Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹28.1 L+₹92,100 (3.39%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹30.2 L+₹3.1 L (11.2%)Rejected-Finance | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | natwarsinghdipsingh L1 | M/S Rajendra Constructions L2 | High Tech Consruction L3 |
|---|---|---|---|---|---|---|
| 1.00 | Removal of existing roof treatment consisting of screed bed, tar felts of any description etc, and removal of debris out side MD land complete all as specified as directed by Engineer in Cahrge. | 2,300 | Square Metre | 10 ₹23,000 Lowest | 14 ₹32,200 | 20 ₹46,000 |
| 2.00 | M&L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufacturers' instructions and finishing the surface fair and even complete all as specified as directed by Engineer in Cahrge.
Note:- WPC will be measured & Paid separately | 2,300 | Square Metre | 170 ₹3,91,000 Lowest | 200 ₹4,60,000 | 225 ₹5,17,500 |
| 3.00 | Demolition of existing lime concrete/PCC padding of any thickness and description laid over RCC roof/Chajjas etc, cleaning and washing of roof with water to remove dust etc to receive waterproofing treatment including removal of debris out side MD land complete all as specified as directed by Engineer in Cahrge. | 92 | CUBIC METER | 150 ₹13,800 | 155 ₹14,260 | 100 ₹9,200 Lowest |
| 4.00 | M&L for PCC in roof pading, filling and mass concrete type B1, 1:2:4 (using 12.5 mm graded stone aggregate) complete all as specified as directed by Engineer in Cahrge. | 92 | CUBIC METER | 4,800 ₹4,41,600 Lowest | 5,100 ₹4,69,200 | 5,200 ₹4,78,400 |
| 5.00 | M&L for repairing the edge/corner of Chhaja/roof projection and similar work by removing plaster width/girth exc 200mm but not exc 300mm and making good with 10mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified as directed by Engineer in Cahrge. | 300 | Running Metre | 100 ₹30,000 Lowest | 110 ₹33,000 | 115 ₹34,500 |
| 6.00 | Supply only liquid water proofing compound complete all as specified as directed by Engineer in Cahrge. | 50 | LITER | 200 ₹10,000 | 180 ₹9,000 | 175 ₹8,750 Lowest |
| 7.00 | Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane (mineral finish) reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 150 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified as directed by Engineer in Cahrge. | 2,500 | Square Metre | 400 ₹10,00,000 | 395 ₹9,87,500 | 390 ₹9,75,000 Lowest |
| 8.00 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore pipes complete all as specified as directed by Engineer in Cahrge.
Note:- (i) Any damage during taking up/down of Gl pipes and connections will be replaced with new Gl tubing/connections of same dia.
(ii) Rate will deemed to be included in the quoted rate and no further claim for the same will be entertained by the Govt. | 80 | Running Metre | 20 ₹1,600 | 18 ₹1,440 Lowest | 25 ₹2,000 |
| 9.00 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore pipes complete all as specified and as directed by Engr-in-Charge.
Note:- (i) Any damage during taking up/down of Gl pipes and connections will be replaced with new Gl tubing/connections of same dia.
(ii) Rate will deemed to be includeded in the quoted rate and no further claim for the same wil be entertained by the Govt. | 80 | Running Metre | 25 ₹2,000 Lowest | 30 ₹2,400 | 35 ₹2,800 |
| 10.00 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of 15 or 20mm bore complete all as specified as directed by Engineer in Cahrge. | 200 | Running Metre | 60 ₹12,000 Lowest | 65 ₹13,000 | 68 ₹13,600 |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
24 Oct 2025, 6:00 pmClosed
Lt Col Sumukh Swaroop
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No 1 Jamnagar 361003
ROOF TREATMENT OF CERTAIN BLDG AND SECURITY POSTS AT OUTSIDE LOC UNDER GE (AF) NO 1 AT AT AF STN JAMNAGAR
2025_MES_733613_1
8370/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
JAMNAGAR
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No 1
₹54,000
Yes
12 Dec 2025
3 Oct 2025
25 Oct 2025
3 Oct 2025
24 Oct 2025
17 Oct 2025
Amount
Removal of existing roof treatment consisting of screed bed, tar felts of any description etc, and removal of debris out side MD land complete all as specified as directed by Engineer in Cahrge.
M&L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufacturers' instructions and finishing the surface fair and even complete all as specified as directed by Engineer in Cahrge. Note:- WPC will be measured & Paid separately
Demolition of existing lime concrete/PCC padding of any thickness and description laid over RCC roof/Chajjas etc, cleaning and washing of roof with water to remove dust etc to receive waterproofing treatment including removal of debris out side MD land complete all as specified as directed by Engineer in Cahrge.
M&L for PCC in roof pading, filling and mass concrete type B1, 1:2:4 (using 12.5 mm graded stone aggregate) complete all as specified as directed by Engineer in Cahrge.
M&L for repairing the edge/corner of Chhaja/roof projection and similar work by removing plaster width/girth exc 200mm but not exc 300mm and making good with 10mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified as directed by Engineer in Cahrge.
Supply only liquid water proofing compound complete all as specified as directed by Engineer in Cahrge.
Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane (mineral finish) reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 150 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified as directed by Engineer in Cahrge.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore pipes complete all as specified as directed by Engineer in Cahrge. Note:- (i) Any damage during taking up/down of Gl pipes and connections will be replaced with new Gl tubing/connections of same dia. (ii) Rate will deemed to be included in the quoted rate and no further claim for the same will be entertained by the Govt.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore pipes complete all as specified and as directed by Engr-in-Charge. Note:- (i) Any damage during taking up/down of Gl pipes and connections will be replaced with new Gl tubing/connections of same dia. (ii) Rate will deemed to be includeded in the quoted rate and no further claim for the same wil be entertained by the Govt.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) of 15 or 20mm bore complete all as specified as directed by Engineer in Cahrge.
Disconnecting existing 500 ltr capacity tank, setting aside (or lowering if required) for repairs,cleaning,including all fitting such as connection pieces with Gl tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe etc. and hositing if required reconnecting and re-fixing in position. (cleaning repairing,etc. measured seperately) complete all as specified as directed by Engineer in Cahrge.
Disconnecting existing 1000 ltr capacity tank, setting aside (or lowering if required) for repairs,cleaning,including all fitting such as connection pieces with Gl tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe etc. and hositing if required reconnecting and re-fixing in position. (cleaning repairing,etc.measured seperately) complete all as specified as directed by Engineer in Cahrge.
Cleaning and removing of 1000 lit capacity tank all scale and from mouths of circulating pipes, etc complete all as specified as directed by Engineer in Cahrge.
Cleaning and removing of 500 lit capacity tank all scale and from mouths of circulating pipes, etc complete all as specified as directed by Engineer in Cahrge.
Supply and fix in repair 500 ltr capacity white colour triple llayer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with Gl tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified as directed by Engineer in Cahrge.
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified as directed by Engineer in Cahrge.
M&L for rendering 15 mm thick on surface other than fair face of brick work or concrete surfaces or stone masonry work in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified as directed by Engineer in Cahrge.
M&L Rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) on ceiling complete all as specified as directed by Engineer in Cahrge.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces or stone masonry work in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified as directed by Engineer in Cahrge.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls/ceiling including a coat of cement based wall care putty complete all as specified as directed by Engineer in Cahrge.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified as directed by Engineer in Cahrge.
M&L for preparation of old decorated plastered surfaces of walls and applying two coats of oil bound distemper complete all as as specified as directed by Engineer in Charge.
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of debris to out of MoD land complete all as specified as directed by Engineer in Cahrge.
M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc complete all as specified as directed by Engineer in Cahrge.
M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqm (M-35), without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with grey cement and pigment laid complete all as specified as directed by Engineer in Cahrge.
S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified as directed by Engineer in Cahrge.
S&F in repairs galvanized concertina coil of 1060mm dia made of 0.5mm thick, 19mm wide strip & 2.59 mm dia high tensile wire, 125 Nos of clips, having 56 Nos of circles and covering 8 to 10 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc complete all as specified as directed by Engineer in Cahrge.
M/S Rajendra Constructions (BID ID -3462194)
High Tech Consruction (BID ID -3464405)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_821414.xls
BOQ • 0.63 MB
PS.pdf
Tender Documents • 0.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .