WSS Rampur Town

Amount

Excavation in earth work and disposal of all excavated earth up to all leads and lifts, disposed earth to be levelled neatly dressed as per direction and to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:5:10 ( 1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete in all respect with in all leads & lifts and as per the direction & to the entire satisfaction of the Engineer-in-Charge.

Prov.form work with steel plates 3.15mm thick welded with angle iron frame 30 x 30 x 5mm so as to give a fair finish including centring, shuttering,strutting & propping etc. with wooden battens and ballies, height of propping & centering below supporting floor to ceiling not exceeding 4mtr.& removal of same for insitu rainforced concrete and plain concrete work complete in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge :-

Vertical surfaces such as walls ( any thickness ) partition and the like including attached pillasters buttresses, plinth and string courses and the like.

Taking out in horozontal layers of filtering media duly graded, screened, washed & cleaned as specified by engineer-In-charge

Top Layer:- Fine sand (eff. Size 0.20 mm to 0.40 mm & uniformity coefficient 2.00 to 3.00

2nd layer:- Coarse sand 3 mm to 6 mm

Fourth Layer:- Bazri 6 mm to 20 mm

Third layer:- Bazri 20 mm to 25 mm

Bottom Layer:- Broken stone 50 mm

Taking out precast conc. Block masonary in partitions walls 10 cm thich with solid block of approval size i/c quion block closer etc. complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Precast conc. Block masonary in partitions walls 10 cm thich with solid block of approval size i/c quion block closer etc. made of cement concrete 1:3:6 ( 1 cement: 3 sand :6 graded stone aggregate 40 mm nominal & down gauged ) in CM (1 : cement :3 sand) complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Providing & Placing in horozontal layers of filtering media duly graded, screened, washed & cleaned as specified by engineer-In-charge

Top Layer:- Fine sand (eff. Size 0.20 mm to 0.40 mm & uniformity coefficient 2.00 to 3.00

2nd layer:- Coarse sand 3 mm to 6 mm

Fourth Layer:- Bazri 6 mm to 20 mm

Third layer:- Bazri 20 mm to 25 mm

Placing in horozontal layers of filtering media duly graded, screened, washed & cleaned as specified by engineer-In-charge

Top Layer:- Fine sand (eff. Size 0.20 mm to 0.40 mm & uniformity coefficient 2.00 to 3.00

2nd layer:- Coarse sand 3 mm to 6 mm

Fourth Layer:- Bazri 6 mm to 20 mm

Third layer:- Bazri 20 mm to 25 mm

Bottom Layer:- Broken stone 50 mm

Removing Dry or oil bound distemper by washing and scrapping and sand papering the wall surface smooth including necessary repair to scratches complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. ..

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and incuding a priming coat with distemper priming of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer complete.in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge.

White washing with lime on undecorated wall surface two coats to give and even shade including throughly brooming the surface to remove the all dirt dust mortor dirt and other foreign matter complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Painting two coat (excluding priming coat ) on previously painted steel & other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt ,dust and and other foreign matter.complete.in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge.

Painting one coats(excluding priming coat) of approved make on new wood and wood based surface Painting and Polishing with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge.

Stone/ Boulder filling behind the R/Wall, also under Floor & Upstream of I/Gallary/ Under Floor etc. in all leads and lifrs and as per the directioin and to the entire satisfaction of the Engineer-in-Charge

Jagdish Bhaluni (BID ID -447667)