Loading…
Loading…
Tender Value
₹8.4 L
EMD Value
₹8,424
Closing Date
24 Aug 2026, 11:30 amClosed
Executive Engineer, RWS&S Division(N), Ananthapuramu
Ananthapuramu
Providing Borewell, Pumpset and pipeline near (NTR,BC Colony)at Darga, Honnuru village Bommanahal Mandal
976755
5/TO/(21 to 28)/Tenders/e-procurement/2026-27 Dated:- 09/08/2026
OPEN - NCB
Water Supply
ANANTHAPUR
8 documents required · 8 mandatory
₹299
₹8,424
14 Aug 2026
14 Aug 2026
14 Aug 2026
Towards Geologist survey charges
Sinking of filter point with hand auger of shell 250 mm dia in sandy soils, binding plastic mesh to 180 mm dia pvc pipe inserting the same into borewell, Excluding cost of PVC Pipe and including cost and conveyance of all material and labour charges.-Taking out put = 12.00 mts
Supply and fixing of 175 mm dia PVC 6kG/cm2 Blue casing pipe etc. complete.
Labour charges for 175 mm dia PVC 6kG/cm2 pipe for slotted charges.etc.
Supply and erecting, ISI mark submersible 10.0 HP,3 Phase, 10 stages pumpset suitable for 156mm dia borewell with high quality wear resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength.
Provision for 65 mm dia GI B class pipes and including cost and conveyance of all materials and labour charges etc. compleate.in the Bore well over head charges and including contractors profit @13.615%
Provision for 65 mmdia GI 0.60mts Nippal
Provision for 65 mmdia GI 0.90mts Nippal
Provision for 65mmdia GI 1.50 mts Nippal
Provision for 65/90 mmdia PVC Reducer
Provision for 65mmdia GI Couplings
Supply and fixing of 4.0 Sqm Cable wire (Category-1)
Supply and fixing of Control panel board above 7.5 upto 12.5 HP submersible motor
Provision for 65mmdia MS Clampset Inculuding cost and conyance of all material and labour charges etc.,
Provision for 65mmdia CI NRV Inculuding cost and conyance of all material and labour charges etc.,
Provision for 65mmdia GI Bends Inculuding cost and conyance of all material and labour charges etc.,
Supply and fixing of LTAB Banuched cable wire including cost and conveyance of all materials and Labour charges.etc.
Supply and fixing of 6 Sqm Weather proof twin core (WPTC) service wire including cost and conveyance of all materials and Labour charges.etc.
Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2, without bypass upto 400mm dia and with bypass above 400mm dia
Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions
Earth work excavation in OG soils of trench size 0.70x1.00 m with initial lead and lift for laying and jointing of 90mm dia PVC 6kg/cm2 pipes and refilling the trench with excavated soil and bringing the surface to original level and testing the pipe line to required pressure etc. complete
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
D.Honnuru 10.00L.xlsx
TENDER_DOCUMENT • 0.09 MB
VOL 1 Part _Darga Honnur.doc
TENDER_DOCUMENT • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .