Annual maintenance of BIRRD hospital old OPD for the year 2026-27

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead ---Brick work

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead in R.C.C work

Demolishing and disposal of unserviceable materials within 100 metres lead in unreinforced cement concrete up to 150 mm thick

Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metres lead. Not exceeding 3 sq.m in area.

Dismantling, clearing away and carefully stacking materials useful for re-use, terracing work in roofs or floors.

Dismantling AC or GI sheet roofing including ridges, rafters and purlins etc., and carefully stacking useful materials for reuse.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. Ordinary soil-Manual means upto 3m depth.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. Thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc. complete.

Filling of foundations and basement with good gravel in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials , incidental charges etc., complete.

Cement Concrete (1:4:8) using 40mm (0.54 cum) and 20mm (0.27 cum) and 12mm (0.09 cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layer of not more than 15cm thick well compacted including curing machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5)-M15 grade using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.

..do - for precast slabs 40 mm thick using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, but including cost of necessary form work etc., complete as directed by the department.

..do - for precast slabs 50 mm thick using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement excluding cost of steel and tying of grills, but including cost of necessary form work etc., complete as directed by the department.

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire, 2 nos of 20G binding wire in tandem are to be strictly adhered). do-High yield strength deformed bars below 36 mm Fe-415.

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM (1:5) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc., complete.

Plastering in Cement mortar 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions

-do - in C.M (1:3) 12mm thick

-do - in C.M (1:3) 20mm thick

-do - in C.M (1:5) 12mm thick

-do - in C.M (1:5) 20mm thick

Finishing the sides of walls with 1st quality glazed wall tiles of red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work with Non-skid red or white full body Ceramic floor tiles of size 450 x 450 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs.

Flooring with Chequered cement concrete heavy duty tiles of 25 mm thick confirming to IS: 13801, IS 1380-12013/IS 1237-2012 using aggregates, cement, pigments of 300x300x25mm size of any shade set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply.

Conveyance of Excavated Earth / debris dismantling meterials ect., with a lead of 5 kms from work site including loading unloading complete as directed during execution.

Engaging following Semi skilled work men (2nd Class) Mason / Carpenter / Plumber / Painter for attending regular maintenance and emergency works when ever required.

Engaging following Unskilled work men - Man / Woman Mazdoor/Watchman for maintenance works.

Engaging office boy for office purpose

Supplying of aluminium anodised section for doors, paritions, windows ventilators etc., including anodisation cost etc., complete

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of M.S tubes & pipes of all diametres as per IS-1161 etc., complete

Suppling of Plain Float Glass 5 mm thick

Suppling of Pin headed Glass 5.0 mm thick

Supply and fixing of Sun control film for glazed windows partition including labour charges etc., complete as directed during execution.

Supply of Aluminium Aldrop (IS:2681) 250 mm long

Supply of Anodised Alluminium tower bolts 10 mm x 250 mm lomg with ISI mark

Supply of Anodised Alluminium tower bolts 10 mm x 200 mm lomg with ISI mark

Supply of Anodised Alluminium Door handles IS 208 125 mm long

Supply of Heavy duty door stopper

Supply of Stainless Steel Butt hinges (IS:12817)- 100 mm Long

Supply of Stainless Steel Butt hinges (IS:12817)- 125mm Long

Supply of Rabbit wire mesh (G.I. Chicken mesh) of not less than 30 gauge

Supply and fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-2003 including the cost and conveyance and all incidental charges, etc., complete as directed during execution. The chain link mesh shall have a zinc coating of type 'heavy' with mass of coating 290 gm/sqm as per IS:4826-1979 (Reaffirmed 2001) Table.1. The mesh shall be provided with heavily coated galvanizede line wires of 4.50 dia. as given in Table.1 of IS:2721-2003. 3"x3" (76 mm x 76 mm) - 8 Gauge ( 4mm).

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-3: for width of doors 851 to 1000 mm)

Providing and fixing double action stainless steel cast hydraulic floor spring (IS:6315-Table 1) for doors including cost of cutting floors as required, embedding in floors and S.S.cover plates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete (door weight capacity up to 80 kgs)

Supply and fixing of follwing PVC / SWR Pipes & fittings (as per ISI standards ) 6 Kgs / Sq.Cm including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends, plugs, couplers, junctions, tees,etc., with solvent jointing as per standard practice.

-do- 75mm dia 3 M single socket pipe

-do- 110mm dia 3M single socket pipe

-do- 160mm dia 3 M double socket pipe

Supply of UPVC / SWR pipe fittings( U.V resistant) as per approved make with ISI standards

-do-110mm dia plain bend 87.5 Degrees.

-do- 110mm dia Door bend 87.5 Degrees

3" (76.2 mm) Nahany Trap with jali

-do-110x75mm dia Reducer

-do-110mm dia Single Tee (With Door)

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500 ml of liquid concentrated micronized cement water proof compound/ 100 ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- single coat for old wood work

-do- single coat for & Old Iron work old plastered surface

-do- Two coats for new plastered surface over primer coat (total three coats)

-do- Two coats for old wood work or old plastered surface.

-do- Two coats for new Iron work. over primer coat (Total (03) three coats)

-do- Two coats for old iron work.

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

-do- Single coat for Internal walls - Old

-do- Two coats for Internal walls - old

-do- Two coats for Internal walls - new over primer coat (total 3 coats)

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

-do- Single coat for External walls - old

.-do- Two coats for old external walls.

do- Two coat for External walls - new Over primer coat (Total Three coats)

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls.-do- for old work

Supplying and fixing in position 30 mm thick Flush Door Shutters, solid bond wood block board type with commercial ply on both faces of standard make Conforming to IS :2202 of standard make with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Teak wood frames of size 75mm x 100mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Minimum of 4 hinges will be required for fixing the door with the frame.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS aluminium glazed partitions using 10MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS and 5.00 mm thick plain glass to full height. Using with LAM to a height of 0.91 metre at bottom panel and remaining height with glass and aluminium sections anodised to 12 to 15 microns and of sections of size 37 mm x 62 mm and 1.5 mm thickness with one metre centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block - 550 x 400 mm - Single C.P. Pillar cock

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556- Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent brand approved by the department

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supply and fixing of PVC low level systern with internal components & short bend: 8 liters capacity single flush

SYMET 2 in 1 Faucet (1.50 mts. Tube) with hook (as per Prayag make CAT.NO:188) as directed during execution.

Supply and fixing TV shape mirror with plastic frame size 609.6 mm x 457.2 mm

SYMET BIB COCK (CAT.NO:123) Fancy 15 mm size with deluxe handles,122 mm long and 110 mm high and 43mm breadth 12mm seat dia and replaceable washers,having approx. weight of 105gms.Provided with Flange of 56mm Dia.

SYMET PILLAR COCK FANCY(ROMAN HANDLE)(CAT.NO:131-1) (15 mm)1/2''size with roman handles,125 mm long and 131mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 125gms

supply and fixing CP short body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make 400 grams

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size

Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia

Supply and fixing 12.7mm NP bib tap (Long Body) Indian make heavy duty 400 grams. (Seiko/Senior).

Supply and fixing 12.7mm NP stop cock Indian make heavy duty (400 Grms). (Seiko/Senior).

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity/out put of machine 0.24/1Cum)

1) The owner should transport the JCB to the work spot at his own cost.

2)TheExcavator- Loader (JCB) should be able to execavate a minimum of 40 cubic metre of Earth per hour.

3) TheExcavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic meter of loose factor per each tractor.

4) The rate per hour is inclusive of all the cost like POL, Transporting of machine, Driver Batta and other incidental charges.

5) The Payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2 &3 cited above.

6) The Excavator- Loader (JCB) should have the Tacho meter and it should function properly.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution.

Provinding and placing on terrace (at all floor levels) polyethylene water storage tank with Double layer confimining to IS:12701-1996, aproved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fiber Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost & conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work.

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm confirming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

.-do- 22.20mm OD pipe- SDR13.5

.-do- 28.60mm OD pipe SDR13.5

.-do- 54mm OD pipe SDR 13.5

Vinyl Flooring Sheets or tiles having a nominal total thickness of 1.5 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance as per standards.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of Stainless steel fly proof wire mesh of not less than 20 gauge

Supply of Medium Teak wood scantlings up to 2 mts

Labour charges for wrought and put-up for wood scantlings.

Supply of Medium density fibre board exterior grade both side laminated 18 mm thick

Supply of Plywood BWR/ BWP Grades - IS:303 (Boiling water resistant) 9 Ply - 19 mm thick Plywood

Supply of Plywood BWR/ BWP Grades - IS:303 (Boiling water resistant) 9 Ply - 12 mm thick Plywood

supply of laminated sheet matt finish- 1mm thick

Labour charges for wrought and put up including fixing in position frames, shutters for doors, windows, ventilators etc., complete for Windows framed plnked.

Labour charges for removing the existing aluminium partitions with all the accessories including glass sheets glazing clips rubber beadings etc,. and re-fixing the same as directed by the department etc,. complete.

Supply and pasting of digital design echo solvent sticker sheet to the plain float glass and fixing the glass to the existing BITW frame of required sizes and provided in specified places as directed by the department. The cost is including materials, adhesive for fixing, labour for printing, fixing etc., complete but exclusive of GST.

