Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75,982.25Accepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹76,057.81+₹75.56 (0.10%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | K.R.ANILKUMAR L2 | Anish L1 |
|---|---|---|---|---|---|
| 1.00maintenance | |||||
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 50 | kg | 174.8 ₹8,740 | 174 ₹8,700 Lowest |
| 1.00 | OD355028/2025-2026:Providing and fixing precoated aluminium trafford sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.46 mm (+0.046%), total coated thickness
with zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both
side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25
microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or
as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size
(5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding
the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 15.75 | sqm | 880.3 ₹13,864.73 | 880 ₹13,860 Lowest |
| 1.00 | OD314867/2025-2026:Engaging coolis for cleanig | 4 | Day | 974 ₹3,896 | 973 ₹3,892 Lowest |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 20 | kg | 160.5 ₹3,210 | 160 ₹3,200 Lowest |
| 1.00 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 7.8 | sqm | 1,089 ₹8,494.2 Lowest | 1,089 ₹8,494.2 Lowest |
| 1.01 | 50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | 36 | sqm | 714.6 ₹25,725.6 | 714 ₹25,704 Lowest |
| 1.01 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 8 | kg | 489.7 ₹3,917.6 Lowest | 490 ₹3,920 |
| 1.01 | OD351429/2025-2026:Aluminium plain sheet .0 4mm or nearset avilable thickness15cm over lap at both ends fixing with GI bolts and Gi washerers etc cutting bending and fixing | 11.85 | sqm | 692.8 ₹8,209.68 Lowest | 693 ₹8,212.05 |
Tender Value
₹84,517
EMD Value
₹2,113
Closing Date
7 Jan 2026, 3:00 pmClosed
ASSISTANT ENGINEER
OFFICE OF THE ASSISTANT ENGINEER,LID AND EW SECTION,PANDALAM THEKKEKKARA GP
2025 -26 Pandalam Thekkekara GP Project No. 260/26 - Maintenance of GLPGS Thattayil Orippuram
2025_LSGD_824052_1
S01/AE/LSGD/PTGP/2025-26
Open Tender
Civil Works - Buildings
Item Rate
360 days
PANDALAMTHEKKEKKARA
Please refer Tender documents.
8 documents required · 8 mandatory
₹555
Yes
₹2,113
Yes
7 Feb 2026
29 Dec 2025
9 Jan 2026
29 Dec 2025
7 Jan 2026
29 Dec 2025
maintenance
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
OD355028/2025-2026:Providing and fixing precoated aluminium trafford sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.46 mm (+0.046%), total coated thickness with zinc coating120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD314867/2025-2026:Engaging coolis for cleanig
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)
21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)
OD351429/2025-2026:Aluminium plain sheet .0 4mm or nearset avilable thickness15cm over lap at both ends fixing with GI bolts and Gi washerers etc cutting bending and fixing
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1381356.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1381356.xls
BOQ • 0.24 MB
FTGLPSORIPPURAM.pdf
Tender Documents • 0.25 MB
PRILIGOVTLPSORIPPURAM.pdf
Tender Documents • 0.26 MB
EPAYMENT.pdf
Tender Documents • 0.24 MB
SBDGLPSORIPPURAM.pdf
Tender Documents • 1.63 MB
INTEGLPSORIPPURAM.pdf
Tender Documents • 0.24 MB
AFFIGLPSORIPPURAM.pdf
Tender Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .