Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.3 LAccepted-Finance | 1 | Accepted-Finance L1 | |
| 2 | 2₹5.4 L+₹16,387.39 (3.12%)Accepted-Finance | 2 | Accepted-Finance L2 | |
| 3 | 3₹6.0 L+₹75,800.85 (14.4%)Rejected-Finance | 3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | M S communications L2 | M T JEEVANANDAN L3 | MOHAMMED YASIN P.P. L1 |
|---|---|---|---|---|---|---|
| 1.00 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 100 | sqm | 35 ₹3,500 | 37.41 ₹3,740.74 | 32.7 ₹3,269.62 Lowest |
| 2.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4 | cum | 343 ₹1,372 | 381.3 ₹1,525.21 | 333.28 ₹1,333.12 Lowest |
| 3.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 11 | sqm | 375 ₹4,125 | 409.33 ₹4,502.63 | 357.78 ₹3,935.55 Lowest |
| 4.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4 | cum | 8,900 ₹35,600 | 9,790.13 ₹39,160.51 | 8,557.13 ₹34,228.5 Lowest |
| 5.00 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 4 | cum | 6,150 ₹24,600 | 6,845.17 ₹27,380.69 | 5,983.07 ₹23,932.27 Lowest |
| 6.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 25 | sqm | 352 ₹8,800 | 391.95 ₹9,798.64 | 342.58 ₹8,564.57 Lowest |
| 7.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,105 | kg | 187 ₹2,06,635 | 205.93 ₹2,27,548.45 | 179.99 ₹1,98,890.23 Lowest |
| 8.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 150 | sqm | 806 ₹1,20,900 | 892.67 ₹1,33,900.26 | 780.24 ₹1,17,036.41 Lowest |
| 9.00 | OD30391/2026-2027:Providing coloured PVC gutter using 150mm or nearest (4kgf/cm2) including all cost and conveyance of materials, labour charges for fitting all specials but excluding cost of specials etc. complete. | 20 | metre | 500 ₹10,000 Lowest | 634.74 ₹12,694.77 | 554.8 ₹11,095.95 |
| 10.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 50 | sqm | 155 ₹7,750 | 174.75 ₹8,737.58 | 152.74 ₹7,637.14 Lowest |
Tender Value
₹5.7 L
EMD Value
₹14,195
Closing Date
19 Sept 2026, 6:00 pmClosed
Executive Engineer (Civil)
Office of the Executive Engineer (Civil) Engineering Department University of Calicut Calicut University P O Malappuram District Kerala 673635
Construction of Cloth Washing and Drying Shed for the New Mens Hostel and Extension of Cloth Washing and Drying Shed for the Ladies Hostel at Dr. John Matthai Centre, Thrissur.
2026_UoC_869162_1
D2/613/2026
Open Tender
Civil Works - Others
Item Rate
60 days
Dr.JOHN MATTHAI CENTER
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,481
Yes
₹14,195
Yes
23 Sept 2026
11 Sept 2026
22 Sept 2026
11 Sept 2026
19 Sept 2026
11 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 100 | sqm | - | - |
| 2 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4 | cum | - | - |
| 3 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 11 | sqm | - | - |
| 4 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4 | cum | - | - |
| 5 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 4 | cum | - | - |
| 6 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 25 | sqm | - | - |
| 7 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 1,105 | kg | - | - |
| 8 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 150 | sqm | - | - |
| 9 | OD30391/2026-2027:Providing coloured PVC gutter using 150mm or nearest (4kgf/cm2) including all cost and conveyance of materials, labour charges for fitting all specials but excluding cost of specials etc. complete. | 20 | metre | - | - |
| 10 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 50 | sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1472277.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.64 MB
DECLARATION.pdf
Additional Documents • 0.12 MB
epaymentform.pdf
Additional Documents • 0.01 MB
PreliminaryAgreementFormat.pdf
Additional Documents • 0.24 MB
TENDERDOCJMCCLOTHWASHINGMHANDLH.pdf
Tender Documents • 1.54 MB
BOQ_1472277.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .