and Supplying ISI mark CI D/F sluice valves as

per IS:14846 (Latest Edition) of following class and

diameter including all taxes, insurance, transportation, Rupees Twenty Thousand

8 1.00 freight charges, octroi, inspection charges, loading, 20946.00 Nine Hundred Fourty Six Nos.

unloading, conveyence to departmental stores, stacking Only

etc complete. - PN 1.6 With Hand wheel/Cap Operated

(PD type Short body) - Diameter : 300 mm Dia.

Lowering, laying & jointing in position following C.I./ D/F

Reflux valve, Butterfly valves, Sluice valve and Air valves Rupees One Thousand

9 1.00 including cost of all labour, jointing material, including nut 1141.00 One Hundred Fourty One Nos.

bolts & giving satisfactory hydraulic testing etc. Complete. Only

- Sluice valve - Dia. in mm : 300 mm Dia.

Providing and laying dry rubble pitching of various

thickness to required grade including trimming of earth Rupees Three Hundred

10 15.00 work, hand packing the interstices with spauls, filling earth 397.18 Ninty Seven and Eighteen Cum.

in interstices pannelling complete for all leads and lifts. Paisa Only

Providing and Supplying In Standard Length ISI mark rigid

unplasticised PVC Pipes Suitable For Potable Water With

Ring fit Joint Including Cost of rings, as per IS

Specification no 4985/1988 Including all Local and Central

taxes, Transportiton, Freight Charges, Octroi, Inspection Rupees Four Hundred

Charges, Loading, Unloading, Conveyance to the Thirty Only

Departmental Stores and Including Cost Of Jointing

material etc. Complete. - Test Pressure : 6.0 Kg/cm2 -

Pipe Dia in mm : 160 mm Dia.

Supplying & Fixing Road Sign Board of MS Plate & Angel

Rupees Two Thousand

Iron Incl Painting Lettering Etc Comp Incl Fixing in

12 0.54 2410.87 Four Hundred Ten and Sqmt

CC(1:4:8)With necessary Excavation Etc Comp As per

Eighty Seven Paisa Only

IRC Type Design (Non Reflective Type)

Rupees Twenty and

13 10500.00 Crop Compensation for ROW 20.20 Sqmt

Twenty Paisa Only

Sixty Four lakh Eighty Seven Thousand Six Hundred Fourty Three Rupee and Eighty Seven Paisa only

I/We am/are willing to carry out the work at………………………...…% above/below.

Percent (Should be written in figures and words.) of the estimated rates mentioned above. Amount of my/our tender works out as under :-

Estimate Amount Put Estimate Amount Put to tender. Rs:

to tender.Rs: 6487643.96

%below Rs: Add……… %above.Rs:

Net……………… Rs: Total Rs:

In words.. In words

Note: All works shall be carried out as per public works Department Handbook and other specification of Division or As directed.

Note: All the columns is schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his

Note: Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions,

3: site, moisture, weather etc..

Note: To be continued on additional sheets, if found necessary.

Signature of the Executive

Signature of the contractor: