Electrical works for the State Central Analytical Laboratory at ERCMPU Campus, Edappally, Ernakulam

SWITCH BOARD,MOTOR CONTROL CENTERS, REMOTE CONTROL PANELS,DISTRIBUTION BOARDS(AS PER SPECIFICATION AND FEEDER DETAILS) Supply of Cubical Type floor mounting Panel fabricated out of 14/16 SWG CRCA sheet duly Powder coated with all inter connections with the following accessories.

Supply of S SB (UPS) PANEL

Distribution Boards + Accessories Supply of the following MCB DB’s double door made out of 16 SWG CRCA sheet, dust and vermin proof wall mounting in vecess/surface consisting of the following A.C. DB – 6 way VDB with 100A 100Ma RCBO -1 No. 40A,32A,25A,16A TP/SP MCB full set poder coated ms encloser

P.D.B– 4way TPN DB with 63A 30Ma RCBO 32A,25A,16A,10A Sp MCB – full Set with powder coated encloser

L.D.B – 8way TPN-DB with 40A 30Ma ELCB+MCB 1 No. 16A,10A, 6 A SP MCB- Full Set with powder coated encloser

UPS-DB – 4way TPN DB with 40A 2P MCB- 1 No., 32A,25A,16A,10A SP MCB – Full Set with powder coated encloser

Supply of the following 63A/40A 5 pin Industrial Socket+ 63A/40A 4P MCB Isolator with powder coated MS enclosure

40A 4 P MCB Isolator with powder coated MS enclosure

100A 4P MCCB with powder coated MS enclosure

63A 4P MCCB with powder coated MS enclosure

SUPPLY OF L.T CABLE ( ALUMINIUM) Supply of 1.1kV PVC / XLPE insulated armoured under ground cables with aluminum / conductor. Type AYFY/YRY/ YY To be laid including excavated trenches. Supply and laying Bricks, Sand refilling excavated trenches/GI Pipes, Hume Pipes, Cable Trays, building surfaces. All as per standard specifications and as approved. 3.5 x 185sq mm Alu. Armoured cable

3.5 x 95sq mm Alu. Armoured cable

3.5 x 70sq mm Alu. Armoured cable

3.5 x 50 sq mm Alu. Armoured cable

3.5 x 35sq mm Alu. Armoured cable

3.5 x 25sq mm Alu. Armoured cable

4 x 16 sq mm Alu. Armoured cable

4 x 10sq mm Alu. Armoured cable

4 x 6sq mm Alu. Armoured cable

Supply of Copper Cables Supply of 1.1kV PVC / XLPE insulated armoured under ground cables with aluminium / copper conductor. Type AYFY/YRY/ YY To be laid including excavated trenches. Bricks, Sand, refilling excavated trenches. All as per standard specifications and as approved. 4x10 sq mm copper Armoured cable

4x6 sq mm copper Armoured cable

4x4 sq mm copper Armoured cable

4x2.5 sq mm copper Armoured cable

SUPPLY of PVC insulated Copper wire through 20 mm/25mm PVC/ flexible pipe with the following s, including Copper Socket,Crimping 25 sqmm wire

16 sqmm wire

10 sqmm wire

6 sqmm wire

4 sqmm wire

Earthing - Supply of Copper Plate Earthing Supply at site all materials and provide plate earthing as per lS 3043 and refilling with coal, salt etc. using 600x600x6mm Copper earth plate 40mm dia 2.5Mtr length Gl watering pipe hardware items for riveting of 25 X 3 mm copper strip including the construction of the earth pit chamber providing chamber cover etc.

Supply of Cast Iron Plate Earthing Supply at site all materials and provide plate earthing as per lS 3043 and refilling with coal, salt etc. using 1200x1200x12.5mm Cast iron plate 40mm dia 2.5Mtr length Gl watering pipe hardware items for riveting of 25 X 3 mm Hot dip GI strip including the construction of the earth pit chamber providing chamber cover etc.

Supply of Pipe earthing Supply of pipe earthing with 3.5 M long X 40mm dia GI earth pipe an dother accessories as per specification and standard code of practice including excavation and refiliing with coal, salft etc.

Supply of the following sizes of copper flats/wires for earthing of isolatiors, switch boards, motor control centers, distirbution boards, Generator etc. and interconnection of earth pits as per technical specification. Earth stirp/ wires to be taken through GI Pipes/ cable tays/ hyme pipes/ built in trecnches/ soil etc. wherever necessary. Rate shall be inclusive of connected civil works, necessary tinning providing sockets and end terminationof coppper strips/ wires with all accessories required for the completion of work. 25x3mm Coper Strips

25x3 mm Hotdip Strip

25x6 Hotdip Strip

No.6 SWG Copper conductor

No.8 SWG Copper conductor

No.10 SWG Copper conductor

Supply of cable Tray and accessories Supply, Fabrication, Erection, installation of structural supports for cable, cable tray and other structural materials, not covered elsewhere in the bill of quantities including one coat of metal primer and two coats of grey paint.

Supply of aluminium perforated cable trays with covers in walls with supporting materials of 300x2mm perforated cable tray with all fixing accessories

Supply of 200x2mm perforated cable tray with all fixing accessories

Supply of good quality rubber mat (1 meterX 2 meter size)

Providing individual 3 phase KWH meter with suitable CTs for the outgoing feeder of Main LT panel excluding capacitor feeder including necessary wiring if insited by Electircal instpectorate .

Supply of MS items for cable tray, racks etc.

Supply of 6mm MS Chequered Plate

Internal Wiring & LT Electrification, Light Point wiring and using Modular Switches. /switch boards Light point wiring with 1.5 sqmm pvc insulated Cu. conductor 650V grade wires and 2.5 sqmm green PVC insulated copper earthwire/ 14SWG copper wire in surface/ concealed PVC conduit system including providing and fixing 1 No. 5A single pole plate/modular type switch in sheet steel box with cover, complete with 1.5 sqmm circuit, for one light point controlled by one switch. The point length will be limited to 10 Mtrs (including circuit wiring and inter connections as required). Supply of 1 No light point controlled by 1 No. 6A SP modular Switch.

Supply of 2 No’s light point controlled by 1 No. 6A SP modular Switch.

Supply and Laying of 3 No’s light point controlled by 1 No. 6A SP modular Switch.

Supply of 1 No Ceiling Fan/Wall Fan/Exhaust Fan point controlled by 1 No. 6A modular SP Switch.

Supply of 1No,6A socket outlet controlled by 1 No 6A SP modular Switch along with the other light switches.

Independent position

Supply of modular type16A Power Plug including circuit wiring Light circuit wiring using 2 runs of 1.5sq mm PVC insulated copper wires along with one run of 1.5 Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

Power circuit wiring using 2 runs of 2.5 sq mm PVC insulated copper wires along with one run of 1.5Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

A.C circuit wiring using 2 runs of 4 sq mm PVC insulated copper wires along with one run of 2.5Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

Power wiring using 4 runs of 4 sq mm PVC insulated copper wires through 20mm dia PVC conduit with PVC fittings.

Power wiring using 4 runs of 6 sq mm PVC insulated copper wires through 20mm dia PVC conduit with PVC fittings.

Supply of 63A TP switch fuse isolator

Supply of 32 A DP switch fuse isolator

Supply and fixing with the following 2M Box 1 No, 2M Plate 1 No, 16A A.C Socket 1 No

2M Box 1 No, 2M Plate 1 No, 20A A.C Switch 1 No

3M Box 1 No, 3M Plate 1 No, 6A Socket 1 No, 6A Switch1 No

3M Box 1 No, 3M Plate 1 No, 16A Socket 1 No, 16A Switch 1 No

6M Box 1 No, 6M Plate 1 No, 6A Socket 2 No’s, 6A Switch 2 No’s

Supply of FAN and LIGHT Fittings Supply of electronics Step type Fan Regulator

Supply of 230V, 50hz,48 inch (1200mm) ceiling fan with all standard accessories and connection from the fan point

Supply of 230V, 50hz,12 inch (300mm) bracket fan with all standard accessories and connection from the fan point

Exhaust fan of 230V, 50hz, 12 inch (300mm) size all standard accessories and connection from the fan point

Supply of 230V, 50 hz bell / buzzer/ musical bell with all accessories

Supply of 230V, 50 hz Commercial type 230V, 50 hz Linear suspended LED Luminarie BPTX 36 UDL LED 4F connect UDL BAJAJ/ equivalent (with SS chain/ SS Sling of 1 metre length) with lamp and all accessories suitable to mount on Ceiling with conection by 1.5 sqmm copper conductor wire from the light point.

Supply of 230V, 50 hz Commercial type Linear suspended/ceiling mounted LED Luminarie BPTX 28W LED 4F BAJAJ/ equivalent (with SS chain/ SS Sling of 1 metre length) with lamp and all accessories suitable to mount on Ceiling with conection by 1.5 sqmm copper conductor wire from the light point.

Supply of 230V, 50 hz Commercial type Lineat suspended/ ceiling mounted LED Luminaroe BCL 5B 20W BATON mount on ceiling with conncetion by 1.5 sqmm copper conductor wire from the light point.

Supply of 230V, 50 hz Commercial type Linear suspended ceiling mounted LED Luminaire BLTRU 20W Baton BAJAJ/ equivalent with lamp and all accessories suitable to mount on ceiling with connection by 1.5sqmm copper conductor wire from the light point

Supply of 230V, 50 hz street light luminaire EDGE LED BRTFG 45W LED Luminate BAJAJ/ Equivalent make with lamp to be mounted on street light pole or as wall bracket with connection by 1.5 sqmm copper conductor wire fromthe ligh point.

Supply of 230V, 50 hz 36/40W lamp (BTIR 140 PC WEB1) with tube lights and conncetion by 1.5 sqmm copper conductor wire from the light point.

Supply of 230V, 50 hz LED Luminarie model BPTX20 watts 4 feet Bajaj equivelent

Supply with the following (Make:Legrand/Schneider) 8M Box 1 No, 8M Plate 1 No, with 6A Socket 3 No’and 6A Switch 2 No’s

4M Box 1 No, 4M Plate 1 No, with 6A Socket 1 No, and 6A Switch 1 No

Buzzer point wiring with 1.5 sqmm PVC insulated copper conductor 650 V grade wires in surface/ concealed PVC conduit system including providing one No.5 AMP buzzer plate type push Button/5 AMP 2 Pin Plug socket in sheet steel box with cover complete with 1.5 sqmm circuit

5A power point wiring with 1.5 sqmm PVC insulated copper conductor 650V grade wires na d2.5 sqmm green PVC insulated copper earth wire/ 14 SWG copper wire in surface/ concealed PVC conduit system including providing and fixing one no.5 AMP 5 pin 250V socket outlet & 5 Amps 250V switch MS box with sheet steel cover complete with 1.5 sqmm circuit

Same as above but 5 AMP power point in the lighting control board itself

15A power point wiring with 2.5 sqmm PVC insulated copper conductor 650V grade wires and 2.5 sqmm green PVC insulated copper earth wire/ 14 SWG copper wire in surface/ concealed PVC conduit system including providing and fixing one no.plate type 15Amps 3 pin/ Universal 6 in 250V socket outlet and 15 SMP 250V switch in MS box with sheet steel cover. One point in one circuit

Supply of Net work Wiring Accessories Supply of CAT 6 Cable through PVC conduit including Termination. (Molex, AMP, Finolex/reputed make

Supply all materials and providing end termination of CAT-6 Cable (Molex, AMP, Finolex)/Reputed make

Supply, Concealing and Fixing of Back box 1 No, Single face plate 1 No, RJ 45 1 No (Molex)

Supply, Concealing and Fixing of Back box 1 No, Single face plate 1 No, RJ11 1 No

Supply, Concealing and Fixing of Back box 1 No, Dual Single face plate 1 No, RJ 45 1 No, RJ11 1 No (Molex)

Supply of Networking system with 6U Rack 1 No, 6 Channel PDU 1 No, 24 Port Patch Panel 1 No, 8 Port Patch Panel 1 No full loader 1 No, rack mounting kit 1 No (Netrack,D-Link)

SUPPLY OF INTER COM WIRING ACCESSORIES Supply of flush type 2 pin telephone socket outlet in MS box with 3mm thick hylam sheet cover

Supply of 2 Pair Telephone Cable through PVC conduit including Termination. (Finolex)/equalant make

Supply of EPABX with Crone Box reputed make with minimum 20 nos inter com connection facility along with BSNL call diversion facility

5 pair tag block

Description of Work / Item(s)

SWITCH BOARD,MOTOR CONTROL CENTERS, REMOTE CONTROL PANELS,DISTRIBUTION BOARDS(AS PER SPECIFICATION AND FEEDER DETAILS) Installation, testing and commissioning of Cubical Type floor mounting Panel fabricated out of 14/16 SWG CRCA sheet duly Powder coated with all inter connections with the following accessories.

Installation, testing and commissioning of S SB (UPS) PANEL

Distribution Boards + Accessories Installation, testing and commissioning of the following MCB DB’s double door made out of 16 SWG CRCA sheet, dust and vermin proof wall mounting in vecess/surface consisting of the following A.C. DB – 6 way VDB with 100A 100Ma RCBO -1 No. 40A,32A,25A,16A TP/SP MCB full set poder coated ms encloser

P.D.B– 4way TPN DB with 63A 30Ma RCBO 32A,25A,16A,10A Sp MCB – full Set with powder coated encloser

L.D.B – 8way TPN-DB with 40A 30Ma ELCB+MCB 1 No. 16A,10A, 6 A SP MCB- Full Set with powder coated encloser

UPS-DB – 4way TPN DB with 40A 2P MCB- 1 No., 32A,25A,16A,10A SP MCB – Full Set with powder coated encloser

Installation, testing and commissioning of the following 63A/40A 5 pin Industrial Socket+ 63A/40A 4P MCB Isolator with powder coated MS enclosure

40A 4 P MCB Isolator with powder coated MS enclosure

100A 4P MCCB with powder coated MS enclosure

63A 4P MCCB with powder coated MS enclosure

INSTALLATION OF L.T CABLE ( ALUMINIUM) Installation, testing and commissioning of 1.1kV PVC / XLPE insulated armoured under ground cables with aluminum / conductor. Type AYFY/YRY/ YY To be laid including excavated trenches. Supply and laying Bricks, Sand refilling excavated trenches/GI Pipes, Hume Pipes, Cable Trays, building surfaces. All as per standard specifications and as approved. 3.5 x 185sq mm Alu. Armoured cable

3.5 x 95sq mm Alu. Armoured cable

3.5 x 70sq mm Alu. Armoured cable

3.5 x 50 sq mm Alu. Armoured cable

3.5 x 35sq mm Alu. Armoured cable

3.5 x 25sq mm Alu. Armoured cable

4 x 16 sq mm Alu. Armoured cable

4 x 10sq mm Alu. Armoured cable

4 x 6sq mm Alu. Armoured cable

Installation, testing and commissioning of Copper Cables Laying of 1.1kV PVC / XLPE insulated armoured under ground cables with aluminium / copper conductor. Type AYFY/YRY/ YY To be laid including excavated trenches. Bricks, Sand, refilling excavated trenches. All as per standard specifications and as approved. 4x10 sq mm copper Armoured cable

4x6 sq mm copper Armoured cable

4x4 sq mm copper Armoured cable

4x2.5 sq mm copper Armoured cable

Installation, testing and commissioning of End termination of Armoured aluminium cables using single compression brass cable Glands Crimping type tinned CU Lugs and GI hardware. Rate include cost of gland earthig. All as per standard specifications and as approved 3.5 x 185sq mm Alu. Armoured cable

3.5 x 95sq mm Alu. Armoured cable

3.5 x 70sq mm Alu. Armoured cable

3.5 x 50 sq mm Alu. Armoured cable

3.5 x 35sq mm Alu. Armoured cable

3.5 x 25sq mm Alu. Armoured cable

4 x 16 sq mm Alu. Armoured cable

4 x 10sq mm Alu. Armoured cable

4 x 6sq mm Alu. Armoured cable

Installation, testing and commissioning of End termination of Armoured copper cables using single compression brass cable Glands Crimping type tinned CU Lugs and GI hardware. Rate include cost of gland earthig. All as per standard specifications and as approved 4x10 sq mm copper Armoured cable

4x6 sq mm copper Armoured cable

4x4 sq mm copper Armoured cable

4x2.5 sq mm copper Armoured cable

Installation, testing and commissioning of PVC insulated Copper wire through 20 mm/25mm PVC/ flexible pipe with the following s, including Copper Socket,Crimping 25 sqmm wire

16 sqmm wire

10 sqmm wire

6 sqmm wire

4 sqmm wire

Earthing - Installation, Laying and Commissioning of Copper Plate Earthing Supply at site all materials and provide plate earthing as per lS 3043 and refilling with coal, salt etc. using 600x600x6mm Copper earth plate 40mm dia 2.5Mtr length Gl watering pipe hardware items for riveting of 25 X 3 mm copper strip including the construction of the earth pit chamber providing chamber cover etc.

Installation of Cast Iron Plate Earthing Laying and commissioning at site all materials and provide plate earthing as per lS 3043 and refilling with coal, salt etc. using 1200x1200x12.5mm Cast iron plate 40mm dia 2.5Mtr length Gl watering pipe hardware items for riveting of 25 X 3 mm Hot dip GI strip including the construction of the earth pit chamber providing chamber cover etc.

Installation of Pipe earthing Installation, testing and commissioning of pipe earthing with 3.5 M long X 40mm dia GI earth pipe an dother accessories as per specification and standard code of practice including excavation and refiliing with coal, salft etc.

Installation testing and commissioning of the following sizes of copper flats/wires for earthing of isolatiors, switch boards, motor control centers, distirbution boards, Generator etc. and interconnection of earth pits as per technical specification. Earth stirp/ wires to be taken through GI Pipes/ cable tays/ hyme pipes/ built in trecnches/ soil etc. wherever necessary. Rate shall be inclusive of connected civil works, necessary tinning providing sockets and end terminationof coppper strips/ wires with all accessories required for the completion of work. 25x3mm Coper Strips

25x3 mm Hotdip Strip

25x6 Hotdip Strip

No.6 SWG Copper conductor

No.8 SWG Copper conductor

No.10 SWG Copper conductor

Installation, testing and commissioning of cable Tray and accessories Fabrication, Erection, installation of structural supports for cable, cable tray and other structural materials, not covered elsewhere in the bill of quantities including one coat of metal primer and two coats of grey paint.

Installation, testing and commissioning of aluminium perforated cable trays with covers in walls with supporting materials of 300x2mm perforated cable tray with all fixing accessories

Installation, testing and commissioning of 200x2mm perforated cable tray with all fixing accessories

Installation, testing and commissioning of individual KWH meter with suitable CTs for the outgoing feeder of Main LT panel excluding capacitor feeder including necessary wiring if insited by Electircal instpectorate .

Installation, testing and commissioning of MS items for cable tray, racks etc.

Installation, testing and commissioning of 6mm MS Chequered Plate

Internal Wiring & LT Electrification, Light Point wiring and using Modular Switches. /switch boards Light point wiring with 1.5 sqmm pvc insulated Cu. conductor 650V grade wires and 2.5 sqmm green PVC insulated copper earthwire/ 14SWG copper wire in surface/ concealed PVC conduit system including providing and fixing 1 No. 5A single pole plate/modular type switch in sheet steel box with cover, complete with 1.5 sqmm circuit, for one light point controlled by one switch. The point length will be limited to 10 Mtrs (including circuit wiring and inter connections as required). Installation, testing and commissioning of 1 No light point controlled by 1 No. 6A SP modular Switch.

Installation, testing and commissioning of 2 No’s light point controlled by 1 No. 6A SP modular Switch.

Laying of 3 No’s light point controlled by 1 No. 6A SP modular Switch.

Installation, testing and commissioning of 1 No Ceiling Fan/Wall Fan/Exhaust Fan point controlled by 1 No. 6A modular SP Switch.

Installation of 1No,6A socket outlet controlled by 1 No 6A SP modular Switch along with the other light switches.

Independent position

Installation, testing and commissioning of modular type16A Power Plug including circuit wiring Light circuit wiring using 2 runs of 1.5sq mm PVC insulated copper wires along with one run of 1.5 Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

Power circuit wiring using 2 runs of 2.5 sq mm PVC insulated copper wires along with one run of 1.5Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

A.C circuit wiring using 2 runs of 4 sq mm PVC insulated copper wires along with one run of 2.5Sq mm PVC insulated Copper wire for continuous earthing through 20mm dia PVC conduit with PVC fittings.

Power wiring using 4 runs of 4 sq mm PVC insulated copper wires through 20mm dia PVC conduit with PVC fittings.

Power wiring using 4 runs of 6 sq mm PVC insulated copper wires through 20mm dia PVC conduit with PVC fittings.

Installation, testing and commissioning of 63A TP switch fuse isolator

Installation, testing and commissioning of 32 A DP switch fuse isolator

Installation, testing and commissioning of the following 2M Box 1 No, 2M Plate 1 No, 16A A.C Socket 1 No

2M Box 1 No, 2M Plate 1 No, 20A A.C Switch 1 No

3M Box 1 No, 3M Plate 1 No, 6A Socket 1 No, 6A Switch1 No

3M Box 1 No, 3M Plate 1 No, 16A Socket 1 No, 16A Switch 1 No

6M Box 1 No, 6M Plate 1 No, 6A Socket 2 No’s, 6A Switch 2 No’s

Installation, testing and commissioning of FAN and LIGHT Fittings Installation of electronics Step type Fan Regulator

Installation, testing and commissioning of 230V, 50hz,48 inch (1200mm) ceiling fan with all standard accessories and connection from the fan point

Installation, testing and commissioning of 230V, 50hz,12 inch (300mm) bracket fan with all standard accessories and connection from the fan point

Installation, testing and commissioning of Exhaust fan of 230V, 50hz, 12 inch (300mm) size all standard accessories and connection from the fan point

Installation, testing and commissioning of 230V, 50 hz bell / buzzer/ musical bell with all accessories

Installation of 230V, 50 hz Commercial type Linear suspended LED Luminarie BPTX 36 UDL LED 4F connect UDL BAJAJ/ equivalent (with SS chain/ SS Sling of 1 metre length) with lamp and all accessories suitable to mount on Ceiling with conection by 1.5 sqmm copper conductor wire from the light point.

Installation, testing and commissioning of 230V, 50 hz Commercial type Linear suspended/ceiling mounted LED Luminarie BPTX 28W LED 4F BAJAJ/ equivalent (with SS chain/ SS Sling of 1 metre length) with lamp and all accessories suitable to mount on Ceiling with conection by 1.5 sqmm copper conductor wire from the light point.

Installation, testing and commissioning of 230V, 50 hz Commercial type Lineat suspended/ ceiling mounted LED Luminaroe BCL 5B 20W BATON mount on ceiling with conncetion by 1.5 sqmm copper conductor wire from the light point.

Installation, testing and commissioning of 230V, 50 hz Commercial type Linear suspended ceiling mounted LED Luminaire BLTRU 20W Baton BAJAJ/ equivalent with lamp and all accessories suitable to mount on ceiling with connection by 1.5sqmm copper conductor wire from the light point

Installation, testing and commissioning of 230V, 50 hz street light luminaire EDGE LED BRTFG 45W LED Luminate BAJAJ/ Equivalent make with lamp to be mounted on street light pole or as wall bracket with connection by 1.5 sqmm copper conductor wire from the ligh point.

Installation, testing and commissioning of 230V, 50 hz 36/40W lamp (BTIR 140 PC WEB1) with tube lights and conncetion by 1.5 sqmm copper conductor wire from the light point.

Installation, testing and commissioning of 230V, 50 hz LED Luminarie model BPTX20 watts 4 feet Bajaj equivelent

Installation, testing and commissioning with the following (Make:Legrand/Schneider) 8M Box 1 No, 8M Plate 1 No, with 6A Socket 3 No’and 6A Switch 2 No’s

4M Box 1 No, 4M Plate 1 No, with 6A Socket 1 No, and 6A Switch 1 No

Buzzer point wiring with 1.5 sqmm PVC insulated copper conductor 650 V grade wires in surface/ concealed PVC conduit system including providing one No.5 AMP buzzer plate type push Button/5 AMP 2 Pin Plug socket in sheet steel box with cover complete with 1.5 sqmm circuit

5A power point wiring with 1.5 sqmm PVC insulated copper conductor 650V grade wires na d2.5 sqmm green PVC insulated copper earth wire/ 14 SWG copper wire in surface/ concealed PVC conduit system including providing and fixing one no.5 AMP 5 pin 250V socket outlet & 5 Amps 250V switch MS box with sheet steel cover complete with 1.5 sqmm circuit

Same as above but 5 AMP power point in the lighting control board itself

15A power point wiring with 2.5 sqmm PVC insulated copper conductor 650V grade wires and 2.5 sqmm green PVC insulated copper earth wire/ 14 SWG copper wire in surface/ concealed PVC conduit system including providing and fixing one no.plate type 15Amps 3 pin/ Universal 6 in 250V socket outlet and 15 SMP 250V switch in MS box with sheet steel cover. One point in one circuit

Installation, testing and commissioning of Net work Wiring Accessories Installation, testing and commissioning of CAT 6 Cable through PVC conduit including Termination. (Molex, AMP, Finolex/reputed make

Installation, testing and commissioning of all materials and providing end termination of CAT-6 Cable (Molex, AMP, Finolex)/Reputed make

Concealing and Fixing of Back box 1 No, Single face plate 1 No, RJ 45 1 No (Molex)

Concealing and Fixing of Back box 1 No, Single face plate 1 No, RJ11 1 No

Concealing and Fixing of Back box 1 No, Dual Single face plate 1 No, RJ 45 1 No, RJ11 1 No (Molex)

Installation of Networking system with 6U Rack 1 No, 6 Channel PDU 1 No, 24 Port Patch Panel 1 No, 8 Port Patch Panel 1 No full loader 1 No, rack mounting kit 1 No (Netrack,D-Link)

Installation, testing and commissioning of intercom accessories Installation of flush type 2 pin telephone socket outlet in MS box with 3mm thick hylam sheet cover

Installation, testing and commissioning of 2 Pair Telephone Cable through PVC conduit including Termination. (Finolex)/equalant make

Installation, testing and commissioning of EPABX with Crone Box reputed make with minimum 20 nos inter com connection facility along with BSNL call diversion facility

Installation, testing and commissioning of telephone tag block in sheet box withcover(modular)10 pair tyag block

Installation, testing and commissioning 5 pair tag block

Preparation of complete electrical schemes drawings, getting scheme approval from Electrical Inspectorate and energization order

OMNI ELECTRICS

ABM Electricals

COSMIC ELECTRICALS AND ENGINEERS PVT. LTD.

Powertex

Everline engg entp p ltd

Linsta Services

GRACETECH ENGINEERS

Leela Electricpower Services Pvt.Ltd

Linsta Services

OMNI ELECTRICS

GRACETECH ENGINEERS

COSMIC ELECTRICALS AND ENGINEERS PVT. LTD.

Everline engg entp p ltd

Powertex