PROVN OF INTERLOCKING TILES AND PRECAST RCC WALL AT VARIOUS LOCATIONS AT MIL STN GANDHINAGAR

Amount

M&L for surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil cokpete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as sepcified and directed.

M&l 25 mm avg thickness Sand filling/stone dust filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for removing excavated material nexc 50m and depositing where directed at a level n. exc. 1;5m above the starting point in soil complete all as specified and directed.

M&L for removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for hard core, broken to gauge n exc 63 mm complete all as specified and directed.

M&L for cement concrete (1:2:4) type B2 using 40 mm graded stone aggregateas in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (40 mm graded gregate) filling and mass concrete all as specifed and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L precast curve stone of cement concrete type C-1 (1:3:6) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete (Note size of curve stone 300X150X450 mm) complete all as specified and directed.

M&L pre stressed pre cast RCC (M-25 grade) column cross section 150 mm x 150mm with contineous vertical grooves of size 60 mm x 35 mm at two sides of column to receive the precast panels including reinforced with 7 nos wires of 3 mm dia high tensile corbonized steel surfaces finished even and smooth including errecting in position all as specified and as directed. Make as approved by GE.

M&L pre stressed pre cast RCC (M-25 grade) panels of cross section of panel (300X45 mm) reinforced with 4 nos wires of 3 mm dia high tensile corbonized steel, including fixing in position in between column grooves and jointing and flush pointing of all horizontal and vertical joints of panels with cement mortar 1:3 complete all as specified and as directed. Make as approved by GE.

S&F mild steel work in weather shed posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 75 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded agregate) complete all as specified and directed.

M&L 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in Sub-floors, sub-bases, Floors and Pavings, etc. complete all as specified and directed.

M&L for colour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering CM 1:4

M&L for colour non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match includig 15 mm thick screed bed of CM 1:6

M&L for 80 mm thick machine pressed concrete rubber moulded interlocking paver block any shape size and tint (as approved by Engr -in- Charge) of mix M-40 with gray cement and pigment .(Note- ISI Marked) complete all as specified and directed.

M&L for 60 mm thick machine precast concrete interlocking paver block M-35 gde size and shape confirming to IS 15658 2006 with grey cement and pigment over and including 25 mm thick sand cushioning complete all as specified and directed.

M&L for rendering 12 mm thick on fair faces of brick work or concrete surfaces of cement mortar 1:4

M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of white cement primer complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

Supply & fixing in ACP as in cladding/panelling/ceilling 3 mm thick on aluminium frame fixed in wall/ceilling/ or RCC coloumn with screw by drilling holes & jointed sealed with silcon all as per manufacture instruction complete all as specified and directed.

S&F manual operated strip ferrari 570 GSM fabric Awning with alumunium structure, MS Joints complete all specified and directed by Engr-in-Charge

M&L for preparation of new surfaces of wall and applying two coats of synthetic enamel paint over a coat of priming paint as primer complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubbering joints laid in trenches or in floors 75 mm bore complete all as specified and directed.

M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick laminated hylam sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :-

(a) One light/fan point controlled by one switch

(b) One multi purpose socket 5 Amps, Independent board.

M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed.

S&F switch piano, flush button single pole, one way 5 Amps complete all as specified and directed.

S&F socket outlet 2 in1, 3 pin, 5 Amps, flush type complete all as specified and directed.

S&F socket outlet multipurpose, 3 pin, 5 &15 Amps flush type complete all as specified and directed.

S&F switch piano flush button single pole, one way 15 Amps complete all as specified and directed.

S &F fix Distribution Board SPN 4 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed.

S & F MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve,10KA , fixed in sheet metal board complete including connecting.

S & F MCB’s SPN 32 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

S & F LED ceiling mounted recessed round / square type luminaire 16 watt warm white and glare free soft illumination all as per specified and directed as per Engineer in charge.

S&F, PVC insulated and PVC sheathed, 3 core, multi stranded, copper FRLS conductor 1100 Volt grade, confirming to IS-694/2010 with lates amendment, cable of size 6 Sqmm, for connecting light/ water cooler etc passing through conduit complete all as specified and directed.

Ramdev and Sons

ALBA AC AND REF SERVICES

Shree Builders

K K Construction Co

Navkar Enterprises

Priya Construction co.

SNEH TRADERS

Sharnamsingh and Co