Special repair of Bldg No P-283 and 293 at 71 WEU in Army area Jodhpur

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement complete all as specified and directed.

S&F machine made precast cement concrete blocks (interlocking pavers) of 60mm thick (rubberised) with 6mm top layers of material laid over and including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm graded stone agg) all as directed by Engr-in-Charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

Cutting openings, throughstone walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable mtrl to store and rubbish not exc. 50m

M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No 9 above but except stone complete all as specified and directed.

M&L PCC solid building blocks 10 cm thick type B1 1:2:4 using 20mm graded stone agg set in cement mortar (1:6) complete all as specified and directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone slab flooring etc over 20mm thick cement concrete type B-O 1:2:4 (using 12.5 mm graded crushed stone aggregate) leveling course screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in riser of steps, skirting, dado and piller laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including 10 mm thick rendering in cement mortor 1:6 complete all as specified and directed.

M & L 18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the out of MOD land complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish complete all as specified and directed.

M&L non skid ceramic colour joint free tiles 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed .

M&L for glazed colour ceramic tiles of size 250x350x7mm/300x450x7mm thick, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed 10mm thick rendering in CM (1:4) in coloured tiles to match the shade of tiles complete all as specied and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 10 mm thick in CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

M&L Rendering 5 mm thick in CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M&L for preperartion of newly plastered surfaces of wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified & directed.

Material and labour for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface all as specified and directed.

M & L for three coats of white wash on newly plastered surface of wall including preparation of surfaces complete all as specified and directed..

M & L for three coats of white wash on newly plastered/unplastered surface of ceiling including preparation of surfaces complete all as specified and directed.

M & L for one coat of white wash on old surface of wall complete all as specified and directed..

M & L for one coat of white wash on old surface of ceiling complete all as specified and directed.

M & L for two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed.

M & L for two coat of cement base paint on plastered/unplastered surfaces over one coat of white wash on wall including preparation of surface complete.

M & L for one coat of colour wash on old surfaces including preparation complete all as specified & directed.

M & L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Dismantling of asbestos cement/GI// PVC ( corrugated , semicorrugated , etc ) sheet in roof covering.

Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Dismantling wrought iron or mild steel work of any description.

S & F for mild steel work in tubuler posts , rafter, purline etc. including special shaped washer etc. complete using ERW or including butt welded tubes conforming to IS-1161-1976 grade st -240 complete all as specified and directed.

Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed.

From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surfaces complere all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete.

M & L RCC 1:2:4 type B-1design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc complete all as specified and directed.

M & L RCC 1:2:4 type B-1 design Mix M-25 using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. complete.

S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Taking down chowkhats or frame withou taking off shutter area exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down chowkhats or frames area not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

M&L for Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

M & L for mild steel framed work as in brackets etc for coller stands framed steps/stairs, chajja etc complete using MS angle iron Steel bars gusset plate incl cutting holes for cooler stand and chajja etc complete all as specified & directed .

S&F in repairs MS chromium plated peg set of five fixing with wall complete

M &L for fabrication of pressed steel cupboard shutters using 0.80 to 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and directed.

S & F 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item complete all as specified and directed.

S&F aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

S &F of stainless steel butt hinges 100 mm size complete all as specified and directed.

S &F of mild steel butt hinges 100 mm size complete all as specified and directed.

S&F 100mm size single action door spring hinge complete all as specified and directed.

S & F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and directed.

S/F of aluminium anodized,tower bolt 200 mm long complete all as specified and directed.

S&F Mild steel pressed handles, oval type, stove enameled black of size 150mm

Taking down old wooden/ steel window/ventilator complete.

S&F factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded, with cooler opening as per drg. CE/JZ/TD/20 to23 sheet1/3 to 3/3 with one shop coat of zinc chromate primer complete all as specified and directed by the Engineer-in-Charge

S&F factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded, with cooler opening as per drg. CE/JZ/TD/20 to23 sheet1/3 to 3/3 with one shop coat of zinc chromate primer complete all as specified and directed by the Engineer-in-Charge

S&F factory made mild steel box type ventilator with top hung shutter as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 complete for glazing dovetailed or welded all as specified

S&F factory made mild steel box type ventilator with top hung shutter as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 complete for gauze dovetailed or welded all as specified.

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

S/F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed.

S/F for 3 mm thick plain sheet glass ordinary quality & glazing complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and directed.

M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast or for filled in door frame etc and iron fixing including necessary form work all as specified.

S&F MS with PVC coated decorative 25mm dia curtain rod with fixing brackets, knob etc as in repairs complete all as specified and directed.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc all as specified & directed.

S & F as in repairs vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat cover and jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S & F in repair Vitreous china wash basin as in repairs, white flat back size 550x400 mm including , waste pipe, MS brackets complete all as specified and directed.

Supply & Fixing in repair low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450/600mm all as specified and directed.

S/F in repair of chromium plated shower rose 75mm dia round shape complete all as specified and directed.

S & F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S &F in repair 20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S & F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange complete.

S& F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

S&F in repair of bib, cock 15mm dia, cast copper alloy with crutch or butterfly handle, screwed for iron pipe all as spcified as fixed .

M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete

Supply only Integral water proofing compund (ISI Marked).

M/L for 25mm thick cement concrete type B-1 1:2:4 (using 20 mm graded crushed stone aggregate) complete as in levelling of floor etc all as specified and as directed.

Taking down existing old Tar-felt from RCC roof, stone roof in any thicnes etc carefully including cleaning the roof surface by wire/coir brush and remouving all grits, stones, fungus , moss and finally washing down with water to the entire satisfaction of Engr-in-Charge .

Material and labour for providing cement concrete (1:2:4) type BO using 12.5mm graded crushed stone aggregate as over roof for making good depression/undulation to make the existing as filling in depression of roof slab complete all as specified and directed.

M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggregate with grooves shall not be exceeding 0.40 Sqm.

M&L for high quality looking mirror with fancy type 5mm thick beading teak wood colour fixed to wall with chromium plated screw area n exc 2.0 sqm complete all as specified and as directed

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on brick or concrete surface complete all as specified & directed.

Disconnecting of old serviceable PVC tank setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.

S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009, complete.

S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009, complete.

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L 50 mm thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth all as specified and directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

S & F GI water tubing, medium grade, galvanized, with all fittings fixed to wall ceiling or laid in floor all as specified (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore as directed

S&F 100 mm dia Cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed

S&F 100 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F 75 mm dia Cast iron soil waste and vent sand cast pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

S&F in repair 100 mm dia CI branch pieces single socketed T equal or unequal complete all as specieied and directed.

S&F in repair 75 mm dia CI branch pieces single socketed T equal or unequal complete all as specieied and directed.

S&F in repair 100mm dia CI bends any radius complete all as specified and directed

S&F in repair 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed.

S&F in repair 100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI vent cowl fixed to pipe complete all as specified and directed.

S&F in repair 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia

S&F in repair of PVC (SWR) gully trap 125/110 mm size including setting and jointing with solvent all as specified and directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

All as per item No 127 above but One fan /Exhaust fan, point controlled by one way switch.

All as per item No 127 above but One socket outlet 3 pin 6 Amps on same board

All as per item No 127 above but One socket outlet 3 pin 6 Amp on independent board

All as per item No 127 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp FT.

S&F socket out let , 3 pin ,16 Amp FT. ISI Marked

supply and fix socketed stepped type electonic fan regulator flush type , ISI Marked.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings ISI Marked.

Fixing only LED tube light fitting Box type 20/22 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable. Note:- 20/22 watt LED tube light fitting shall be issued under sch 'B' free for fixing.

M/L in repairs sub main wiring with 4.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length.

M/L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

S&F distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way vertical type, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 40 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

S&F MCB 4 pole 100 Amps, 16 kA, ISI Marked.

Fixing only connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of Flat iron 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified. nOTE:- Street Light fitting 30/45 watt shall be issued under sch 'B' free for fixing.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

S. D. Construction Co.

Diva Infra

ABHOG INFRASTRUCTURE PRIVATE LIMITED

DEV INDUSTRIES

Jai Doulat Construction Co