REPAIR REPLACEMENT OF INTERNAL WIRING FOR MES INSTALLATIONS AND VARIOUS SUB STATIONS UNDER GE UTILITY AMBALA CANTT

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, calling bell etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLS-H), 1100 volts grade, multi-stranded copper conductor, in and including PVC conduit of best quality (ISI Marked) and adequate size grouted in wall or ceiling by cutting chasing the wall and finished the surface as per existing surface including laying of PVC conduits including all fittings and accessories including GI boxes 2 mm thick for housing the switches , including PVC insulated and unsheathed (FRLS-H) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly & inner and outer plates for switches as required at site complete all as specified and directed.

(i) One light point/bell/fan point controlled by one switch complete all as specified and as directed by the Engineer-in-Charge.

(ii) One 3 pin socket point 5 Amps on independent board complete all as specified and as directed by the Engineer-in-Charge.

(iii) One 3 pin socket point 5 Amps on same board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per srl item No. 2.00 here-in-before but for one socket point 15 Amp with 4 sq mm PVC unseathed FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4 sq mm green colour FRLS-H, 1100 volt grade ISI marked copper wire as earth contuinity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement switch piano flush type 1 way 6 Amp oneway 230 volts.Make: Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S&F in replacement switch piano flush type 1 way 16 Amp one way 230 volts.Make: Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S&F in replacement socket out let 2 in 1 3 pin 5 Amp flush type . Make: Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S&F in replacement socket outlet 3 pin,5 & 15 Amp flush type. Make: Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S&F in replacement elctronic Fan regulator 120 watt 2 module.Make: Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S&Fin replacement bell push 6 Amp 1 Module. Make Legrand (Arteor)/Schenider (Clipsal X)/Hager (Insista).

S & F in replacement Calling bell ding dong type SP AC supply, 230 volts complete all as specified and as directed by the Engineer-in-Charge. Make: Legrand (Arteor)/Schenider (Zencelo)/Hager (Insista).

Supply & Fix in replacement ceiling rose surface bakelite 65 x 50 mm two to three terminals along with back plates complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement lamp holder, insulated body, with back plate for angular batten fittings with back plate including one LED 9 Watt complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement MCB SP 6-40 Amps, 240 volt,10 KA 'C' curve ISI marked complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps incl complete connection all as specified and directed by Engr-in-charge.

S&F MCCB DB vertical type 4 way (4 way x 4 pole each) double door load line powder coated complete alongwith 200 Amp rated Bus bar three pole and neutral with acrylic door fixed on wall duly grouted in solid block wall or on wooden board in and including MCCB 100 Amp 4 pole thermal and magnetic release as incomer, lugs/thimbles duly crimped for connection, including taking down & removing old Unserviceable DB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet metal MCB DBs 8 way with 100 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection,including taking down & removing old Unserviceable DB complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix sheet metal MCB DBs 4 way with 63 Amps rated bus bar single pole and neutral with acrylic double door IP-43 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection,including taking down & removing old Unserviceable DB complete all as specified and as directed by the Engineer-in-Charge.

S&F single pole and neutral enclosure with& including a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp,including taking down & removing old Unserviceable enclosure complete all as specified and as directed by the Engineer-in-Charge.

S & Laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volt grade ISI marked with multi stranded copper conductor with one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor connected to common earth dolly including PVC conduit heavy duty not less than 25 mm dia ISI marked of for housing the wires concealed on wall/ceiling including taking out of old U/s sub main wiring of any size complete all as specified and directed by the Engineer-in-Charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

Description all as per srl item No. 19 above but with two run of 10sq mm PVC unseathed FRLS-H copper conductor along with one run of 10sq mm wire green colour FRLS-H as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engr-in-charge.

Supply and fixing indoor decorative LED tube light fitting box type with opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz and including 18/20 W LED tube rod (luminaries) environment friendly, high efficient, T8 with aluminium extrusion heat shrink connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removing complete all as specified and as directed by the Engineer-in-Charge. Note: Depth of box should not be less than 25mm, fully enclosed from all side and openable from front with the means of machine screws.

LED decorative 9W wall bracket SS Finish for side walls powder coated with brown brush metal 317x120x15. including 9 Watt LED Lamp,including disconnecting and taking down existing light fitting and removing complete all as specified and as directed by the Engineer-in-Charge.

S&F LED Bldg Security Light Fittings of capacity 45 watt made up of die cast Cast aluminium housing with balck epoxy powder coating with cover heat resistance glass safty input voltage range 170 to 270 volts, with IP-66 protection and other connected accessories including service bracket of GI pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fotting to GI pipe as required at site and making electrical connection including disconnecting and taking down light fitting and removing complete all as specified and as directed by the Engineer-in-Charge. Make- Havells Cat PT NO:ENDURAPEARLNEOSL40WLED757PASYTOPC, Wipro Cat Pt No: LRO2-45I-XXX-57-XX, Phlips Cat PT No: BRP409LED 040CWHOMRFGSIPSUGR or equivalent in makes as approved by GE.

S&F in replacement LED lamp 9 watt threaded/pin end warm light type suitable for fixing on existing batten/angular holders complete all as specified and as directed by the Engineer-in-Charge.

S&F in replacement surface mounted direct-indirect circular LED luminaire 2'X2', 34 watt (26+8 watt) warm/cool day light with uniform light distribution, white color powder coated deep drawn housing unique floating spherical high efficiency translucent PMMA diffuser for direct lighting with high efficiency LEDs constant current constant volatge driver with efficiency of minimum 85% suitable for Grid / POP ceiling.

Supply and fixing indoor decorative LED tube light fitting box type with opal diffuser, high efficient aluminium housing body in CRCA body suitable for LED tube, high efficient, AC 220-240 volts, 50 Hz and including 10 W LED tube rod (luminaries) environment friendly, high efficient, T8 with aluminium extrusion heat sink connecting with copper conductor flexible cable from ceiling rose to connector of the light including disconnecting and taking down existing light fitting and removing complete all as specified and as directed by the Engineer-in-Charge.

Taking down old earthing complete and Material & labour new earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as specified and as directed by the Engineer-in-Charge and earth testing on completion.

S&F in replacement 18/20 W T8 LED tube rod (luminaries) environment friendly, high efficient, T8 with aluminium extrusion heat sink suitable for fixing on existing fittings.

Note :- Amount of credit of Rs. 83970.00 for retrieved materials is mentioned in Schedule of Credit mentioned in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Sonu Traders