Supplying and providing semi mass light

Amount

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos fixed in existing RCC foundation adn junction box etc, complet 9 Meters

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 175 mm bottom diameter thickness 3mm base plate dimensions of 275x275x16 mm suitable for wind speed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 10 Meters

Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Earth work excavation in ordinary soil and depositing with a lead up to 50 m and lift up to 1.50 m including neat banking ( for foundation earth work 0.60x0.60x1.5m size)

Cement concrete 1:2:4 using 20mm (nominal size) brocken stone for reinforced concrete work (for foundation concrete 0.60x0.60x1.8m size)

Reinforcement for R.C.C works, bend tied and placed in position ( Plain grill requiring bend cold) using for steel (for foundation reinforcement 14m 8mm tor steel)

Plastering with cement mortar 1:4,12mm thick one coat. (for foundation above ground level 0.50x0.50x0.3m size)

Supply and drawing the following sizes of multi-core PVC insulated & PVC sheathed 650/1100 V grade 3 core copper conductor round flexible cables conforming to IS 694 part 1 1960 in the existing surface / reces conduit as required including giving neccessary connections of the following sizes. 1.50 sq. mm

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of 450x300x214 mm or suitable size for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

Fabrication supply, conveyance and installation of angle iron frame work for wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zink chromate primer, bolting the frame to the panel using required bolt and nuts. fixing the whole to the wall, making good the damages etc. as required

S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following rating 32A DP SDF

Supply and fixing the following accessories in the existing meter board and giving connections etc. 32 A fuse holder for BS type blade fuses.

32 A. 415V, 2 way neutral link mounted o DMC/SMC base.

20-25 A, clip-on offset tag fuse link of size fI

Supply and installation of the following accessories suitable for 50Hz, AC supply conforming to IS 8828-1995/ IEC 60898 the following currect rating in the enclosure and giving connections as required 25 A, 2 pole, 30 mA RCCB

6 A to 25 A, 10kA, DP MCB (C curve)

32A, 2pole, AC I rated power contractor with INO+INC auxiliary contract & with Ac coil

24 Hours Timer for operating automatic ON-OFF function

Supply & laying of one numbers PVC insulated and PVC sheathed armoured aluminium power cable of I.IKV grade of the following sizes in the existing RCC/HUME/STONE WARE/GI/DWC pipe as required, 2 core 6 sq mm

Supplying of , laying and jointing of 50/38 sizes of double wall corrugated (dwc ) pipes made out of HDPE conforming to is 14930 part 2 for mechanical protection to underground power cables with all required accessories in ground including excavation of trench to a depth of 75 cm and refilling the trench with excavated soil etc as required (in hard soil)

Supply and clamping 32mm dia of "B" class GI pipe on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc.,

25 mm dia light guagePVC Pipe

supply and provide plate earthing as per IS 3043 with 600*600*6.30 mm GI/CI earth plate,20 mm GI watering pipe fixed to the earth plate with 20*3 mm GI clamps , GI funnel with weld mesh , filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 pcc using 40 mm broken stone (10 cm thick) , brick work in cement mortar 1:6 , plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4,12 mm thick , (the finished inside dimension shell be 300*300*300mm) but excluding test joint , earth continuity conductor to the plate, and covering at the top.

Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required. 300*300*6 mm cast iron gully trap with covering , Supply and providing test joint for the earthing system using 2 nos of the following sizes of strips including cutting and bending to shape , drilling necessary holes and fixed to the wateruing pipe etc as required.

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip ) and fixing firmly with plate test joint etc as required.2x25x3mm strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required. (25x3mmGI strip)

2.65 mm copper conductor (12 SWG)

3.15 mm copper conductor (10swg) (main earth lead)

3.15 mm GI conductor (10 SWG)

Supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required. No 10/12 SWG

Supply and providing the following sizes of bolt and nut with washers on the existing MS box/ earth bus etc. as required including drilling necessary holes as required 25x6 brass GI bolt & nut

Supply and fixing Danger notice board of size, 125 x 75 mm

Supply and wiring with 650/1100 v grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part 1 1990 for interconnecting the control devices / equipments including providing suitable size sockets at the termination points , keepng the wiring firm by suitable tie/ tie mounts / PVC duct etc. as required. 4.00 sq mm single run without sockets .(for terminating kseb meter Board) Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

USHA ELECTRONICS SYSTEMS