Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹16.9 L+₹10,985 (0.65%)Rejected-Finance ITTIKUNNATH X 386 KOREPARAMBIL ROAD NJARACKAL ERNAKULAM 682505 | ERNAKULAM | ERNAKULAM | KERALA | 682505 | L2 | Rejected-Finance Other than Lowest Tenderer | |
| 3 | L3₹19.2 L+₹2.4 L (14.0%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | General Engineering and Constructions L1 | SOORYA ASSOCIATES L3 | HIGH TECH ENGINEERS AND CO L2 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises all as specified and directed. | 300 | Sqm | 50 ₹15,000 | 70 ₹21,000 | 25 ₹7,500 Lowest |
| 2.00 | Material and Labour for light shade vitrified ceramic tiles 7-8 mm thick polished area of each tiles exc 0.36 sqm but n. exc 0.42 sqm, of any shade and any pattern (Pattern consists combination of two or more tiles) as in floor etc jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 15mm thick screed bed in CM 1:6, all as specified and as directed. (The Colour, shade and pattern shall be approved by the GE before execution of work). (No extra cost shall be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work) all as specified and as directed. | 175 | Sqm | 1,100 ₹1,92,500 | 970 ₹1,69,750 Lowest | 1,000 ₹1,75,000 |
| 3.00 | Material and Labour for Non-skid coloured ceramic tiles of any shade and any pattern (Pattern consists combination of two or more tiles as directed by Engr-in-Charge ) exceeding 0.06 sqm but not exceeding 0.11 sqm 7 to 8-10mm thick, over and including 15mm thick screed bed in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, all as specified and as directed. (The Colour, shade and pattern shall be approved by the GE during execution work. No extra cost shall be allowed for Removing, re-fixing and necessary cutting of door and allied works if any required during execution of work) | 75 | Sqm | 1,100 ₹82,500 | 980 ₹73,500 Lowest | 1,050 ₹78,750 |
| 4.00 | Material and Labour for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. | 50 | Sqm | 1,100 ₹55,000 | 1,050 ₹52,500 Lowest | 1,100 ₹55,000 |
| 5.00 | Dismantling of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc all as specified and directed. | 0.5 | 10 Sqm | 5,000 ₹2,500 | 2,000 ₹1,000 | 500 ₹250 Lowest |
| 6.00 | Material and Labour for granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other platforms and like in over and including 10mm thick backing coat in CM 1:4 complete all as specified. including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite( including moulding ect) including rounding and moulding etc complete all as specified and directed. | 5 | Sqm | 5,000 ₹25,000 | 3,100 ₹15,500 Lowest | 4,000 ₹20,000 |
| 7.00 | Taking down chowkhat/frame without taking off shutter from the frame n.exc 1.50 Sqm each including complete accessories of any type all as specified and directed | 25 | Each | 150 ₹3,750 Lowest | 250 ₹6,250 | 150 ₹3,750 Lowest |
| 8.00 | Taking down chowkhat /frame without taking off shutter from the frame exc 1.50 Sqm and n.exc 4 Sqm each including complete accessories of any type all as specified and directed | 20 | Each | 150 ₹3,000 Lowest | 300 ₹6,000 | 175 ₹3,500 |
| 9.00 | Supply and fix powder coated aluminium frame for doors/windows/ventilators minimum thickness of powder coating is 50 microns with one or more rebates etc as in windows/ ventilators including necessary joining cleat, glazing clips, rubber neoprene packing, complete all as specified and directed.
Note: Glass shall be paid separately under relevant items. | 120 | Kg | 500 ₹60,000 Lowest | 990 ₹1,18,800 | 675 ₹81,000 |
| 10.00 | Supply and fix powder coated aluminium window and ventilator shutters door shutter, side hung type without sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc complete all as specified and directed.
Note: Glass shall be paid separately under relevant items. | 35 | Sqm | 1,500 ₹52,500 Lowest | 3,800 ₹1,33,000 | 4,100 ₹1,43,500 |
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
27 Oct 2025, 6:00 pmClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIRS TO ROOF, PLASTER, JOINERY, WALL, FLOOR, FALSE CEILING AND CONNECTED WORKS AT CERTAIN MD ACCN AT INS DRONACHARYA UNDER GE FORT KOCHI
2025_MES_733913_1
8271/E8_GE_FORT_KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹39,000
Yes
5 Dec 2025
6 Oct 2025
3 Nov 2025
6 Oct 2025
27 Oct 2025
20 Oct 2025
Amount
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises all as specified and directed.
Material and Labour for light shade vitrified ceramic tiles 7-8 mm thick polished area of each tiles exc 0.36 sqm but n. exc 0.42 sqm, of any shade and any pattern (Pattern consists combination of two or more tiles) as in floor etc jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 15mm thick screed bed in CM 1:6, all as specified and as directed. (The Colour, shade and pattern shall be approved by the GE before execution of work). (No extra cost shall be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work) all as specified and as directed.
Material and Labour for Non-skid coloured ceramic tiles of any shade and any pattern (Pattern consists combination of two or more tiles as directed by Engr-in-Charge ) exceeding 0.06 sqm but not exceeding 0.11 sqm 7 to 8-10mm thick, over and including 15mm thick screed bed in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, all as specified and as directed. (The Colour, shade and pattern shall be approved by the GE during execution work. No extra cost shall be allowed for Removing, re-fixing and necessary cutting of door and allied works if any required during execution of work)
Material and Labour for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Dismantling of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc all as specified and directed.
Material and Labour for granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other platforms and like in over and including 10mm thick backing coat in CM 1:4 complete all as specified. including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite( including moulding ect) including rounding and moulding etc complete all as specified and directed.
Taking down chowkhat/frame without taking off shutter from the frame n.exc 1.50 Sqm each including complete accessories of any type all as specified and directed
Taking down chowkhat /frame without taking off shutter from the frame exc 1.50 Sqm and n.exc 4 Sqm each including complete accessories of any type all as specified and directed
Supply and fix powder coated aluminium frame for doors/windows/ventilators minimum thickness of powder coating is 50 microns with one or more rebates etc as in windows/ ventilators including necessary joining cleat, glazing clips, rubber neoprene packing, complete all as specified and directed. Note: Glass shall be paid separately under relevant items.
Supply and fix powder coated aluminium window and ventilator shutters door shutter, side hung type without sash bars aluminium section of weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, handle 2 Nos in doors, hinges 01 No per shutter of windows, snap beading etc complete all as specified and directed. Note: Glass shall be paid separately under relevant items.
Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos and 03 nos of hinges in each door, hinges, powder coated aluminum snap beading screws etc. complete all as specified and directed.
Supply and fix in repairs pre-laminated particle board 12 mm thick, interior grade, pre-laminated both sides with decorative choice lamination fixed with rubber beading and suitable adhesive as in aluminium door shutter etc complete all as specified and as directed.
Supply and fix 4.80 mm thick sheet tinted glass ordinary quality and glazing with aluminium clip square exc 0.5 sqm in each pane, all as specified and directed.
Supply and fix in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.
Taking down shutter of any description, n.exc. 1Sqm each and removing from site all as specified and directed.
Taking down shutter of any description, exceeding. 1 sqm and not exceeding 2 sqm each and removing from site all as specified and directed.
Supply and fix second class hard wood plain solid straight chowkhats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc complete, all as specified and directed.
Supply and fix 30 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted complete, all as specified and directed.
Supply and fix 35 mm thick II class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.28 (a) sizes of members of shutters all as specified and directed.
Taking down PVC/FRP door shutter of any description with frame n.exc 2 Sqm each, all specified and directed.
Supply and fix solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together the solvent cement supplying & fixing in the frame at site as per specification and drawings complete, all as specified and directed.
Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old un serviceable one, all as specified and directed.
Supply and fix 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed.
Supply and fix 75 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed.
Supply and fix 100 mm long aluminium anodised barrel tower bolt all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolt all as specified and as directed.
Supply and fix 150 mm long aluminium handle fabricated type anodised all as specified and as directed.
Supply and fix 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified and directed.
Supply and fix 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified and directed.
Material and Labour for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified and directed.
Supply and fix in repairs 100 mm size mild steel body Mortice lock, vertical type, with 4 liver, fixed to aluminium door complete, all as specified and directed.
