REPAIR TO PCC CHEQUERED INTERLOCKING PATH AND HARD STANDING AT ALHILAL MIL STN

Amount

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed..

M&L 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment in any shape and size (shape as approved bt GE) laid in path, porch, hard standing or flooring etc conforming to IS-15658-2006, M-35 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .

All as per item No. 2 above but except tiles (old reuse).

M&L 80 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment in any shape and size (shape as approved bt GE) laid in path, porch, hard standing or flooring etc conforming to IS-15658-2006, M-40 grade over and including 25 mm thick layer of sand cushioning, complete all as specified and directed .

All as per item No. 2 above but except tiles (old reuse).

M&L sand filling for paver blocks including watering and consolidation complete all as specified and directed.

M&L 25cm x 25 cm x 25mm thick, coloured rubber moulded chequered cement concrete tiles with grey cement and pigment set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L providing and laying at or near ground level factory made kerb stsone of M-25 grade cemenet concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L preparing new or previously untreated surfaces of concrete or brick work of any description otherwise described, not exc 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of cement primer complete all as specified & directed by Engineer-in-charge.

M&L plain cement concrete M-5 (Nominal mix), type E-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc. complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.

M&L 75mm thick PCC 1:3:6 type C-2 (40mm graded crushed stone aggregate) as in sub base of floors/ paver block/ path etc finishing the surface even & rough without using extra cement complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in hard standing finishing even and fair without using extra cement complete all as specified and directed.

Forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt stone etc. well bonded, bedded and solidly hearted, built in cemtn mortar 1:6 complete all as specified and directed.

M&L rendering 15mm thick plaster in cement mortar(1:4) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing, finished even and smooth without suing extra cement complete all as specified and directed.

VIVEKA ENTERPRISES

M/S THAKUR ENTERPRISES