Supply and fixing of Glow Sign Radium stickers name plate / sign (or) instruction boards using 3mm thick Acrylic white sheet as back ground and glow sign radium sticker one layer for letters of different sizes as directed during execution including cost of 3mm thick Acrylic sheet, radium sticker and all labour charges for computer design and cutting, pasting and fixing the boards to walls.

Supply & fixing in position of M.S. Tubes & pipes of all diametres as per IS-1161 including Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position with two coats with synthetic enamel paint Garde-I over a primary coat (Red oxide metal primer) (total three coats) of approved make and colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealant . Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e., in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm)

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the slabs against supply). -do- Multi red colour Granite 18-20 mm thick upto 2.43 M.

Half Rounding the edges of Marble/Granite stone slabs of all thicknesses including polishing the same.

Labour charges for Polishing the Shahabad / Cuddapah slab /Bethamcherla / Macherla / Marble slab flooring and skirting -do- Double coat.

SYMET STOP COCK(CAT.NO:141):as per IS 9763- 2000 with ISI mark 15mm size with male thread deluxe handles, 86mm long and 90mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 90gms.

Supply of CPVC Pipes, fittigs - 32mmdia Ballvalve

Supply of CPVC Pipes, fittigs - 25mmdia Ballvalve

Supply & Fixing of steel surgical long elbow action handle 12.7mm dia bibcock Indian make heavy type including all materials

Hire charges for tractor including crew, oils, conveyance to site and all incidental charges etc., complete, as directed during execution.

Providing and fixing factory made uPVC white colour fixed glazed windows / Ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But, no extra payment on this account shall be made.

Fixed windows / Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap ISI Mark or equivalent approved by the department. - 580 x 440 mm.

Supply of Round Jali

Supply & Fixing NP soap dish heavy type with NP Screws

Providing, fabricated, assembling and fixing in position anodized aluminium partitions Jindal/Hindalco or equivalent make using sections in combination of plain, single grove and double grove as per requirements for the frames of over all size 101.6 mm x 44.45mm, 3.18 thick having section weight, plain sections 2.40 kg/m single grove section 2.541kg/m and double grove section 2.683 kg/m and bottom member 114.3mm x 44.45mm x 3.18mm thick and 2.646 kg/m, aluminium louvers of size 77.6mm x 27.6mm x 1.70mm thick section weight 0.483kg/m, bottom portions provided with 12 mm, thick prelaminated sheet both side of approved colour lamination exterior grade aluminium sections of matt finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c, sections are cut to the required lengths, joints metered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chiselling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m from floor level and 5mm thick plain glass for middle portion viz., 0.9m to 2.13m and top panel with lower sections, the glass and panels fitted with glazing clips of 19mm x 17.3mm. With thickness of 0.9mm, weight 0.124 kg/m aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars of any other sticky materials, vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening). All the frame should be thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.

- do - using aluminium section powder coated to a minimum of 60 -70 microns with exterior durable pure polyester grade power of approved quality.

Providing, fabricating assembling and fixing in position, anodized Aluminium doors using following aluminium mat finish or glossy finish , Outer frame Plain section 101.60 x 44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62 x 44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62 x 44. 45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.30 x 44.45mm thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections cut to length joint metered corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5mm thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teak wood gutties to R.C.C. columns or masonry on sides, beams and flooring in bottom including cutting, chiselling and making good with cement mortar to match the surface; all the frames thoroughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery, complete as per specification.

- do - using aluminium section powder coated to a minimum of 60 -70 microns with exterior durable pure polyester grade power of approved quality.

Digital design, Supply and erection of flex sheet boards with back support of frame work made with 25mm x 25mm MS square pipe (light weight) to erect all the specified places as directed by the department. The cost is including all materials, labour for printing, erection at specified place including cost and conveyance of all materials, labour charges etc., complete as directed by the department .

Supplying & fixing NP coat hook

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet

Polishing the wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete. - do - Polishing for new work

Polishing the wood work with best French Sprit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete. - do - Polishing for old work

Supply and fixing of UV resistant multi-wall polycarbonate sheets for roofing of any colour - 6 mm thick. Sheet Width: 1.20, with Regular Range Colours etc.,complete as directed during execution.

Hire charges for Core drilling machine / Drilling Equipment including crew, oils, conveyance to site and all incidental charges etc., complete, as directed during execution.

Supply and fixing of glow sign Vinyl stickered Text / sign (or) picture of different sizes directly on the glass door partitions/Sheets/Floors/Roads/walk ways/walls etc., as directed during execution using glow sign radium stickers one layer including cost and conveyance of all materials etc., complete.

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated.

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995.