Construction of type IV Qtrs. 8 Nos. for Additional Block (OPDs Adminstrative wing) of Civil Hospital Nadaun Distt. Hamirpur H.P.

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre)to all height, including getting out the excavated soil upto 2.00 km and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Boulder/stone filling hand packed under floors, complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size. excluding the cost of centering and shuttering all work upto plinth level complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size. excluding the cost of centering and shuttering all work upto plinth level complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level with 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size). including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand: six graded stone aggregate, 20 mm (twenty millimetre nominal size) all work up to plinth level including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Back filling behind return wall,abutment wall,r/wall stone boulders of size range 5 cm to 20 cm (Five centimeter to twenty centimeter),in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm (Eighty millimeter) thick C.C. (Cement concrete) paver block of M-30 (Nominal mix M-thirty) grade with approved color design and pattern, complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Making plinth protection 50mm(fifty millimetre) thick of cement concrete 1:3:6 (one cement : Three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimeter) nominal size) upto plinth level with :Cement mortar 1:6 (one cement : six coarse sand) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (Twenty five) design mix to obtain the minimum compressive strength of 20(twenty)N/mm square (Twenty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate four hundred kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government..

Providing and laying in position reinforced cement concrete work M-25 (M-twenty five ) design mix with minimum cement contents not less than @400 Kilogram/Cubic metres (at the rate four hundred kilogram Per Cubic metre) including curing complete excluding cost of centering , shuttering , finishing and reinforced for reinforced concrete work in walls (any thickness) including attached pilasters,,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera. above plinth level upto all floors level including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete work M-25 (M-twenty five ) design mix with minimum cement contents not less than @400 Kilogram/Cubic metres (at the rate four hundred kilogram Per Cubic metre) including curing complete excluding cost of centering , shuttering , finishing and reinforced for reinforced concrete work in beams , suspended floor , roofs having slop upto 15 (fifteen) degree landing , balconies , shelves , Chajjas , lintels , bands , plain window sills , stair cases and spiral stair cases above plinth level upto all floor level including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etcetera. and removal of form work for Columns, piers, abutments, pillars, posts and struts . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etctra. and removal of form work for Stairs, (excluding landings) except spiral staircases including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etcetera. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etcetera. and removal of form work for Shelves (Cast in situ) including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etcetera. and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetre) wide . including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etcetera. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500 (five hundered ) of Sail / TATA Tiscon/ Jindal panthar for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:4 (one cement : Four coarse sand) in superstructure above plinth level up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Extra for forming cavity 5 cm to 11.5 cm (Five Centimeter to Eleven point five centimeter) wide in cavity walls with necessary weep coated M .S. (mild steel) ties 300 mm (Three hundred millimeter) long of 25x3 mm (Twenty five into three millimeter) section at not less than 3 (three) ties per sqm (square meter) as per approved design. complete above plinth level up to all floors level including en

tire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position.1st (first) class Deodar wood. complete up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI (Indian Standard Institute) marked M.S. (Mild Steel) pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm (thirty five millimeter) thick shutters complete up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (Twenty five mllimeter to forty millimeter) thick : Particle Board 12 mm (twelve millimeter) thick Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 (three) layer and graded (medium density) Grade I (one), Type II (two) conforming to IS : 12823 (Indian Standard : Twelve thousand eight hundred twenty three) (exterior grade) 12 mm (Twelve millimeter) thick (HDHMR,Green ply and Action Tesa) complete up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws. 35mm (Thirty five millimetre) thick 1st (First) Class deodar wood. complete up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (Twenty five mllimeter to forty millimeter) thick : Float glass panes 5.5 mm (Five point five millimetre) thick glass (Modi Guard) panes complete up to all floors level including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 35mm (thirty five millimeter) thick First class Deodar wood wire gauge shutters using galvanized M.S. (Mild Steel) wire gauge of average width of aperture 1.4 mm (one point four millimeter) in both directions with wire of dia 0.63 mm(zero point sixty three millimeter),for doors, windows and clerestory windows with hinges and necessary screws: complete all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 300x16mm (three hundred into sixteen millimeter) ISI (Indian Standard Institute) marked bright /matt finished Stainless sliding door bolt of approved quality and make with necessary screws etc all complete. upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 250x16mm (two hundred fifty into Sixteen millimeter) ISI (Indian Standard Institute) marked bright /matt finished Stainless sliding door bolt of approved quality and make with necessary screws etcetera. all complete. upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter) ISI (Indian Standard Institute) marked Providing and fixing bright /matt finished Stainless tower bolt of approved quality and make with necessary screws etcetera all . complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) ISI (Indian Standard Institute) marked Providing and fixing bright /matt finished Stainless tower bolt of approved quality and make with necessary screws etcetera all . complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter) ISI (Indian Standard Institute) marked bright /matt finished Stainless Steel handles of approved quality and make with necessary screws etcetera all complete. upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) ISI (Indian Standard Institute) marked bright /matt finished Stainless Steel handles of approved quality and make with necessary screws etcetera all complete. upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing 40x5 mm (forty into five millimeter) flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm (ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter)1:3:6 mix (one cement : three coarse sand :six graded stone aggregate 20mm (twenty millimeter) nominal size).complete all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing bright finished brass hard drawn hooks and eyes :300mm (three hundred millimeter) complete all floor level inc

luding entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 18 mm (Eigteen millimeter) thick, 150 mm (one hundred fifty milliemter) wide pelmet of coir veneer board ISI (Indian Standard Institute) marked IS : 14842, (Indian Standard: Fourteen Thousand Eight hundred forty two) including top cover of 6 mm coir veneer board, nickle plated M.S. (mild steel) Pipe 20 mm (twenty millimeter) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three millimeter) M.S. (mild steel) Flat 10 cm (ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred into forty into forty millimeter) on both inner side of pelmet and rawl plugs 75 mm (seventy five millimeter) long etc. complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing M.S. (mild steel) (TATA/SAIL/Apollo/JSW Make ) grills of required pattern in frames of windows etcetera with M.S.(mild steel) flats, square or round bars etcetera including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etcetera complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, (Indian standard Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etcetera. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 19 mm (Ninteen millimetre) thick commercial board water proof ISI (Indian Standard Institute) Marked is No 1659 (one thousand six hundred fifty nine) of (UNIPLY / GREEN Ply or its equivalent) shutters for cup boards including fixing with nical plated Piano hings with screws etcetera. complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 19mm (ninteen millimeter) thick Commercial Board in shelve box for cup boards with butt joints and fixing with nails and screws etcetera. complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1.00mm (one millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etcetera complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 6mm ( six millimetre) thick water proof kit ply Greenlam/ century ply of standard quality ISI mark and approved shade and colour in wall linning including mitring at junctions, butt jointing and nails complete complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50 mm (Fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetra. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 50 mm (Fifty millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing aluminium hanging floor door stopper,ISI (Indian standard Institute) marked,anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian Standard one thousand eight hundred sixty eight)) transparent or dyed to required colour and shade, with necessary screws etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing PTMT handles with necessary screws etcetera. complete.125x34x24 mm (one hundred twenty five into thirty four into twenty four millimeter ) weighing not less than 23 gms (twnety three grams) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Kota stone in single piece in tread of steps over 20 mm (twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, t

oll tax, GST or other taxes imposed by the Government

Marble stone flooring in single piece in riser of steps with 18 mm (Eighteen millimeter) thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with :Jaisalmer yellow Marble complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Extra for pre finished moulding nosing in treads of steps of Kota stone/ sand stone slab. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and laying Polished vitrified floor tiles 1200X600 mm (twelve hundred into Six hundred millimeter) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etcetera. , complete at all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and laying Polished Vitrified tiles in sizes 1200X600 mm (twelve hundred into Six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing HDF decorative laminate core board German kerono flooring AC 4 (Four) class 32.7mm (thirty two point seven) millimetre thick placed ocer cushion of 2mm (two millimtre) thick expended polythene foam plus 100 (One hundred) micron thick polythene sheet. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 18 mm (Eighteen millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimeter) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Granite of any colour and shade complete at all levels. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles of size 600x600mm (Six hundred into six hundred millimeter) of 1st quality conforming to IS : 15622 (Indian Standard: fifteen thousand six hundred twenty two) of of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany) in all colours, such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (one Cement : Four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 1st quality ceramic glazed floor tiles size in 1200x600mm (twelve hundred into six hundred millimeter)conforming to IS :15622 (Indian Standard: fifteen thousand six hundred twenty two) (thickness to be specified by the manufacturer ) of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany) in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thickbed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing 0.60 mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.60mm (zero point six zero millimeter) thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia (six millimeter diameter) and prepainted G.I.(galvanized Iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. complete upto floor all level including entire carriage

of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 15cm( fifteen centimeter ) wide 45cm ( forty five centimeter) overall semicircular plain G.I sheet gutter with iron brackets 40x3mm( forty into three millimeter) size bolts and nuts and washers etcetera. including making necessary connections with rain water pipe complete as per design 0.63mm (Zero point six three millimetres) thick sheet as per the direction of Engineer in Charges including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing mild steel BP sheet 1.66mm (one point sixty six millimetre) to 2mm(two millimetre) thick in eaves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separtely including entire carriage of material within all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 110mm (one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand : three hundred eighty two), leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Single socketed pipes 75mm (Seventy five millimetre) diameter of Supreme/ Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing Single Pushfit Coupler 110mm (one hundred ten millimeter) on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes including fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC Bend 110mm dia.(one hundred ten millimeter) on wall faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes i/c fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC Shoe 110mm dia.(one hundred ten millimeter) on wall faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes including fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing unplasticised -PVC (Poly venyl Choloride) pipe clips of approved design to unplasticised PVC (Poly venyl Choloride) rain water pipes by means of 50x50x50 mm (fifty into fity into fifty millimeter) hard wood plugs, screwed with M.S. (mild steel) screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetera. complete.110 mm (one hundred ten millimeter) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing plain multipurpose cement board(Hight pressure steamcured) with suitable screws for cement particle board in ceiling etcetera. complete (frame work to be paid seperatately). complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 3mm (Three millimeter) thick ACP Sheet approved (Aldecko) shade and Over GI frame work fixing with scews Complete with Engineer in-charge (frame work to be measured seprately). including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Structural steel work of (TATA,SAIL or RASHTRIYA ISPAT) riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Steel work in built up tubular (TATA/SAIL/Apollo/JSW Make ) (round, square or rectangular hollow tubes etcetera. ) trusses etcetera. , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etcetera. complete.Hot finished welded type tubes complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and plastering 6mm (Six millimetres) th

ick cement plaster to ceiling in cement mortar 1:3 (One cement into three sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

15 mm (Fifteen Millimeter) cement plaster on rough side of single or half brick wall of mix:1:4 (One cement: Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

20 mm (Twenty Millimeter) cement plaster of mix : 1:4 (One cement: Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete at all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eighty litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninty litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seventy five litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Painting with Satin enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing garsa (Kullu) stone slab 12.5mm (twelve point five millimeter) thick cladding on R.C.C. ( reinforcement cement concrete) surface side as on faces of arch masonry walls etcetera. on 12mm (twelve millimeter) thick cement plaster 1:3 ( one cement : three sand ) and jointed with cement slurry including scaffolding etcetera. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Construction coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm(fifteen into twenty two centimeter) in cement mortar 1:6(one :six) and inside plastering with cement mortar 1:3(one isto three) including earth work and laying 10 cm (ten centimeter)cement concrete in 1:5:10 (one cement :five sand :ten aggregate)of 40 mm(forty millimeter) nominal size and 7.5 cm(seven point five centimeter) cement concrete 1:2:4 (one cement :two approved sand : four graded crushed stone aggregate of 20 mm(twenty millimeter) nominal size ) and finished with a floating coat of neat cement complete as per standard design. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:a)Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: b)laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm (ten centimeter). c) third layer of 1.5 mm (one point five milimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm (one point two hunderd eighty nine kilogram per square meter) mixed with water proofing cement compound @ 0.670 kg/sqm (zero point six hundred seventy kilogram per square meter) and coarse sand @ 1.289 kg/sqm (one point two hunderd eighty nine kilogram per square meter). This will be allowed to air cure for 4 (four) hours followed by water curing for 48(forty eight) hours. The entire treatment will be taken upto 30 cm (thirty centimeter) on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately. complete as per architectural drawings inc

luding carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Excavation tranch of required width of pipes cables etcetera. Pipes, cables etcetera. , not exceeding 80 mm(Eighty millimeter) dia. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal type water closet (European type of CERA, HINDWARE, PARRYWARE, make)) Single unit floor mounted size 670x370x795 (six hundred sevnty into three hundred seventy into seven hundred ninty five) (European type W.C. pan) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever),conforming to IS : 7231 (Indain Standard : Seventy two hundred thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. (Water closet) pan with ISI (Indian standard institute) marked white solid plastic seat and lid complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing wash basin (CERA, Parryware, Hindware, Sanitaryware) with C.I. ((cast iron) brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 510X400 mm (five hundred ten into four hundred millimeter) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing Stainless Steel A ISI (18/8)(Indian standard institute) kitchen sink 1155x515mm (one thousand one hundred fifty five into five hundred fifteen millimeter) bowl depth 250 mm (Two hundred fifty millimeter) as per IS: 13983(Indian standard Thirteen thousand nine hundred eighty three) with C.I. brackets and stainless steel plug 40 mm (forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required : complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C.(water closet) of quality and make ( Jaquare Opal series) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 32mm (thirty two millimeter)dia P.V.C. waste pipe for sink or wash basin (Finolex/ Relpipe (Reliance) / Vectus ) including P.V.C. waste fittings complete. Semi rigid pipe . complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.(chromium plated) brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar / Hindon series of JAL / ESS including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm(one hundred ten millimeter) diameter high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred ten millimeter) diameter PVC Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etcetera. complete upto floor all level including entire carriage of materials within all leads an

d lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred ten millimeter) diameter PVC(Polyvinyl chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC(Polyvinyl chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and Fixing 110mm(one hundred ten millimeter) diameter PVC double equal branch ISI(indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and Fixing 75mm(seventy five millimeter) diameter PVC double equal branch ISI(indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred ten millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door,insertion rubber washer 3mm(three millimeter) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 110mm(one hundred ten millimeter) diameter PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) including fixing with aprooved adhesive etcetera. complete complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 75mm(seventy five millimeter) diameter PVC (Polyvinyl chloride) collars ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) including fixing with aprooved adhesive etcetera. complete complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) approved quality conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing CP Brass Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :110 mm X 75 mm.(one hundred ten into seventy five millimeter) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 600x20mm (Six hundered into twenty millimetres) size CP Brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite and Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 1216 (16mm OD (sixteen millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera. , with clamps at 1.00 (one point zero zero) metre spacing. This includes the costs of cutting chases and including testing of jo

ints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 1620 (20 mm OD (twenty millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 15 mm(fifteen millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20 mm(twenty millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Making connection of G.I(Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Fixing water meter and stop cock in G.I.(Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etcetera. complete ( cost of water meter and stop stop cock to be paid seprately). 200 mm (two hundred millimeter) nominal bore complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20mm (twenty millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 45cm ( fourty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government. Government.

Providing and fixing C. P. Brass overhead shower rose with 15 or 20 mm (fifteen or twenty millimetre) inlet 150mm (one hundred fifty five millimetre) with single flow and shower arm of Continental series of Jaquar / Hindon series of Jal / ESS including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.

Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. (cast iron) surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twenty millimeter) nominal size), including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 15 mm(fifteen millimeter) diameter nominal bore G.I.(galvanised iron) Union in G.I. (galvanised iron)pipe including cutting and threading the pipe and making long screws etc. complete (New work) :complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and fixing 20 mm(twenty millimeter) diameter nominal bore G.I.(galvanised iron) Union in G.I. (galvanised iron)pipe including cutting and threading the pipe and making long screws etcetera. complete (New work) :complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Finolex/Relpipe (Reliance)/Vectus), IS : 12701(indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings a

nd technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib cock of approved quality (Jaquar / Hindon series of Jal / ESS (superior or heavy type) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.