PMABHIM

Construction of Village Health Clinic Building (Civil work):- Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including over heads and contractors profit but excluding seignorage charges and GST, excluding dewatering charges etc., complete for Foundation of Building.(APSS No. 308)

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete (APSS No 402)including overheads & contractor's profit but excluding seignerage charges and GST

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Footings.

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Pedastals

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Coloumns

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Plinth beam

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Roof beams

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Waist slab of 150 mm thick

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Roof slab of 125 mm thick

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Roof slab of 100 mm thick

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Lintels

Design Mix Concrete VRCC M25 grade Design mix corresponding to IS 456 using with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work, including overheads & contractor's profit but excexcluding seignorage charges & GST for Sunshades

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials complete for finished item of work (APSS No. 901 & 903).(CSSR) for all Floors including overheads & contractor's profit but excluding seignerage charges and GST

Brick Masonary for Superstructure with CM (1:8) proportion using 2nd class traditional bricks of size 23X11X7 cms having minimum crushing strength of 40kg/cm2 including c/c of all materials like Cement, Sand, Bricks, water etc including seigniorage, sales and other taxes on all marerilas including all operational, incidental and labour charges such as mixing cement mortar , Scaffolding charges, etc complete for finished item of work including overheads & contractor's profit but excluding seignerage charges and GST(APSS No 501 & 504)

Brick Masonary for Basement with CM (1:6) proportion using 2nd class traditional bricks of size 23X11X7 cms having minimum crushing strength of 40kg/cm2 including c/c of all materials like Cement, Sand, Bricks, water etc including seigniorage, sales and other taxes on all marerilas including all operational, incidental and labour charges such as mixing cement mortar , Scaffolding charges, etc complete for finished item of work including overheads & contractor's profit but excluding seignerage charges and GST(APSS No 501 & 504)

Ceiling Plastering in CM (1:3) 12mm thick with dubara sponge finishing including cost and conveyance of all materials including all labour charges such as mixing cement mortar and curing etc complete for finished item of work including overheads & contractor's profit but excluding seignerage charges and GST (APSS 901 & 903).

Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials including all operational, incidental and labour charges such as mixing cement mortar and curing etc complete for finished item of work including overheads & contractor's profit but excluding seignerage charges and GST (APSS 901, 903 & 904)

Flooring with non-skid Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)including overheads & contractor's profit but excluding seignerage charges and GST.

Providing skirting 10 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of any colour and finish in all shades and designs, length equal to flooring tiles, flushed to wall surface to set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) including overheads & contractor's profit but excluding seignerage charges and GST

Flooring with non-skid red or white full body Ceramic floor tiles of size 300 mm x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) including overheads & contractor's profit but excluding seignerage charges and GST

Providing dadooing with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 345 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge flushed to wall surface set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work including overheads & contractor's profit but excluding seignerage charges and GST

Flooring with pressed clay flooring tiles, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with cement mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work including overheads& contractor's profit but excluding GST& seignorage charges,

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials and all operational, incidental and all labour charges etc., complete for finished item of work in all floors for internal walls including overheads & contractor's profit but excluding GST

Painting to new walls and ceiling in two coats with Plastic Emulsion Paints Asian/ Berger/ Nerolac or equivelent and shaded over Priming Coat with Cement Primer water base interior Gr -1 or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908) including overheads & contractor's profit but excluding GST for internal walls

Painting to New walls with two coats of plastic Emulsion Paints Asian / berger/ Nerolac or equavalent quality of approved shade over base coat of cement primer grade 2 making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for External Walls.(APSS No. 912) including overheads & contractor's profit but excluding GST

Supplying, fitting and placing HYSD bar reinforcement (Fe 500 / Fe 500 D grade as per IS 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126) including overheads & contractor's profit but excluding GST

Supply and fixing of Medium Teak wood Door Double shutter fully pannlled door of size 1.20 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and Assam Teak Wood panels - 6 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 250 mm long MS power coated aldrop-1 no,250mm long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, MS Power coated 150 mm long Tower bolts - 2no's Poer coated, MS power coated fancy handles 150mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002 (CSSR)

Supply and fixing of Medium Teak wood Door Double shutter fully pannlled door of size 1.00 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and Assam Teak Wood panels - 6 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' Z" holdfasts, 250 mm long MS power coated aldrop-1 no,250mm long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, MS Power coated 150 mm long Tower bolts - 2no's Poer coated, MS power coated fancy handles 150mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002 (CSSR) including overheads & contractor's profit but excluding GST

Supply and fixing of Medium Teak wood Door single shutter fully pannlled of size 0.80 x 2.10mt with frame made of well seasoned teak wood scantlings of size 100 x 75mm mm and shutter made of side rails 125mm X38, top rail 125mmX38mm, bottom rail 125mmX38mm and intermediate rails of 125 x 38 mm and Assam Teak Wood panels - 6 no's are of 25mm thick as per approved design with fixtures of 6 nos of 9" ' Z" holdfasts, 250 mm long MS power coated aldrop-1 no,250mm long brass latch,125mm long butt hinges 8No's, Door stoppers-2 no, MS Power coated 150 mm long Tower bolts - 2no's Poer coated, MS power coated fancy handles 150mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002 (CSSR)including overheads & contractor's profit but excluding GST

Supplying and fixing of Door of size 0.90X2.10M with single panels of frames made with teak wood and Shutter made with Flush door shutters including MS Z hold fasts , Alluminium tower bolts, handle and butt hinges with all furniture fittings including c/c of all materials and furniture fittings etc complete as per specification (APSS No 1001 & 1002) Door Frame with Shutters including overheads & contractor's profit but excluding GST

Supplying and fixing of Door of size 0.80X2.10M with single panels of frames made with Sal Wood and Shutter made with Sal Wood including MS Z hold fasts , Alluminium tower bolts, handle and butt hinges with all furniture fittings including c/c of all materials and furniture fittings etc complete as per specification (APSS No 1001 & 1002) Door Frame with Shutters including overheads & contractor's profit but excluding GST

Supply and fixing of Wood Polymer Composite(WPC) Door Frame section of 63.5x100 MM .The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member, and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) double extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame 750 X 1800mm including overheads & contractor's profit but excluding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks withhook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes,and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) including overheads & contractor's profit but excluding GST ( Two Tracks Two Panels)

Supply and fixing of Iron Grills for Windows including Labour Charges for Fabrication of MS Steel including cost of Weldong rods, Power Charges & Fixing the grill in position including overheads & contractor's profit but excluding GST.

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1 No for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work including overheads & contractor's profit but excluding GST..

Water supply& Sanitation work: -Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad lowgurard SDR 11 and SDR 13.5 pipes are made from dential CPVC compounds having the same physical roperties for Hot and Cold Water (IS 15778:2007)for 25mm dia including overheads & contractor's profit but excluding GST.

Labour charges for laying, joining, welding, fixing and commissioning the C-PVC pipes including all specials such ascouplers/ bends/ tees etc including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per standard practice - up to 40 mm dia including overheads & contractor's profit but excluding GST.

Supply & fixing of tested NP bib taps at all levels of 12.70mm dia of Indian make 400g first quality including cost & conveyance of all materials, labour charges for finished item of work, and all taxes complete for all floors including overheads & contractor's profit but excluding GST.

Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 110mm dia. double socket including overheads & contractor's profit but excluding GST.

Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2 90mm dia. double socket including overheads & contractor's profit but excluding GST.

Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice including overheads & contractor's profit but excluding GST for 110 mmdia& 90 mm dia.

Supplying and Fixing European Water Closet of 1st quality make white glazed with 'P' trap with low down porcelain flushing tank 10 Lit Capacity internal components and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers including all labour charges for fixing etc., complete.including overheads & contractor's profit but excluding GST.

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 450mm x 300mm with 32 mm nominal size C.P. Fitting with parallel pipe thread onforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with tandard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP oated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and onveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work including overheads & contractor's profit but excluding GST.

Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes but without fittings & base support for tanks including overheads & contractor's profit but excluding GST.

Electrical work: Supply and Fixing of ISI 25mm outer dia medium (1.80mm thickness) grade with IS:9537 part 3 regid PVC pipe with PVC / Metallic Junction boxes and all accessories including Fixing of existing suitable size Consealed box PVC / MS with hook for fan including all labour charges etc., complete including overheads & contractor's profit but excluding GST..

Supplying and Fixing of 25mm dia 2.2 mm thick PVC Conduit pipe concealed in wall with all required accessories including chiseling the wall wherever necessity including masonry work for Light, Fan and separate plug point with wooden.Deep box including all labour charges etc including overheads & contractor's profit but excluding GST.

Labour charges for Chiselling the Brick Masonary walls and repairs as directed by the department. MAT-02151 including overheads & contractor's profit but excluding GST.

Supply of Hot Dip galvanized 20/18 SWG Module box with earthing terminal for 12 Module box including overheads & contractor's profit but excluding GST.

Supply of Hot Dip galvanized 20/18 SWG Module box with earthing terminal for 8 Module box including overheads & contractor's profit but excluding GST.

Supply of Hot Dip galvanized 20/18 SWG Module box with earthing terminal for 6 Module box including overheads & contractor's profit but excluding GST.

Supply of Hot Dip galvanized 20/18 SWG Module box with earthing terminal for 4 Module box including overheads & contractor's profit but excluding GST.

Supply of Hot Dip galvanized 20/18 SWG Module box with earthing terminal for 2 Module box including overheads & contractor's profit but excluding GST.

Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way flush type switch in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for light and bell points including overheads & contractor's profit but excluding GST.

Wiring with run of 2 of 14/0.3mm (1.0 Sq.mm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing PVC conduit pipe including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 1way flush type switch in existing Surface or Concealed pipe wiring including cost and conveyance of all material and all labour charges etc., complete for Fan points including overheads & contractor's profit but excluding GST.

Supply and Run of 2 of 36/0.3mm (2.50 Sq.mm) with Run 1 of 22/0.3mm(1.5Sqmm) FRLS / HFFR PVC insulated flexible ISI mark copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete including overheads & contractor's profit but excluding GST..

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains. including overheads & contractor's profit but excluding GST.

Supply of Cover frames for 12 module box including overheads & contractor's profit but excluding GST.

Supply of Cover frames for 8 module box including overheads & contractor's profit but excluding GST.

Supply of Cover frames for 6 module box including overheads & contractor's profit but excluding GST.

Supply of Cover frames for 4 module box including overheads & contractor's profit but excluding GST.

Supply of Cover frames for 2 module box including overheads & contractor's profit but excluding GST.

Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall including overheads & contractor's profit but excluding GST..

Supply and fixing of 6A 3/2 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete including overheads & contractor's profit but excluding GST..

Supply and fixing of 6A flush type Neon Indicator including overheads & contractor's profit but excluding GST..

Supply and fixing of ISI mark batten holder / angle holder on existing block, but with bulb including all connections etc., complete

Supply, Transportation and Fixing of 48" (1200mm) Sweep 5 Star rated Ceiling Fan with double ball bearings but with regulator including all standard accessories and all labour charges etc., complete including overheads & contractor's profit but excluding GST..

Supply and Transportation and fixing of 1200 mm length,Box type powder coatedtube light luminaire with necessary wiring suitable for fixing 2 Nos retrofit T8 LED tubes but without tube and choke including overheads & contractor's profit but excluding GST.

Supply, transportation and fixing of 20Watt LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >110 lm/W and junction temprature < 70°C, with Ingrees protection IP6 including overheads & contractor's profit but excluding GST.,

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete including overheads & contractor's profit but excluding GST..

Providing independent earthling by excavating a pit to a depth of 2.25Mt in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary No.8 G.I. double earth wire and accessories with 18" dia 2" thick hume pipe ring duly providing staggered holes including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder in layers and all labour charges etc., complete including overheads & contractor's profit but excluding GST.

Drilling of Borewell& Pumpset:-Drilling of Bore well by down the hole hammer drilling to a finished dia of 165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in over burden to dia not less than 200 mm etc., and reaming the bore well to suit insertion of suitable casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and including bore development (Flushing of Bore Well at an average pressure of 150 PSI) conducting yield test, consumables charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc. The entire work should be carried out as per IS-2800 Part I & II 1979 and amended from time to time.including overheads & contractor's profit but excluding GST.Upto 90.00mts depth

Drilling of Bore well ---do---- from 90 mts to 150 mts

Drilling of Bore well ---do---- from 150 mts to 250 mts

Cost, Supply and utilization of uPVC Pipes for Portable Water Supply confirming to IS 4985 / 2000 (3rd version) with sockets as per specifications inclusive of transportation but excluding of all taxes. 180 mm dia PVC 6kg/cm2

Fabrication, Tansportation and Supply of suitable size Panel Board for Single Phase submersible Motor 2 to 3 HP consisting of relay, contractor, starting and running capacitors, Voltmeter, Ammeter Indicator Lams, MCB, on off switch including supply and fixing of DOL starter complete including overheads & contractor's profit but excluding GST..

Supply of 3 core of 2.5 sqmm ISI marke Flat Copper Cable for Submersible Motor confirming to IS 694:1990 of approved Brand including overheads & contractor's profit but excluding GST..

Supply and erecting ISI mark submersible 2.0 HP, Single Phase 25 stages pump set suitable for 105/150mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot. Single phase 250V, 50Hz AC power supply copper winding with waterproof insulation, not affected by chemicals in water, with bronze bearings, nuts & bolts and necessary H-type clamp including overheads & contractor's profit but excluding GST..

Total items 77 only