Remaining work of Special Repair to Police Staff Qurters Cat. B-24 (G+2) at Salaya and Internal Trimix Road for Marine Police Station at Vadinar, Dist.- Dev Bhumi Dwarka.(Including Electrification) (SBD)(7th Attempt)

Name of Work :- Remaining work of Special Repair to Police Staff Qurters Cat. B-24 (G+2) at Salaya and Internal Trimix Road For

Marine Police Station at Vadinar, Dist.- Dev Bhumi Dwarka (Including Electrification)

Statement showing the approximate quantities for the items of the above work to be carried out and

Cost put to Tender for Rs.

Item Description of Item Total Unit Quated Rate in Total

No. Quantity Rate Rs. In Words Amount Rs.

(A) CIVIL WORK:

1 Dismantling existing plaster racking out joints and cleaning the surface for plaster at all 1394.38 Sqm 19.69 Rupees Nineteen and Paisa

heights including disposal of rubbish to the dumping ground within of any lead. Sixty Nine Only

2 Dismantling Sanittary fitting like wash basin, W.C. pan indian and europion type, flushing 18.00 NO. 410.13 Rupees Four Hundred Ten

tank etc. including staking the material with all lead and lift. and Paisa Thirteen Only

3 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas 354.00 Sqm 48.63 Rupees Fourty Eight and Paisa

and disposal of unserviceable materials with all lead and lift. Sixty Three Only

4 Providing 10mm thick cement plaster in single coat of interior plastering and finished even 180.00 Sqm 191.90 Rupees One Hundred Ninety

and smooth in cement mortar 1:3 (1 cement; 3 sand) and finishing with a floating coat of One and Paisa Ninety Only

neat cement slurry including providing and mixing I.S.I. make water proofing material in

cement mortar in proportion recommended by the manufacturer for ALL FLOORS.

5 Providing CEMENT VATA ( 10 cm. x 10 cm. )size quarter round in cement mortar 1:1 324.00 Rmt 24.04 Rupees Twenty Four and

including neat cement finishing, watering etc.complete Paisa Four Only

6 Providing and laying Acrylic Base (zycosil) equvivalant water proofing paint in two coats to 180.00 Sqm 110.70 Rupees One Hundred Ten

vertical and horizontal surface of depressed portion of bath and W.C. as directed by and Paisa Seventy Only

engineer -in- charge. This treatement shall be carried out over and above water proofing

cement plaster.

7 Providing and laying ordinary Cement Concrete 1:2:4 including finishing smooth and 13.50 Cum 4334.43 Rupees Four Thousand Three

curing complete,including cost of formwork but excluding cost of reinforcement For all Hundred Thirty Four and Paisa

Floors. Fourty Three Only

8 Brick work using common burnt clay building bricks having crushing strength not less than 2.00 Cum 4172.60 Rupees Four Thousand One

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Hundred Seventy Two and

Conventional Paisa Sixty Only

9 Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and 172.00 Sqm 209.88 Rupees Two Hundred Nine

finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating and Paisa Eighty Eight Only

coat of neat cement slurry AT GROUND FLOOR.

10 Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and 179.00 Sqm 236.36 Rupees Two Hundred Thirty

finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating Six and Paisa Thirty Six Only

coat of neat cement slurry AT FIRST FLOOR.

11 Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and 179.00 Sqm 262.84 Rupees Two Hundred Sixty

finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating Two and Paisa Eighty Four

coat of neat cement slurry AT SECOND FLOOR. Only

12 Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and 185.00 Sqm 209.38 Rupees Two Hundred Nine

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating and Paisa Thirty Eight Only

coat of neat cement slurry AT GROUND FLOOR.

13 Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and 186.00 Sqm 237.85 Rupees Two Hundred Thirty

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating Seven and Paisa Eighty Five

coat of neat cement slurry AT FIRST FLOOR. Only

14 Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and 186.00 Sqm 266.32 Rupees Two Hundred Sixty Six

finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating and Paisa Thirty Two Only

coat of neat cement slurry AT SECOND FLOOR.

15 Providing 20mm thick SAND FACED cement plaster on walls above ground level 307.38 Sqm 312.56 Rupees Three Hundred

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick finishing Twelve and Paisa Fifty Six

coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gukta Plaster) Only

16 Providing and fixing water closet squatting pan (Orissa type W.C. pan) first quality with 18.00 NO. 1207.07 Rupees One Thousand Two

UPVC S trap of 100 mm including jointing the trap with UPVC Pipe (size 580mm X 450 Hundred Seven and Paisa

mm in vitreous china white colour).Rate also includes making holes in RCC slab / Beam Seven Only

and fixing the trap in hanging position by M.S. clamps of required size fitted in ceiling.

17 Providing and fixing U.PVC/SWR Nahni Trap of the following nominal dia self cleaning 36.00 NO. 568.89 Rupees Five Hundred Sixty

design with top tile and strainer including cost of cutting and making good the wall and Eight and Paisa Eighty Nine

floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali. Only

18 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated 96.00 NO. 184.98 Rupees One Hundred Eighty

screw down Bib Tap. (i) 15 mm dia. Four and Paisa Ninety Eight

19 Providing & laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 60.50 Sqm 1453.19 Rupees One Thousand Four

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring Hundred Fifty Three and Paisa

by adhesive material including dismentaling of existing flooring and jointed with color Nineteen Only

cement slurry including finised with flush pointing & cleaning the surface etc.complete for

20 Providing & laying Printed Coloured GLAZED TILES 8mm thick in skirting, risers of steps 209.50 Sqm 1473.50 Rupees One Thousand Four

Hundred Seventy Three and

and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with Paisa Fifty Only

white cement slurry. including curing for all Floors size of Tiles Shall be 600mmx300mm.

21 Providing and laying 25mm thick Rough KOTAH STONE SLAB FLOORING over 20mm 18.00 Sqm 676.05 Rupees Six Hundred Seventy

Six and Paisa Five Only

average thick base of cement mortar 1:6(1 cement; 6 coarse sand) over and jointed with

grey cement slurry including rubbing and polishing etc. complete for All floors.

22 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from 303.00 KG 75.10 Rupees Seventy Five and

M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Rate is Paisa Ten Only

inclusive of welding with grinding smooth surface, two coats of Oil paint and one coat of

yellow Zinc primer coat of approved brand only. Oil paint shall be Luxol Enamel paint of

Berger Paint india limited. or asian paint apcolite premium gloss Enamel of asian paint or

Dulux premium gloss enamel of dulux paint only structural steel shall be isi mark only

23 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring 110.00 Rmt 264.97 Rupees Two Hundred Sixty

of ISI13592/92, Rate inclusive of all fittings like single or double "Y" with door, reducer, Four and Paisa Ninety Seven

coupler single T with door bend, pipe clip on Z-Patti G I etc.complete and making good Only

the wall ceiling and floor. (B) 75mm dia

24 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring 66.00 Rmt 495.91 Rupees Four Hundred Ninety

of ISI13592/92, Rate inclusive of all fittings like single or double "Y" with door, reducer, Five and Paisa Ninety One

coupler single T with door bend, pipe clip on G I Z patti etc.complete and making good the Only

wall ceiling and floor. (B) 110mm dia

25 Providing and fixing in position Upvc cowel went to pipes.(B) 75mm dia. 9.00 Each 16.47 Rupees Sixteen and Paisa

Fourty Seven Only

26 Providing and fixing in position Upvc cowel went to pipes.(C) 110mm dia 6.00 Each 28.16 Rupees Twenty Eight and

Paisa Sixteen Only

27 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 153.00 Rmt 323.15 Rupees Three Hundred

90mm Dia Complete including making good the ceiling and floor on terrace rain water pipe Twenty Three and Paisa

shall be 90 mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end Fifteen Only

near by Ground level rate are Inclusive of all Necessary Fittings required. pipe As Per

approved Material List By G.S.P.H.C

28 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 58.00 Rmt 206.73 Rupees Two Hundred Six

having National Sanitation Foundation (NSF) seal for potable water of following dia. and Paisa Seventy Three Only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. [C] 20 mm.

29 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 85.00 Rmt 251.32 Rupees Two Hundred Fifty

having National Sanitation Foundation (NSF) seal for potable water of following dia. One and Paisa Thirty Two

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete. [C] 25 mm.

30 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 57.00 Rmt 334.89 Rupees Three Hundred Thirty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Four and Paisa Eighty Nine

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete. [E] 32mm.

31 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 42.00 Rmt 443.29 Rupees Four Hundred Fourty

having National Sanitation Foundation (NSF) seal for potable water of following dia. Three and Paisa Twenty Nine

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only

complete. [E] 40mm.

32 Providing and fixing gun metal check or non return full way WHEEL VALVE ISI Heavy 3.00 Each 656.89 Rupees Six Hundred Fifty Six

Duty 40 mm dia. and Paisa Eighty Nine Only

33 Painting two coats (excluding priming coat) on previously painted wood and wood based 506.00 Sqm 114.24 Rupees One Hundred

surface with enamel paint, to give an even shade including cleaning the of all dirt, dust Fourteen and Paisa Twenty

and other foreign matter. Four Only

34 Painting two coats (excluding priming coat) on previously painted steel and other metal 78.00 Sqm 98.93 Rupees Ninety Eight and Paisa

surface with enamel paint, brushing to give an even shade including cleaning the surface Ninety Three Only

of all dirt, dust and other foreign matter.

35 Distempering (three coats) with oil bound washable distemper of approved brand & 1149.00 Sqm 115.12 Rupees One Hundred Fifteen

manufacturer & of required shade on ceiling and sloping surfaces to give an even shade, and Paisa Twelve Only

over & including a primary coat with alkali resistance primer of approved brand after

thoroughly brushing the surface free from mortar dropping & other foreign matter & also

including preparing the surface even & smooth by white cement base putty finishing.

36 Distempering (three coats) with oil bound washable distemper of approved brand & 4033.35 Sqm 106.85 Rupees One Hundred Six

manufacturer & of required shade on wall surfaces to give an even shade, over & including and Paisa Eighty Five Only

a primary coat with alkali resistance primer of approved brand after thoroughly brushing

the surface free from mortar dropping & other foreign matter & also including preparing the

surface even & smooth by white cement base putty finishing.

37 Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over 2786.00 Sqm 153.35 Rupees One Hundred Fifty

and above applying one coat of primer to give an required shape even shade after Three and Paisa Thirty Five

throughly Brushing This surface to remove all Dirt and remains of loose poweder material Only

etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather

Emulsion Only Paint and primer shall be as per approved make list of GSPHCL

38 Providing and fixing PVC False ceilling consisting of 600mm x 600mm, 3mm thick PVC 18.00 Sqm 300.12 Rupees Three Hundred and

Sheet used as panel insert in a frame work made using anodized alluminium "T" section of Paisa Twelve Only

sizes 25mm x 25mm, 19 gauge or 1mm thick in squre pattern of Grid sizes of 600 x

600mm. The alluminium frameworks is supported from the ceilling with the help of G.I.

hook and G.I. wire 6mm M.S. reds of required sizes to maintain proper level etc. The

alluminium framework is supported on side wall with the use of alluminium "L" section of

size 25 x 25mm angles etc. complete as per direction of Engineer-in-Charge.(a) PVC Plain

Colour False Ceilling with rid type with allu. Frame

39 Removing and refixing after repairing door,window,cup board,ventilator shutter & repair 25.00 Sqm 321.78 Rupees Three Hundred

frame with providing necessary wood corner M.S. plate support,hinges etc.complete. Twenty One and Paisa

Seventy Eight Only

40 Providing and fixing precast R.C.C. Frame with Cover MD 10 Ton ( Rubber Mould 10.00 Nos 1702.00 Rupees One Thousand Seven

Finished ) inner size 600x450 mm with All Necessary fittings. Hundred Two Only

41 Construction Of Concrete Road Using Trimix System Having of any Thickness M-300 49.00 Cum 4618.15 Rupees Four Thousand Six

Concrete Mix With Providing And Fixing & Removing Of "C" Channel Having Size 75Mm. Hundred Eighteen and Paisa

X75Mm As Per Required Level Slope And Thickness Of Concrete Road Floor Levelling Of Fifteen Only

Place Concrete With Surface Vibrator Machine,Dewatering System Device Finishing With

Power Floater Machine And Trowel Light Brooming On The Surface As Directed With

Providing Expansion Joint Size 20 X 190Mm. Using Of Concrete Cutter Machine Including

Curing Etc. Complete.

42 Providing Groove cutting in C.C. Road incluing cleaning etc.complete as per direction of 112.00 Rmt 36.80 Rupees Thirty Six and Paisa

Engineer incharge Eighty Only

43 Providing and fixing 25 mm diameter backup rod having minimum density 22 kg per cum 53.00 Rmt 17.62 Rupees Seventeen and Paisa

(ASTMD - 3575) & compression strength of 0.40 kg per sqm (ASTM 5249) and finishing Sixty Two Only

with polysulphide sealant etc. complete. For 20 mm wide expansion joint

Total Civil (A) =

(B) ELECTRICAL WORK:

44 [a] Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper 240.00 Point 374.00 Rupees Three Hundred

PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for Seventy Four Only

earth continuity in existing pipe erected concealed in wall/ceiling complete with

approved make 5/6 Amp. ISI make modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic / PVC / Acrylic box covered with appropriate front plate

modules erected on the wall / ceiling with necessary modular lamp holder / modular ceiling

rose / HD Connector (make & model approved by EIC and matching colur with switches

accessories) as directed for Open wiring. Light point. Cat.-II [conductor resistance should

be as per IS:8130/1984]

44 [b] For Bell Point Cat II (in existing conceled pipe) 18.00 Point 374.00 Rupees Three Hundred

Seventy Four Only

44 [c] For Fan Point with 6A Modular type switch and hum free EME step type electronic fan 54.00 Point 536.00 Rupees Five Hundred Thirty

regulator Cat.-II (in existing conceled pipe) Six Only

44 [d] For Separate Point (with 5 pin socket & switch 6 Amp.) Cat.-II (in existing conceled 60.00 Point 405.00 Rupees Four Hundred Five

44 [e] For Loop on switch board (with 5 pin socket & switch 6 Amp.) Cat.-II 130.00 Point 234.00 Rupees Two Hundred Thirty

45 [a] Providing and erecting Point wiring with approved ISI mark 1.5 mm2 copper FRLS PVC 4.00 Point 425.00 Rupees Four Hundred Twenty Five Only

insulated wire with 1.5 mm2 copper FRLS PVC insulated wire for earth continuity in white

Colour rigid PVC pips ISI marked and FIA approved medium class and 20 mm. dia. With

PVC fitting fixed with adhesive solution complete with 5 Amp. ISI make white shock proof

tissino type accessories erected on polished wooden block covered with 3 mm. thick white

ISI laminated sheet with necessary Lamp holder/ceiling rose / H.D. Connector (make &

model approved by EIC and matching colur with switches accessories) as directed. For

Open Wiring (a) For Light Point Cat II

[Length of point wiring must not increase than 10 mtr. For that necessary switch board and

their location must be finalised before execution by agency otherwise payment will not be

done for extra long point. For future extention, if required, agency has to erect one higher

size box as per instruction of EIC] [conductor resistance should be as per IS:8130/1984]

45 [b] For Fan Point with 6A Modular type switch and hum free EME step type electronic fan 1.00 Point 612.00 Rupees Six Hundred Twelve Only

regulator Cat.-II

46 Providing and erecting Medium Class FIA approved and ISI mark white colour 200.00 Mtr. 24.00 Rupees Twenty Four Only

(embossed) RIGID PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along

with continuous fish wire to draw mains with necessary fittings and junction boxes for

following dia. (a) 20 mm. dia.

47 Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 200.00 Mtr. 31.00 Rupees Thirty One Only

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS

with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint &

erected on wall / ceiling of following size . (a) 20 mm dia.

48 [a] Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with 800.00 Mtr. 46.00 Rupees Fourty Six Only

erected in existing pipe erected concealed in wall/ceiling complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (for point wiring and Lighting SB

mains) [Wire must be having box packing] [conductor resistance should be as per

48 [b] 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS 200.00 Mtr. 120.00 Rupees One Hundred

copper multi stranded conductor for earthing as per standard colour code erected in Twenty Only

existing pipe erected concealed in wall/ceiling complete. (for MCBDB mains) [Wire

must be having box packing] [conductor resistance should be as per IS:8130/1984]

49 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with 100.00 Mtr. 30.95 Rupees Thirty and Paisa

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Ninety Five Only

50 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 54.00 Each 535.00 Rupees Five Hundred Thirty

2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated Five Only

FRLS wire for earth continuity in existing pipe erected concealed in wall/ceiling

complete with 16 Amp. Modular type Swich and accessories mounted in 20 G.

G.I.company fabricated metallic / PVC / Acrylic box covered with appropriate front plate

modules erected on the wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly both having ISI mark. Cat.-II

(Necessary sheet / tape / polythene / sand must be erected or filled in all box To Prevent

Mortor Going In To The Box) [conductor resistance should be as per IS:8130/1984]

51 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 18.00 Each 676.00 Rupees Six Hundred

4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated Seventy Six Only

FRLS wire for earth continuity in existing pipe erected concealed in wall/ceiling

complete with16 Amp Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic / PVC / Acrylic box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp. Indicator switch & 1 No. 6/16 A universal

socket white colour suitable for 3 pin top duly both having ISI mark. (Necessary sheet /

tape / polythene / sand must be erected or filled in all box To Prevent Mortor Going In To

The Box) (AC point) Cat.-II. (Conductor resistance should be as per IS:8130/1984)

52 Providing & Erecting 2.0 mtr. long Earthing system by making minimum bore of 225 mm 5.00 Each 7025.00 Rupees Seven Thousand

dia. in soft soil. Suitable for doing pipe-in-pipe technology earthing. Earthing electric rod Twenty Five Only

must be made from Corrosion free hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI mark of Reputed

Brand, Inner pipe: - 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand. Terminal

Size: 70 mm X 100 mm length, Terminal should be made from inner pipe for that pipe

must be pressed and gave rectangular shape so its work as a terminal. The hot deep

galvanising must be done after above process. Galvanised thickness must be minimum

micron anywhere. SS Nut bolt:- 2 nos. with washer suitable for 14 mm dia. hole must be

provided at terminal. Total minimum Weight (approx.) of earth electrode with inside

conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long

time. Back Filling Compound weight is 50 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X

mm depth and Cover should be heavy duty cast iron with required size of 300 mm X

mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Approved Make:- Sulah safe solution, Ashlok, Galexy, Indelec, Yansi earthlid} (Strictly

subject to item specification only) OEM has to submit all detail & sample for approved

before supplying

Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for

one year. Earthing must be done in the presence of A.E. (GSPHCL)

53 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft 5.00 Each 276.00 Rupees Two Hundred

soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Seventy Six Only

54 Providing & erecting following shock proof tissino type accessories erected on G.I.metal 18.00 Each 31.00 Rupees Thirty One Only

box covered with 3 mm. thick white ISI mark laminated sheet. TV antenna socket

55 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of 2.00 Each 370.00 Rupees Three Hundred

wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall Seventy Only

be made from Aluminum exttusion having enough strength (Sample must be approved by

EIC) With Polycarbonate diffuser With Following Specification

(1) Company Mark/Name on the Fitting

(2) Rated input voltage and frequency 220V to 240 VAC, 50Hz

(3) Rated input wattage max 24 W

(4) Rated input current ; 0.2 Amp.

(5) Power Factor : Min.0.90

(6) ATHD : Max. 15%

(7) Rated Luminous flux : Min. 2420 lm

(9) CRI : Min/ 80 Ra

(10) Driver Effciency : min. 80%

(11) LED life span : Min. 50000 Hrs @ L70

(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.

(13) Surge Protection : Min.2 KV

(14) IP rating : IP

(15) IK rating : IK

(16) Short circuit, Open Circuit & Reverse Polarity must be provided

(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall

(18) 3 core copper wire of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the manufacturer has to submit 4 yrs free

replacement Guarantee for complete Fixture) Approval will be given strictly subject to item

56 Providing and erecting Poly carbonate body surface mounting LED Bulk head type 9 watt 1.00 Each 780.00 Rupees Seven Hundred

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen Eighty Only

output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000

to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

57 Providing and Erecting Approved make ISI mark ELCB confirming to IS:12640/1988 3.00 Each 1611.00 Rupees One Thousand Six

having serial number printed on it and having sensitivity of 30 mA and breaking capacity of Hundred Eleven Only

10 KA and suitable for 240 V, 50 Hz having characteristic of quick acting & Tripping with

all advance feature & do not incorporate any electronic component (mounted in box)

Suitable for operation on single phase 240 Volt max rating of (i) For 25 Amp. DP

58 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 18.00 Each 4906.00 Rupees Four Thousand

relevant indian standards ammended upto date. Nine Hundred Six Only

Supplying and fixing following way single phase MCB distrubution board of company

fabricated sheet box with powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB Door, Back side and Body of

MCBDB must be made of 1.2 mm thick CRCA Sheet. Manufacturer must be provided (1)

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank

Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire

box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 12 Way MCBDB:

Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), 1 no.

MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having breaking

capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate

on 240 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp: 2 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per site requirement

and instructions given by EIC on site. Font / number size given by EIC on site as per

59 Providing & erecting 240 V MCB Double pole switch for Lighting load (c curve) having 26.00 Each 327.00 Rupees Three Hundred Twenty Seven8502.00

10 KA breaking capacity & confirms to IS:8828 with same company metal box with

earthing terminal having following capacity with necessary numbering / marking with oil

Paint by painter. For 40 Amp. DP

60 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. 6.00 Each 111.00 Rupees One Hundred

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be Eleven Only

erected in existing box. confirming to IS 8828/1996 with ISI Mark.

61 Supplying & fixing box for housing ELCB + MCB combination made of 18 SWG sheet 26.00 Each 272.00 Rupees Two Hundred

steel duly powder coated with gasket, dust & vermin proof bakelite shield two earthing Seventy Two Only

terminals for following type of RCCB, ELCB, ELCB + MCB. For [a] For 2 pole

62 [a] Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 100.00 Mtr. 56.00 Rupees Fifty Six Only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. [g] One wire 6.00 sq. mm

62 [b] One wire 16.00 sq. mm 100.00 Mtr. 141.00 Rupees One Hundred

Fourty One Only

63 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all 550.00 Point 1.00 Rupees One Only

types along with accessories etc. complete and handed over to dept.

64 Dismantling the existing switchgears, DB and Busbar of any size complete with / without 18.00 Each 7.00 Rupees Seven Only

board or angle iron frame.

65 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with 55.00 Each 9.00 Rupees Nine Only

accessories, G.I. down rod, frame etc. and making the site clear.

66 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 30.00 Mtr. 275.00 Rupees Two Hundred

chloride rigid material with ignition free & flame proof confirming BS .All necessary Seventy Five Only

accessories and measuring of following sizes. [1] 75 mm x 50 mm trunking (MK / LK

67 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with grooving as directed 2500.00 Sq. 3.00 Rupees Three Only

68 Supplying and erecting Approved make MEM type TPIC switch and fuse With neutral link 1.00 Each 2150.00 Rupees Two Thousand One

415 / 500 Volt and confirming to ISS erected on existing wooden block/A.I.Frame with Hundred Fifty Only

necessary Numbering with oil paint by Painter. For 63 Amp. Cat II

Total Electrical (B) =

Total Amount (A+B) =

Total Amount (A+B) =

I/c Executive Engineer

Signature of the contractor. G.S.Police.Housing Corp.Ltd.