Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-AOC | L1 | Accepted-AOC Accepted Vide Resolution No.VII(3) dtd.22-04-2025 of KANJIKUZHY GP | |
| 2 | L2₹3.2 L+₹11,957.38 (3.90%)Accepted-AOC | L2 | Accepted-AOC Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | KISHORE P M L2 | ANSHAD A L1 |
|---|---|---|---|---|---|
| 1.00Anganwadi maintenance | |||||
| 1.00 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | 4.8 | sqm | 843.06 ₹4,046.69 | 811.46 ₹3,895.01 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 0.36 | cum | 8,258.33 ₹2,973 | 7,948.88 ₹2,861.6 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 787.07 | kg | 196.25 ₹1,54,461.51 | 188.89 ₹1,48,668.71 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 368.6 | kg | 157.45 ₹58,036.07 | 151.54 ₹55,857.64 Lowest |
| 1.00 | OD462777/2024-2025:Providing and fixing aluminium trafold sheet precoated (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.45mm or nearest available
thickness, total coated thickness with zinc coating 120 grams per sqm as per IS: 277,
in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and
polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be supplied in
single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be
fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost
of purlins, rafters and trusses and including cutting to size and shape wherever required. | 94.11 | per sqm | 773.86 ₹72,831.06 | 744.86 ₹70,101.75 Lowest |
| 1.01 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 30.7 | metre | 863.89 ₹26,521.42 | 831.52 ₹25,527.66 Lowest |
Tender Value
₹3.2 L
EMD Value
₹8,051
Closing Date
11 Apr 2025, 3:00 pmClosed
sini.s
OFFICE OF THE ASSISTANT ENGINEER,KANJIKUZHY GP
Annual Plan-Kanjikkuzhy GP-2024-25-Maintenance of Anganwadi no.47in w-4
2025_LSGD_758238_5
1/Ae/LIDEW/24-25
Open Tender
Civil Works - Roads
Item Rate
180 days
KANJIKUZHY GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹710
Yes
₹8,051
Yes
13 Nov 2025
4 Apr 2025
15 Apr 2025
4 Apr 2025
11 Apr 2025
4 Apr 2025
Amount
Anganwadi maintenance
5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD462777/2024-2025:Providing and fixing aluminium trafold sheet precoated (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.45mm or nearest available thickness, total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
KISHORE P M (BID ID -2195289)
Bidder Name
KISHORE P M
ANSHAD A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1232186.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .