Design Supply and Installation of IRC Compliant Place Identification, Multi-direction, Directional and Street Name Stainless Steel Sign Board and Cantilever Sign Board on Internal Roads, Ghat, Junction in District Haridwar Under Mela-2027

Providing and erecting a cantilever 6mtr span mounted sign board with a height of 7.89 m, consisting of one vertical poles and a 6.0 m horizontal MS tube. The sign face both side shall be executed with promotional colourful branding and printing work on corrosion-resistant Type XI DG Retro-reflective sheeting. This shall be fixed over an Aluminium Composite Material (ACM) sheet with an overall thickness of 4 mm (including 0.25 mm thick aluminium coil) clamp with flat 50X5 mm as per dwg ,Vertical faces of all side concrete piller paint with Kataline (or equivalent) Grade-1 water-based acrylic retro-reflective paint for night visibility.The work includes a designed support system of Mild Steel tube as per structural design requirements and IRC:67, utilizing MS Tube of 300 mm NB (323.9 mm OD) with 6.3 mm thickness and 25 mm thick base plates. Clearances must comply with Clauses 802.2 and 802.3, and installation must be performed as per Clause 802.7. The scope covers all excavation, PCC, RCC M-25, TMT reinforcement, and painting. The quoted rate is fully inclusive of all materials, labour, printing costs, T&P, and the deployment of heavy machinery (Crane, Hydra) required for proper completion as per the attached drawing. (Measurement for payment purposes will be based on the Board Area only).

Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of Type XI retro- reflective sheeting, vide clause 801.3, fixed over Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Supply of Retro Reflective Sign Board made up of 4 mm thick Aluminum Composite Panel fully Covered with Prismatic Diamond Grade Sheeting (Type XI) Matter, Symbol, Letter, Logo etc. in both side as per IRC:67 shall be cut by CNC machine of same type of Sheeting or ECF or Latex Printed as per Engineer in Charge. Board shall be supported by 40 mm dia. SS pipe (Grade 304) frame riveted on SS flat 20x5 mm welded inner side of the frame with two posts of 65mm dia SS Pipe with holdfast and the posts of sign board shall be embedded in 450x450x600 mm foundation with concrete (M 25 grade cement) complete in all respect. ( sign board both side )