MAINT/REPAIRS TO WOODEN FURNITURE AT NAVAL STATION BHEEMUNIPATNAM UNDER GE(P) NAVY KALINGA

Amount

Removing unserviceable old plastic cane of Dining Chair of any type and S & F plastic cane of 2 mm wide white in colour of semi circular type with border of 4 mm wide plastic cane weaving at Godrej pattern & Polishing complete all as specified as per Drg No FD-228 and as directed by Engineer- in- Charge.

All as per Item No 01 but chair Writing Drg No FD-250/FD-280

All as per Item No 01 but chair Easy Drg No FD-229

Supply and fixing new wooden leg from bed Plywood top with MNF Set, replacing the same with first class hard wood(Teak) of same size and applying two or more coat of French polishing to match with the existing surface including prepration of surfaces complete as per Drawing No FD-246.

Supply and fixing the new plywood top 12 mm to Bed Hard top 12 mm thick with fixing of screws approved quality by replacing the same size complete as per Drawing No FD-246.

M&L and fixing the new Head board both sides from bed hard with Veneer same approved quality as per Drawing No FD-246.

M&L and fixing the new Foot board both sides from bed ply wood with Veneer same approved quality as per Drawing No FD-246.

Supply and fixing the new plywood top 12 mm to Bed Hard top 12 mm thick with fixing of screws approved quality by replacing the same size complete as per Drawing No FD/E6/MAP/08.

M&L the unserviceable Rear wooden leg from Chair dining, replacing the same with first class hard wood (Teak) of same size and applying two or more coat of French police to match with the existing surfaces including preparation of surfaces as per Drawing NO FD-279/MAP04/05/10 , hard rubber rings/PVC toes to be provide at the bottom of legs.

All as per Item Ser No 09 but front wooden leg from chair easy FD-229

All as per item Ser No 09 but rear wooden leg from chair Easy FD-229

M&L the front wooden leg from Chair dining and replacing the same with first class hard wood (Teak) of same size and applying two or more coats of French polishing to match with the existing surfaces including preparation of surfaces complete as per Drawing No FD-279/MAP04/05/10

M&L the unserviceable side wooden rail from Chair dining and replacing the same with first class hard wood (Teak) of same size and applying two or more coat of French polish to match with the existing surfaces including preparation of surfaces ,drilling holes for canning match with the existing frame work complete as per Drawing NO FD-279/MAP04/05/10

M&L of Unserviceable stiffeners wooden of Chair dining and replacing the same with first class hard wood (Teak) of same size and applying two or more coat of French police to match with the existing surfaces including preparation of surfaces as per Drawing No FD-279/MAP04/05/10

M&L the unserviceable Hand rest wooden from chair easy FD-229 and replacing the same with first class hard wood (teak) of same size and applying two or more coat of french polish to match with the existing surfaces including preparation of surfaces as per drawing No FD-229

M&L the front wooden leg from Chair writing, replacing the same with first class hard wood (Teak) of same size and applying two or more coats of French polishing to match with the existing surfaces including preparation of surfaces complete as per Drawing No FD-250.

All as per item No 16 but Rear wooden leg from chair wiriting

All as per item No 16 but hand rest from chair wiriting and drilling holes for canning to match the existing frame work

All as per item No 16 but stiffeners of chair writing

M&L the unserviceable Plywood to chair wooden bottom, replacing the same with 8 mm thick approved quality plywood of the same size as per Drawing No 225.

Removing of old damage US top / bottom for Bin Solid Linen and S&F new top of 18 mm thick pre laminated particle board of size 1200X450mm one side decorative face and other side blancing white face exterior grade OSD Incl 4 mm thick teak wood edging & polishing all around the top all as per Drg No FD/E6/MAP/09 as specifice and directed.

All as per item No 21 but damage draws as per drawing includind decorative handels

All as per item No 21 but shutters with magnetic catcheras per drawing including decorative handels

All as per item No 21 but base including 25 X 25 mm Stiffners.

Removing of old damage mirror S & F new mirror of 5 to 5.5 mm thick mirror to table dressing ladies & polishing all as per Drg No FD-251/MAP as directed.

Removing of old damage drawers and S & F drawers with knobs to table dressing ladies all as per Drg no FD-251/MAP as directed.

Removing of old damage Top S & F new top of table of 12 mm pre laminated particle board one side decorative face and other side blancing white face OSD dressing ladies all as per Drg No FD-251/MAP as directed.

Removing of old damage left/right side ply S & F new left/right side pre laminated partiicle board one side decorative face and other side blancing white face OSD 12 mm thick to table dressing ladies all as per Drg NO FD-251/MAP as directed.

Removing of old damage back side ply S &F new back side ply 6 mm BWR grade to table dressing ladies all as specified as per Drg No FD-251/MAP as directed.

Removing of old damage leg S & F new leg of 1 st class seasoned teak wood table dressing all as specified and directed.

Removing of old damage mirror S & F new mirror of 5.5 mm thick mirror to table dressing gents & polishing all as per Drg No FD/E6/MAP/16 as directed.

Removing old damaged top / bottom of table dressing gents, S & F new Top / Bottom of Pre laminated particle board one side decorative face and other side balancing white face of 18mm thick Grade, ISI Marked (OSD exterior Gde) of size 600 X 100 mm including 4mm thick teak wood beading to all round the exposed part and polishing all as specified as per Drg No FD/E6/MAP/16 and directed by Engr-in-Charge.

All as per Item No 32 but sides of size 1200 X 100 mm

All as per Item No 32 but back ply to be replaced by 12 mm BWR ply of size 1200 X 600mm

Replacement of teak wood frame of size 50X28 mm all round the mirror as per drawing FD No FD/E6/MAP/16

Replacement of 5.5 mm thick glass shelves of size 100 X 600 mm including repair of shelves per drawing FDNo FD/E6/MAP/16

Replacement of teak wood legs of size 450 X 38 X 38 as per drawing including fixing at site per drawing FDNo FD/E6/MAP/16

Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror of Hat Stand with Mirror & polishing as per drg FD-233 and as directed

Removing old damage back side ply, S&F new back side ply 6mm BWR grade Hat Stand with Mirror as per drg No FD-233 as directed.

Removing of old damaged front ply, S&F new front ply 4mm BWR Grade one side teak face Hat Stand wiht Mirror as per drg No FD-233 and as directed.

Removing Old damage hook, and S&F new aluminium hook to had stand and all as per drg FD-233 or as directed.

Removing the unserviceable Top from Table with drawer( 900 x600 mm) and replacing the same with 18mm thick pre laminated particle Board one side decorative face and other side blancing white face 1st class Gde ISI marked (exterior grade) OSD including 4mm thick beading & polishing all as specifice and as per Drawing No Fd-275/249.

All as per item No 42 but Table dining 8 Persons As per Drg NoFD/E6/MAP/03

All as per item No 42 but Table dining 6 personv As per Drg No FD/E6/MAP/03

All as per item No 42 but Table dining 4 person as per Drg No FD/E6/MAP/03

All as per item No 42 but Peg Table as per Dgr No FD-384

All as per item No 42 but Tepoy as per Drg No FD-382

All as per item No 42 but Centre Table as per drg No FD- 276

All as per item No 42 but Table Office officer wood L/Top as per Drg No Fd-84

Removing the unserviceable /broken Hand Board from Chair school with hand board and replace the same with new pre laminated particle board confirming to same size, quality and fixed teak wood beading as per Drg No MAP-05

Removing the unserviceable /broken PVC Seat from Chair school with hand board and replace the same with new PVC Seat confirming to same size, quality all as per Drg No MAP-05

M&L for painting exposed steel surface of Chair school with hand Board with two coat of synthetic enamel black paint over a coat of synthetic enamel black paint over a coat of red oxide primer. The surface shall be throughly cleaned and prepared prior to application of paint as per Drg No MAP-05

Removing old green blaze cloth, S&F new green blaze cloth of best quality to Notice Board 1830x1220mm all as per Drg No FD-99(M) as Directed.

Rremoving old damaged /unsv frme and S&F new frame of Ist class hardwood to Notice Board 1830x1220mm all as per Drg No FD-99(M) all as per specified and directed.

S&F 4mm thick plain sheet glass ordinary quality as sliding to Notice Board 1830x1220mm all as per Drg No FD-99(M) all as per specified and directed.

Rremoving old damaged /unsv ply board of 12 mm thick and S&F 12 mm thick BWP plywood to Notice Board 1830x1220mm all as per Drg No FD-99(M) all as per specified and directed by Eng-in-Charge..

Removing old damaged/unsv soft board and S&F soft board to Notice Board 1830x1220mm all as per Drg No FD-99(M) as per existing all as per specified and directed.

Removing old green blaze cloth, S&F new green blaze cloth of best quality to Notice Board 2240x1220mm all as per Drg No FD-99(M) .

Removing old damaged /unsv frme and S&F new frame of Ist class hardwood to Notice Board 2440x1220mm all as per Drg No FD-99(M) all as per specified and directed.

S&F 4mm thick plain sheet glass ordinary quality as sliding. to Notice Board 2440x1220mm all as per Drg No FD-99(M) as per specified and directed

Rremoving old damaged /unsv ply board of 12 mm thick and S&F 12 mm thick BWP plywood to Notice Board 2440x1220mm all as per Drg No FD-99(M) all as per specified and directed by Eng-in-Charge..

Removing old damaged/unsv soft board and S&F soft board to Notice Board 2440x1220mm all as per Drg No FD-99(M) as per existing all as per specified and directed.

Removing old damaged top / base of book Case, S & F new Top / Base of Pre laminated particle board one side decorative face and other side balancing white face of 18mm thick Grade, ISI Marked (OSD exterior Gde) of size 1230 X 300 mm including 4mm thick teak wood beading to all round the exposed part and polishing all as specified and as for Drg No FD-45/355 as directed by Engr-in-Charge.

All as per item No 63 but sides / centre partition (big) of size 760 X 300 mm

All as per item No 63 but top shelf of size 774 X 300 mm

All as per item No 63 but bottom shelfs of size 380 X 300 mm or 474 X 300 mm

All as per item No 63 but center partition (Small) of Size 390 X 300 mm

Removing of old damage leg, of Table Dining 8 Person S&F new leg of seasoned teak wood all as specified and directed.

Removing of lod damage long rail Table Dining 8 Personand S&F new long rail of seasoned teak wood all as specified and directed.

Removing of old damage short rail Table Dining 8 Person and S&F new short rail of seasoned teak wood all as specified andas directed.

All as per item No 70 But stiffeners

Removing of old damaged leg, of Table Dining 6 Person S&F new leg of 1st class seasoned teak wood duly polished all as per drg and directed.

Removing of lod damage long rail of Table Dining 6 Person and S&F new long rail of 1st class seasoned teak wood duly polished all as specified and shown on Drg and as directed.

Removing of old damage short rail Table Dining 6 Person and S&F new short rail of 1st class seasoned teak wood duly polished all as specified and shown on Drg and as directed.

Supply and fixing of MS Angle bracket of size 60x30x6 fixing with screw to hardbed /Table Dining including 2 coats of paint as specified by Engineer-in-charge

Supply and fixing the Wheels and cushioned with cover for chair Executive type revolving tilting with Arms including all Grinding, welding, broken of unserviceable chair Executive type revolving with arms and replace to its original shape to match the existing steel surface including preparation of surfaces complete as per Drg No HFD/2047

Supply and setting of 100mm thick foam cusion for Sofa set with cover of tapestry cloth of approved quality including white colour astra covering below cover, including removing old covers as per Drg complete all as specified and directed by Engr-in-Charge.

Supply and setting of 100mm thick foam cusion for three seater Sofa with cover of tapestry cloth of approved quality including white colour astra covering below cover, including removing old covers as per Drg complete all as specified and directed by Engr-in-Charge.

Removing unserviceable cover from existing cushion of sofa set and S & F cover made of tapestry cloth of approved quality / colour for cushion of size 530 x 570 x 100 mm thick and including stiching as per existing cushions complete all as specified and as directed by Engineer- in- Charge.

Removing unserviceable cover from existing cushion of three seate sofa set and S & F cover made of tapestry cloth of approved quality / colour for cushion of size 1530 x 570 x 100 mm thick and including stiching as per existing cushions complete all as specified and as directed by Engineer- in- Charge.

S&F in repairs, new cushion seat of chair dining, approved make and quality all as per drawing No.FD/E6/ MAP/10/04 complete as specifed and directed by Engineer-in-Charge.

S&F in repairs, new cushion seat of Stool Dressing, approved make and quality all as per drawing No.FD/E6/ MAP/14 complete as specifed and directed by Engineer-in-Charge.

S&F in repairs, new platic seat 4mm thick with holes of chair dining JCO/ ORS, approved make and quality, fixed with screws complete all as per drawing No.FD/MAP-II/05 as specified and directed by Engineer-in-Charge.

S&F in repairs, cushion with cover of chair computer type revolving/tilting with arms all as per Drg. No.Map/03 complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing the Laminated sheet brown, (sunmica) 1mm thick approved quality as reqd to be fixing with fevicoal in repair

Supply and fixing the Veneer sheet 1 mm thick of any pattern approved quality as reqd to be fixing in repair

Removing the Unserviceable wooden parts such as legs and sides of Peg Table, replacing the wooden parts with first class hard wood(Teak) and Top with new pre laminated particle board of same size and applying two or coats of French polishing to match with the existing surfaces including preparation of surfaces complete as per Drawing No 236(M)/284

Removing old damaged legs of Table Centre and S&F new legs of size 60X30 mm to of 400 mm table of 1st class seasoned teak wood as per existing shape and size including polishing all as per drg No FD-276 and as directed.

All as per Item No 88 but long rail of size 20X 50 mm of length 850 mm

All as per Item No 88 but short rail of size 20X 50 mm of length 400 mm

Removing of old damaged leg, of Tepoy S&F new leg of 1 st class seasoned teak wood all as specified asper Drg No FD-382 and directed.

Removing of lod damage long rail of Teapoy and S&F new long rail of 1 st class seasoned teak wood duly polished all as specified and directed.

Removing of old damage short rail and tepoy S&F new short rail of 1st class seasoned teak wood duly polished all as specified and as directed.

All as per item No 93 But stiffener

Removing old damaged legs, of Table With Drawer 900x600x760mm S&F new legs to table of 1st class seasoned teak wood as peer existing shape and size including polishing all as per drg and as directed.

All as per Item No 95 but long rail of size100X25X850mm

All as per Item No 95 but short rail of size 100X25X550mm

All as per Item No 95 but side stiffener of size 25X25X550mm

All as per Item No 95 but centre stiffener of size 25X25X850mm

Removing old damaged Drawer, S&F new drawer with Aluminium handles to tabel as per existing shape and size including polishing all as per drg and as directed.

Dry cleaning of sofa single seater cushions with cover through approved dry clean vendor all as per drg and as directed

PROCESS OF POLISHING OF WOODEN FURNITURES AS UNDER:Cleaning the surface of wooden furniture by sand papering and applying putty where ever required to make the surface smooth and again sand papering and there after applying two coats of French polishing using with malmal cloth upto glossy finish. The hidden un-exposed surface shall be made smooth by sand papering and a coat of wood primer shall be applied as preservation for "Chair Dining ".

All as per Srl Item No. 102 here-in-before but for Chair Easy

All as per Srl Item No. 102 here-in-before but for Chair writing

All as per Srl Item No. 102 here-in-before but for Table dining 8 person

All as per Srl Item No. 102 here-in-before but for Table dressing ladies with mirror

All as per Srl Item No. 102 here-in-before but for Table dining 4 person

All as per Srl Item No. 102 here-in-before but for Table dining 6 person

All as per Srl Item No. 102 here-in-before but for Table dressing gents with mirror

All as per Srl Item No. 102 here-in-before but for Table Center

All as per Srl Item No. 102 here-in-before but for Peg Table

All as per Srl Item No. 102 here-in-before but for Board notice 1220x2440 mm

All as per Srl Item No. 102 here-in-before but for Board notice 900x 600 mm

All as per Srl Item No. 102 here-in-before but for Board notice 1830 x 1220 mm

All as per Srl Item No. 102 here-in-before but for Bed hard

All as per Srl Item No. 102 here-in-before but for Side Board

All as per Srl Item No. 102 here-in-before but for Teapoy wooden

All as per Srl Item No. 102 here-in-before but for Table With drawer 900 x600 mm

All as per Srl Item No. 102 here-in-before but for Table without drawer 900 x 600 mm

All as per Srl Item No. 102 here-in-before but for Double bed (wooden) of size 1500x19550 widthx450mm

All as per Srl Item No. 102 here-in-before but for Dining chair MAP

All as per Srl Item No. 102 here-in-before but for Center/Corner table of size 900x525x400 mm

All as per Srl Item No. 102 here-in-before but for Sofa single seater

All as per Srl Item No. 102 here-in-before but for Dressing counter of size 500x1350x300 mm with mirror

All as per Srl Item No. 102 here-in-before but for Sofa set 4 seater (FD-281)

All as per Srl Item No. 102 here-in-before but for Sofa set 5 seater (FD-281)

SOHAN ENGINEERING ASSOCIATES