PROVIDING & FIXING KOTA STONE/PAVER BLOCK FOOTPATH / STREETS , WATER TABLE, PCC ,GAURD STONE AND REPAIRING OF BRTS RAILING AT VARIOUS PLACES IN ADAJAN GAM DEPOT AREA OF WEST ZONE (RANDER)(2nd Attempt).

NAME OF WORK : PROVIDING & FIXING KOTA STONE/PAVER BLOCK FOOTPATH / STREETS , WATER TABLE, PCC

,GAURD STONE AND REPAIRING OF BRTS RAILING AT VARIOUS PLACES IN ADAJAN GAM DEPOT AREA OF WEST ZONE

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

1 Excavation the road surface upto required depth including

removing the excavated materials and depositing on the road

side upto 50 mt. Lead etc. complete and as directed by

engineer in charge.

2 Dismantling of structures on roadways, including disposal of

unserviceable material free of cost in permanent work as

directed by the engineer with all leads and lifts etc. complete.

A) Unreinforced Cement Concrete (P.C.C.) 20.00 C.M. 609.26

(B) Bituminous Pavement 40.00 C.M. 288.65

(C) Non Bituminous Pavement 40.00 C.M. 155.25

(D) Removing existing kotah stone/Paver block 950.00 S.M. 47.72

3 Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator

machine including watering and filling in depressions which 2500.00 S.M. 4.93

occur during the process as directed by engineer in charge.

4 Supplying & filling fine sand(pana) in upto 150 mm compacted

thickness over the base including necessary compaction,

watering etc. complete. Item includes leveling by using

vibratory plates compacted machine.

5 Providing & laying cement concrete 1:2:4 (1 part of cement,

part of coarse sand, 4 part of graded stone aggregate of

mm nominal size) including providing & fixing reinforsement

as specified in drawing with necessary bending, binding and

placing in position and also including formwork of sheating of

steel sheet so as to form exposed finished surface with

necessary centaring, shutteing, propping etc. complete and as

directed by engineer in charge.

(A) R.C.C. kerb 450mm depth and 100mm width 20.00 Rmt. 608.99

(B) R.C.C. kerb 300mm depth and 100mm width. 100.00 Rmt. 437.49

6 Providing & setting 35 to 50 mm thick rough kotah stone

paving for footpath in line, level and in proper gradient

including 25 mm thick bedding in C.M. 1:6 ( 1 part of cement :

6 part of coarse sand) with sufficient ramming consolidation.

Providing joints in C.M. 1:3 ( 1 part of cement :3 part of coarse 190.00 S.M. 312.57

sand) and smooth pointing in C.M. 1:1 ( 1 part of cement :

part of coarse sand) including watering etc. complete and as

directed by Engineer in charge.

7 Providing & setting 50 to 60 mm thick rough kotah stone

water table in line, level and in required gradient including

mm thick bedding in 1:6 (1 part of cement : 6 part of coarse

sand) with sufficient ramming consolidation. Providing joints

in C.M. 1:3( 1 part of cement : 3 part of coarse sand) and

smooth pointing in C.M. 1:1 (1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed

by Engineer in charge.

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

8 Providing & setting 60 to 75 mm thick rough kotha stone kerb

stone ( size 610 mm x 305 mm) in line, level and in truly

vertical position, including joints in C.M. 1:3 ( 1 prt of cement :

3 part of coarse sand) smooth pointing in C.M. 1:1 ( 1 part of 25.00 Rmt. 109.59

cement :1 part of coarse sand) including watering etc.

complete and as directed by Engineer in charge

9 Dismantling carefully existing guly trap chamber upto

required depth & raising the same upto new footpath level

with B.B. masonary in C.M. 1:6 (1 part of cement : 6 part of

coarse san) including 12 mm thick cement plaster in C.M. 1:3 75.00 No. 493.29

(1 part of cement : 3 part of coarse sand) and fixing C.I. cover

etc. complete and as directed by engineer in charge.

10 Dismantling carefully existing Sewer trap chamber upto

required depth & raising the same upto new footpath level

with B.B. masonary in C.M. 1:6 ( 1 part of cement : 6 part of

coarse sand) including 12 mm thick cement plaster in C.M. 1:3 75.00 No. 659.87

( 1 part of cement : 3 part of coarse sand) and fixing C.I. cover

etc. complete and as directed by Engineer in charge.

11 Removing & resetting rough kotah stone paving for footpath

in line, level and in proper gradient including 25 mm thick

bedding in C.M. 1:6 ( 1 part of cement : 6 part of coarse sand)

with sufficient ramming consolidation. Providing joints in C.M.

1:3 ( 1 partof cement : 3 part of coarse sand) and smooth 700.00 S.M. 155.51

pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand)

including watering etc. complete and as directed by Engineer

12 Removing & resetting rough kotah stone water table for

footpath in line, level and in required gradient including

mm thick bedding in 1:6 ( 1 part of cement : 6 part of coarse

sand) with sufficient ramming consolidation, providing joints

in C.M. 1:3 ( 1 part of cement : 3 part of coarse sand) and 700.00 Rmt. 61.94

smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of

coarse sand) including watering etc. complete and as directed

by Engineer in charge.

13 Removing resetting existing rough kotah stone kerb stone or

in required size & thickness in line, level and in truly vertical

position, including joints in C.M. 1:3 ( 1 prt of cement : 3 part

of coarse sand) smooth pointing in C.M. 1:1 ( 1 part of cement 100.00 Rmt. 48.66

: 1 part of coarse sand) including watering etc. complete and

as directed by Engineer in charge.

14 Providing and laying cement concrete 1:5:10 ( 1 Part of

cement, 5 Part of coarse sand, 10 Part of graded stone

aggregate of 40mm nominal size) in 75mm thick and curing 300.00 C.M. 2517.44

completed including cost of form work etc. complete.

15 Providing 100mm thick readymade c.c. kerb of strength M-20

(size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 RMT 274.00

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

16 Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paverblock

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item

also includes all materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

(With colour) 500.00 Smt. 524.00

Without colour 1500.00 Smt. 524.00

17 Providing & fixing interlocking type cement concrete paver

block of approved shape & design having 60 mm thickness (M-

40) purchased from SMC's approved paverblock manufacturer

only on fine sand bedding. Item includes leveling by using

vibratory plates compacted machine. Item also includes all

materials, Labour, euipments, tools, plants, watering, cleaning

For Road Junction 80 mm thick ( M-50) 400.00 Smt. 714.00

18 Providing and laying PLAIN CEMENT CONCERETE M-200-

(1:1.5:3) (1 cement, 1.5 coarse sand, 3 stone Aggregate of

20mm nominal size) for raising / lowering the existing

manhole cover (with frame) of drainage water supply, sewer

trap chamber, Gas chamber, scrapper manhole frame & cover 25.00 No. 583.55

and/or chambers of any utility services upto the newly

carpeted / re-carpeted road surface including in C.M. 1:3 on

both side etc. complete.

19 Removing & Refixing interlocking type cement concrete paver

block (Rubber moulded) of approved shape, design & colour

fixing on fine sand bedding. Item includes levelling by using

vibratory plates compacted machine. Item also includes all 6000.00 Smt. 102.00

materials, labour, equipments, tools, plants, watering,

cleaning etc. complete.

20 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for 25.00 C.M. 3637.34

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

21 Removing and resetting existing ready made C.C.Kerb of

strength of required size & thickness in line,level and truly

vertical position ,including filling joints in C.M.1:1(1part of

cement 1 part of coarse sand) smooth pointing in C.M.1:1 800.00 R.mt. 56.00

(1part of cement : 1 part of stone dust )including watering

etc.complete as directed by engineer-in-charge.

22 Painting two coats of enamel paint (Excluding priming coat)

over previously painted wall with even shade & surface after

removing dirt, dust foreign matter etc. complete.

23 Providing & fixing M.S.Grills of required pattern to as

directed by Engineer Incharge. At all floor levels with M.S.

flats at required spacing & frame around,square or round bars

with round headed bolts & round headed bolts and nuts or by 900.00 Kg 104.20

screws or as per directed by Engineer incharge or Drawing

atteched incl. Priming coat of Red lead paint etc. comp.

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

24 Fabricating and fixing in position MS railing using structural

steel TATA/JINDAL/ Asian sections of YST 310 grade using

hollow box sections, plates, angles, tees, pipes, MS square

polished bars as per drawing. The rates shall include all kinds

of welding, nut bolting, anchor bolting and grouting the bolts

using non-shrink cementitious grouts of Sika or Fosroc make

or The contractor shall be responsible in recting the railing

assembly in the desired line, level and alignment. The railing

shall be firmly fixed to the foundation concrete blocks and

shall be in place once fixed. The rates excluding excavation

and foundation concrete and including for marking of

foundation pits, placing the same in alignment of the road as

directed by the Engineer in charge and or as per drawing with

Priming coat of Red lead paint etc. comp.

25 Providing & applying painting two coats at all levels on new

steel other metal surface with synthetic enemal paint,

brushing interior to give an even shade incl. cleaning the

surface of all dirt, dust & other foreign matter etc. Comp. (A)

For plain grill/ Railling For all Floor

26 Providing and laying cement concrete guardstone in

proportion 1:1:5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded

Stone Aggregate 20 mm nominal size) size and shape as per

the drawing including necessary excavation steel form work

and white Washing etc. complete (Cement and Steel

contractor own supply).

27 Providing and laying cement concrete guardstone in

proportion 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone

Aggregate 20 mm nominal size) size and shape as per the

drawing including necessary excavation steel form work and

white Washing etc. complete (Cement and Steel contractor

28 Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp.

Incl.. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 0.00 C.M. 7380.20

First Floor 0.00 C.M. 7419.85

Second Floor 0.00 C.M. 7459.49

Terrace (third) Floor 0.00 C.M. 7499.13

(B) Vertical and horizontal fins

Ground Floor 25.00 C.M. 10831.75

First Floor 0.00 C.M. 10871.40

Second Floor 0.00 C.M. 10911.04

Terrace (third) Floor 0.00 C.M. 10950.68

29 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

incl. bending, binding & placing in position etc.comp.---

First Floor 1000.00 KG 77.21

Second Floor 0.00 KG 78.21

Terrace (third) Floor 0.00 KG

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

30 Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site of 2500.00 sm 19.57

work with all lead and lift.

31 Providing and applying single coat of bonding agent mixed

with cement in 1:1 proportion the bonding agent should be

SBR based having a minimum solid contents of 40 % and the

plaster has to be applied immediately after the application of

the bonding agent. Approved barnds for this are CERA CHEM /

NEROLAC PERMA / SIKA OR EQUIVALANT or appved by

engineering charge.

32 Providing & Applying 15mm.th .cement plaster in single coat

on brick / concrete walls similar surfaces for plastering &

finished even & smooth with a floting coat of cement slurry

mixed with admixture of lime of neeru in required 2500.00 sm 237.51

prooportion etc.comp.C.M 1:3(1 cement :3 sand) (A) For wall

and similar surfaces --Ground Floor

33 Providing & applying two coats of weather shield max paint (3

coats may be required

in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying

exterior acrylic primer coat as per manufacturers specification

and directions in shade

and colour approved by architects, on exterior surfaces of the

building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the

architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae 2500.00 S.M. 82.00

and flaking paint. This can be achieved by brushing with a

wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and defects

with white cement and

sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings

of paint must be thoroughly scraped off and Clean the surface

thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application

of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

EXECUTIVE ENGINEER

WEST ZONE (RANDER)

Contractor's Sign SURAT MUNICIPAL CORPORATION