Building

Painting,priming for iron work

Supply and fixing MS Hand railing with MS 50x50mm squire pipe of medium quality for top pipe and verticals as supports and 50 x 25 mm rectangular pipe horizontal pipes - 3 no between verticals including welding and fixing charges for front varrandah

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoa including overheads and contractor profit etc., complete for finished item of work

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in Ground floor for internal walls

Providing and fixing office cabin partition using powder-coated aluminium sections of approved make (Jindal or equivalent), with combination of 12 mm thick pre-laminated particle board panels and 5 mm thick plain/etched glass panels, fixed with necessary clips, rubber beading, screws, sealant etc., including aluminium framed door shutter with 5 mm glass and lock set, complete as per design.

Supply and Fixing of 25mm dia 1.80 mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with hot dip galvanised metal box including all labour charges etc., complete

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 8 modular cover frame covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings using Modular Switches

Supply,Transportation and fixing of 20W, 2000 lumens, 1200 mm length LED batten light, input voltage AC 220-260 Volts with PF>0.9, surge protection : 2KV,THD<15%, with inbuilt driver and and frosted cover CCT:3000K-5700K, minimum CRI>70, etc., complete including cost and conveyance of all materials including frame and tube etc., complete

Fixing of tube light luminaire on wall with all accessories including giving connections and all labour charges etc., complete

Supply and errecting Modular type Electronic stepped type regulators for Ceiling fans complete errected on existing board

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C. insulated flexible copper cable(ISI Mark) in existing pipe for mains including all labour charges etc., complete

Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FR P.V.C. insulated flexible copper cable(ISI Mark) in existing pipe for earth continuity including all labour charges etc., complete

Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FR P.V.C. insulated flexible copper cable(ISI Mark) in existing pipe for mains including all labour charges etc., complete

Supply and fixing 8 Way DP SPN Distribution board with IP-43 protection suitable for single phase DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete with 63A DP Isolator - 1 No for incomer, 20A SP MCBs - 1Nos, 16A SP MCBs - 3 Nos & 10A SP MCBs - 1 No for outgoing including cost and conveyance of all materials and labour charges etc., complete

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains