2021-2022 Sreedharipalam Motor Shed Mattisthapical

Amount

demolishing of old and construction of new pump house

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

20.1.1 : Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):400 mm dia piles

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

10.25.1 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.6.6.2 : Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

50.9.1.2 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) using good quality Pincoda wood

50.9.3.2 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in-charge. using Pincoda wood.

50.9.4.2 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Pincoda wood

50.9.6.2 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Pincoda wood 30 mm thick shutters

9.103 : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc . complete.

50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm

9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od675944/2020_2021 : White Cement washing TWO coat including all labour, material, conveyance , scaffolding charges etc complete.

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.71 : Lettering with black Japan pint of approved brand and manufacture

Electrical

od1209715/2021_2022 : Charges for disconnecting electrical supply lines from meter board to Main panel board carefully and dismantling the whole panel from wall without any damage and conveying the same to new pumphouse by lift and lead.

od1209756/2021_2022 : Charges for disconnecting electrical supply lines from TPN switch/ Static capacitor carefully and dismantling the whole from wall without any damage and conveying the same to new pumphouse by lift and lead.

od1209829/2021_2022 : Charges for dismantling the Sub panel board of vaccum pump set such as TPN switch, DOL starter, and capacitor etc. without any damage and conveying the same to new pumphouse by lift and lead

od1209830/2021_2022 : Charges for disconnecting electrical supply lines from Stator -Rotor Starter of 75 H.P motor and dismantling the same without any damage and conveying the same to new pumphouse by lift and lead.

od1209873/2021_2022 : Charges for dis connecting the electrical lines and detaching pipes and foundation bolts ,lifting the 5H.P Vaccum pumpset from position ,conveying the pump to new location with all lift and lead.

od1209874/2021_2022 : Charges for detaching the suction and delivery pipes and foundation bolts ,lifting the 75 H.P, H.S pumpset from position ,conveying the pump to new location with all lift and lead.

od1209875/2021_2022 : Charges for disconnecting electrical supply lines and eart leads from 75 H.P. motor carefully and detaching coupling set and foundation bolts from base frame and lifting the motor from position and conveying the same to new pumphouse by lift and lead.

od1210782/2021_2022 : Charges for dismantling the existing flanged M.S pipes and convey the same to new pump house with all lift and leads.

od1210783/2021_2022 : Charges for dismantling the existing flanged Sluice valve and Non -Return valve from pipe line and convey the same to new pump house with all lift and leads.

PART 2-REFITTING AT NEW PUMP HOUSE

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

od1219103/2021_2022 : cost of foundation bolts 16/12 mm dia

od1220728/2021_2022 : cost of foundation bolts 12/10mm dia <br>

14.8 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.7 : Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

od1222383/2021_2022 : Charges for installing the dismantled 5 H.P.Vaccum pumpset fixed on base frame , over the new foundation block in correct lines and levells, coupling together in correct alignment, and tightening all bolts and setting for trouble free opeation , including scrapping and painting with 2 coats of Sy. enamell paint.

od1222384/2021_2022 : Charges for installing the dismantled 75 H.P. motor pumpset fixed on base frame , over the new foundation block in correct lines and levells, coupling together in correct alignment, and tightening all bolts and setting for trouble free opeation , including scrapping and painting with 2 coats of Sy. enamell paint.

od1224564/2021_2022 : Refitting the dismantiled TPN switch of 75 H.P. pumpset at the required position, using anchor bolts etc, and attend all petty repairs if any required.

od1224565/2021_2022 : Charges fo refixing the Main panel board at the required location using necessary foundation bolts/ Anchor bolts after attending all loose contact defects and petty repairs etc. if any including painting..

od1224566/2021_2022 : Charges for refitting the dismantled flanged pipes with specials like bends, reducer etc . Using fresh rubber packing , grease, iron nut bolts in leak proof condition including painting with 2 coats of Sy. Enamel paint

od1224568/2021_2022 : Charges for installing the existing Sluice valve/ NR valve in position using fresh rubber packings , iron bolts, nuts etc in leak proof condition

od1225908/2021_2022 : Charges for re-installing all dismantled cables from MSB to switches, starters, and motors and giving all connections accordingly.

od1225909/2021_2022 : Charges for refitting the Metallic Energy meter board in position and clamping the lead cable to MS Board and setting all connection as required.

od1225910/2021_2022 : Charges for refitting the Stator -Rotor Starter of 75 H.P motor in position, checking all moving contacts, relays,etc . And setting into good working condition

od1225911/2021_2022 : ChargeCharges fo refixing the Sub panel board of vaccum pumset at the required location using necessary foundation bolts/ Anchor bolts after attending all loose contact defects and petty repairs etc. if any including painting..s fo refixing the Sub panel board of vaccum pumset at the required location using necessary foundation bolts/ Anchor bolts after attending all loose contact defects and petty repairs etc. if any including painting..

Bidder Name

Ajayakumar Associates