Supply and fix in repairs 4 mm thick glass sheet ordinary quality and glazing with oil putty in sqm n.exc 0.50 sqm in each pane complete, all as specified and directed.
Supply and fix in repairs 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete, all as specified and directed.
Supply and fix in repairs Door closer hydraulically regulated, designation No. 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium cast body, all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, all as specified and directed.
Providing and fixing false ceiling at all heights with URG(Glass fibre reinforced gypsum) false ceiling tiles of size 595x595mm ,9mm thick of approved texture design and patterns having moisture content less than 2% humidity resistance of 99% NRCO 0.50 to 0.75 as per IS 8225:1989, Non-combustible as per BS 476(Part 4) 1970 and light reflectance of 85%(minimum) to be laid in three horizontal level suspended on cater locking metal T-Grid of hat dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 gms per sqm including both sides, comprising of main T-runner of size 15x32mm of length 3000mmGross -T of size 15mmx 32 mm of length 1200mm and secondary intermediate Gross T size 15mmx 32 mm of length 600mm from grid module of size 600x600mm suspended from ceiling using galvanised mild steel items(galvanising @80gmperSqm) ie. 50mm long 8mm counter diameter M-6 dash fasteners, 6mm dia fully threaded hangers rod up to 1000mm length and L-Shaped level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partitions with the help of plastic Rawal plug at 450mm c/c and 40mm long dry wall wood screws. The work shall be carried out as per specifications and as directed. With 9mm thick semi perforated micro regular edged GRG false ceiling tiles, all as specified and directed.
Dismantling of Plain or corrugated steel any gauge, thickness, including Nainital or similar pattern roof covering, all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc. complete all as specified and directed.
Material and Labour for pre-cast cement concrete block masonry with solid blocks, 10 cm thick and setting in CM 1:6 type C1 1:3:6 (20 mm graded aggregate), all specified and directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, and removal of debris out of side MD land all specified and directed.
Material and Labour for plastering 10mm thick in CM 1:6 on brick or stone walls or other than fair faces of brick work to be finished even and smooth (without using extra lime or cement) all as specified and directed .
Material and Labour for cement plaster 10mm thick in CM 1:3 on concrete surface as on ceiling finished even and smooth without using extra cement complete all as specified and directed.
Material and Labour for preparation of new plastered/concrete surfaces of walls, providing 3mm thick Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatible priming paint complete all as specified and directed.
Material and Labour for preparation of new ceiling surfaces including washing, and applying two coats of oil distemper emulsion over a coat of primer on ceiling surfaces complete all as specified and directed.
Supply and fix pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 NPA) pre painted with aluminium (55%) and zinc (45%) alloy coating applied through continuous hot dip process having total coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete accessories as per manufacturer's instructions through specialist agency and as per profile and shade as approved by GE.
Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 NPA) pre painted with aluminium (55%) and zinc (45%) alloy coating applied through continuous hot dip process having total coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete accessories as per manufacturer's instructions through, all as specified and directed.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, all as specified and as directed.
Supply and fix mild steel 25x3mm MS Flat for holdfast, cleat etc. for door frame etc. conforming to Fe-410-0 or Fe-310, all as specified and directed.
Material and Labour for PCC 1:3:6 type C1 (using 20 mm graded agg.) as in hold fast block including necessary form work complete all as specified and directed.
Taking down existing treatment from the roof including APP Membrane, H P Clay tiles , cement plaster removing the debris off the premises and cleaning the roof complete all as specified and as directed.
Material and Labour for roughening old concrete surface of roof by picking, sweeping clean and washing down with water to remove weak concrete/plaster dust etc. all as specified and as directed
Material and Labour for 25mm thick cement concrete type B0, 1:2:4, average 30mm thick (12.50 mm graded aggregate) as in concrete padding complete all as specified and as directed
Material and Labour for rendering over roof slab with CM 1:3, 10 mm thick mixed with water proofing compound, all as specified and as directed
APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
Supply only integral water proofing compound as per manufacturer’s instructions, all as specified and as directed.
HIGH TECH ENGINEERS AND CO (BID ID -3460039)
SOORYA ASSOCIATES (BID ID -3459655)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
8271Tenderdocu.pdf
Tender Documents • 1.20 MB
BOQ_821750.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .