Addition alternation and Renovation of Doctor, Nurse and Staff Toilet at Balurghat District Hospital under Dakshin Dinajpur Electrical Division

Amount

Supplying and fixing double-door 2+8Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with supplying and fixing 10 Nos 240 V 6-32A SPMCB of breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection and Supplying and fixing 1 No 40A 240 V DPMCB Isolator on din rail of existing DBs and necessary connection. (Make- ABB / Seimens/ Legrand)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed] damages to original finish. (Avg,. Run 8 Mtr)

Supply & Fixing 300 mm (12 ") exhaust fan of following sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia incl. Supply & Fixing 12 " AL louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS . (Make -- EPC, Heavy duty)

Supply & delivery 250 volt. 4 ft. long Single / double LED Tube Light fittings incl. LED Tube of polycarbonate body complete with all accessories as per direction of EIC. (Make-Philips / Crompton / Wipro)

(i) TMC 502P 1xT-LED 22W P3242 with 01 No MAS LEDtube 1200mm 18W865 T8 I – 2100lm

Supply & Fixing of 9/10 Watt Pin Type LED Bulb (Make-Phillips-Model-Ace saver)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

i) 2 x 1.5 sqmm + 1 x 1.5 sqmm ECC

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST & CESS. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications. (iii) Necessary manufacturer's warranty certificate will have to be submitted during delivery of the material.

M/S B. K. DEY SARKAR (BID ID -5611541)

MILLENNIUM ENGINEERS CO OP SOCIETY LTD (BID ID -5611690)