Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹59.0 L+₹2.0 L (3.53%)Rejected-AOC | L2 | Rejected-AOC Second Lowest | |
| 3 | L3₹59.7 L+₹2.8 L (4.90%)Rejected-AOC | L3 | Rejected-AOC Third Lowest | |
| 4 | L4₹59.9 L+₹2.9 L (5.09%)Rejected-AOC | L4 | Rejected-AOC Fourth Lowest | |
| 5 | L5₹60.6 L+₹3.6 L (6.31%)Rejected-AOC | L5 | Rejected-AOC Fifth Lowest |
Tender Value
₹69.9 L
EMD Value
₹50,000
Closing Date
10 Nov 2020, 11:00 amClosed
EXECUTIVE ENGINEER KSHB KOTTAYAM DN
EXECUTIVE ENGINEER KSHB KOTTAYAM DN KANJIKUZHY MUTTAMBALAM P O 686004
RENOVATION OF ARCHBISHOP KAVUKATT HALL AT S B COLLEGE CHANGANASSERY
2020_KSHB_395591_1
04/2020-21/HB KTM
Open Tender
Civil Works - Buildings
Item Rate
180 days
CHANGANASSERY
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,950
online
₹50,000
4 Feb 2021
28 Oct 2020
13 Nov 2020
28 Oct 2020
10 Nov 2020
29 Oct 2020
29 Oct 2020 - 9 Nov 2020
Amount
APPENDIX A:ROOFING
15.28.1 : Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet
12.14 : Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement / G.S. sheet gutters with purlins.
od10883/2019_2020 : Providing Galvanized Aluminium Trafford sheet roofing of approved colors and make like TATA having a thickness of .5mm including vertical/curved surface fixed with proper self tapping screws or with J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washer filled with white lead as per the approval of Engineer in charge, excluding the cost of purlin, rafter and trusses and including cutting to size and shape wherever required.
APPENDIX B:CEILING WORKS
12.45.3 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
APPENDIX C:FLOORING
15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
GEORGE THOMAS
satheesh chandra babu
Anish Thomas
Shaji Joseph
M ISMAIL
Bidder Name
M ISMAIL
ALIYAS CHERIAN
satheesh chandra babu
Shaji Joseph
GEORGE THOMAS
Anish Thomas
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_562998.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .