ADDN/ALTN TO CERTAIN OFFICERS MD ACCN AT DEHRADUN

Amount

Taking down chowkat with shutter (without taking off shutter from the frame) any description n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed.

S&F Pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and frame filled with and including PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F Pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and frame filled with and including PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed .

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.

S&F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick flush shutters one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long with stainless steel grill consisting of 12 mm square bar & 40 x 5 mm thick SS flat all around incl making good of existing surfaces with plaster and external (cement base paint)/ internal (OBD) finishes complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 200 mm long 1st class, solid in one piece stainless steel barrel tower bolts 204 grade complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, cast D type 204 grade, fixed in stainless steel screws complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws,complete all as specified and directed.

S&F 300mm long stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and ditected.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F in repairs of aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

S&F 18 mm thick WPC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F 18 mm thick WPC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling old existing board complete all as specified and directed.

S&F Continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.

S&F hasp and staple 75mm safety type, stainless steel type 202 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel complete all as specified and directed.

S&F Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample complete all as specified and directed.

S&F in repairs CP brass Soap dish 6 inches complete all as specified and directed.

S&F in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified and directed.

S&F in repair Glass shelf assembly consisting of 5.5mm thick toughned glass with chromium plated guard and railing size 500x125mm with brass bracket complete all as specified and directed.

S&F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F in repairs brass chromium plated towel ring complete all as specified and directed.

S&F in repairs chromium plated Toilet paper holdercomplete all as specified and directed.

S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

S&F in repairs fancy type size 450 x 600 x 5.00 mm thick or higher size looking mirror fixed to wall with stainless steel nuts, complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB and sink 90cm long with union, complete all as specified and directed.

S&F in repair CP Brass 3 in 1, 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting leg and flanges complete all as specified and directed.

S&F in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories in wash basin for fixing hot and cold water, dcrewed down for 15mm bore GI pipe complete all as specified and directed.

S&F in repair pillar taps, brass, with capstan head, fancy type chromium, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI 'P' or 'S; trap including plastic white seet cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm dia CI 'P' trap of 60cm long complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

S&F in repair vitreous china wash hand basin incl padestal , white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.

S&F in repair CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without fixed with cement morter, complete all as specified.

S&F in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed. Make: Nirali modle Omate or equivalent in Prayag polymer pvt ltd and Blue star- silver shine.

S&F in repairs plate rack 200mm and size 90cmx105cm made out off 1.00 mm thick stainless steel sheet complete all as specified and as directed.

S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample complete all as specified and ditected. (Make-Vista/Prayag/Jaqar or equivalent)

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed .

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc10cm girth complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in levelling course to floors complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed.

All as per item No. 64 above but as in skirting/dado fixed over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick fixed over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone agg in floor,bedding layer over roof slab laid in alternate bays, etc and finished the top surface of concete by brooming complete all as specified and directed.

M&L for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed.

M&L for RCC (Nominal mix) 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, including demolition of exiting reinforced cement concrete complete all as specified and directed.

M&L for form work to RCC Slab any descriptin such as kitchen slab,roof, chajja,floor etc.complete all as specified and directed

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F granite 16-18mm thick of any type ( table rubbed and polished in cooking platform, steps, jambs pillars, window cill, and like in cement mortar 1:4 incl pointing in white cement including demolition of existing stone complete all as specified and ditected.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in shed haunching,cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM ( 1:6 ) complete all as specified and as directed .

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick, built in CM ( 1:4 ) complete all as specified and as directed .

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and as directed .

M&L for rendering 10mm thick with CM (1:3) on or concrete surfaces finished even and smooth as in ceiling complete all as specified and as directed.

M&L for complete removal of old existing treatment of internal or external surfaces of wall complete all as specified and directed.

M&L for applying interior grade wall care putty 1mm thick to make the surface smooth complete all as specified and directed.

M&L for applying two coats oil bound distemper by roller any tint over a coat of primer on prepared/puttied surface of walls complete all as specified and directed.

M&L for complete removal of old existing treatment on ceiling complete all as specified and directed .

M&L for preparing surfaces of ceiling and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1mm thick to make the surface smooth complete all as specified and directed.

M&L for preparation of old/new decorated surfaces and applying two coats of weather proof any colour external finish on wall/chajja, roof, facia (projected portion) complete all as specified and directed.

M&L for preparation of new/previously untreated surfaces of wood over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down AC/Salt glazed ware pipes and fittings upto 110mm complete all as specified.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in floor etc complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in floor etc complete all as specified and directed.

S&F PVC (SWR) 110 mm dia, bend with oval acess door, T' socket reducer etc complete all as specified and directed.

S&F PVC (SWR) 75 mm dia, bend with oval acess door, T' socket reducer etc , complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe grouted in PCC 1:2:4 type B-0 complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe grouted in PCC 1:2:4 type B-0 complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge complete all as specified and directed.

S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvantume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws complete all as specified and directed.

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F Steel work in tubular trusses/purlin including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to S. 1161-1979 grade St-240 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfacescomplete all as specified and directed.

M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath similarly use the following specification for sunken floor: (a) Clean the complete surfaces including rubbish for sunken and washing down with water. (b) Plaster for sunken portion in CM (1:3) with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (c) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (d) Supply & laying APP based polymeric water proofing memberane 3 mm thick of weight not less than 3.60 Kg/ Sqm. (e) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (f) PCC 1:5:10 with brick bats 40 mm size. (g) 40mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) finish even and smooth.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Machine cut kota stone as in skirting 16-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing fixed over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

One light/fan/bell point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.110 above but wiring with stranded copper conductor 4 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F replacement fan regulator modular step type 120W 240 volts 2 module type complete.

S & F in replacement Modular switch single pole one way 6 Amp complete all as specified and directed.

S & F in replacement Modular switch single pole one way 16 Amp complete all as specified and directed.

S & F in replacement Modular socket outlet 2/3 pin combined 6 Amp 240 volts complete all as specified and directed.

S & F in replacement Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as specified and directed.

S & F in replacement Modular bell push flush type, 5 Amps complete all as specified and directed.

S & F in replacement Electric ding dong bell 230 volts AC complete all as specified and directed.

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as specified and directed.

Taking down the existing Energy meters carefully and proper noted down the qtr No Meter No and reading with date and kept in safe custody for re-fixing at site after compltion of bldg work complete all as specified and directed.

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4 Sqmm + 1 x 4 sqmm

S & F 4 Way distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacity fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and combination of SP/TP MCBs as outgoings including taking down old unsv MCCB DB,s complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

S & F in replacement MCCB,100 Amps with rupturing capacity 16 KA, 4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting complete all as specified and directed

S & F in replacement MCB 240 volts 'B' Curve 10 KA including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp 240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed

S & F in replacement SPN MCB DB, 8 way sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in replacement Exhaust fan 300 mm sweep, 900 RPM, made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) type B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store without any extra cost. (Test certificate of fan to be submitted)

S&F in replacement exhaust fan, steel body AC single Phase. 230V of size 300m, 900 RPM complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) type B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store without any extra cost. (Test certificate of fan to be submitted)

S&F BLDC Ceiling Fan complete with electronic type regulator and remote accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed.

S&F in replacement high prssure die cast alluminium LED Batten light fitting 20W, 125 lumens /watt, IP-20, colour temp not less than 6500, inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV complete all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

S&F Electric Chimney of size 90 cm, Cap 1500 M3/ hr with autoclean property and all necessary minor items which is required to installation,12 years warranty on motor complete all as specified and directed.

S&F electric water heater (INSTANTANEOUS ELECTRIC HEATING), storage type steel body with EPAC coated steel inner tank having minimum 8 kg /cm2 pressure bearing capacigty and heating element capacity 3 ltrs, BEE 5 star rated with all accessories such as safety valve , thermostate, NRV connection piece etc complete all as specified and directed.

S&F decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watt LED bulb complete all as specified and directed.

S&F in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for earthing complete with galvanized iron earth plate electrode 600mmx 600mmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc. GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

Supply, laying and testing XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 50 sqmm 3.5 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unseviceable LT Cable for laying of cable complete all as specified and directed.

M&L for sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed. (Punned thickness will be measured)

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed.

M&L for 40mm dia GI tubing medium grade (ISI marked) with all fitting/acessories for protection of cable on pole/wall and under road crossing including clamps, nut bolt etc complete all as specified and directed.

Pragati Enterprises (BID ID -3490646)

VERDHMAN ASSOCIATES (BID ID -3488352)