Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹36.4 LAccepted-AOC | L-1 | Accepted-AOC Lowest | |
| 2 | L-2₹39.1 L+₹2.7 L (7.40%)Rejected-AOC | L-2 | Rejected-AOC Other than lowest | |
| 3 | L-3₹39.7 L+₹3.3 L (9.02%)Rejected-AOC | L-3 | Rejected-AOC Other than lowest | |
| 4 | L-4₹40.1 L+₹3.6 L (9.88%)Rejected-AOC | L-4 | Rejected-AOC Other than lowest | |
| 5 | L-5₹40.4 L+₹4.0 L (10.9%)Rejected-AOC | L-5 | Rejected-AOC Other than lowest |
Tender Value
₹34.2 L
EMD Value
₹68,500
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
PROVN OF TOILETS AND BATHROOMS AT URI UNDER GE 969 EWS
2022_MES_530059_2
969/WS- /2022-23
Open Tender
Civil Works
Item Rate
180 days
GULMARG
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE 969 EWS
₹68,500
Yes
5 Sept 2022
19 Jul 2022
3 Aug 2022
19 Jul 2022
1 Aug 2022
27 Jul 2022
Amount
Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified.
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, and get out in soft soil / loose soil complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard / dense soil complete all as specified.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soils or hard/ Dense soil complete all as specified.
Removing Excavated soils exc 250m but not exc 500m and depositing where directed complete all as specified.
M&L for Hard core of guage exc 63mm but not exc 100mm, deposited, spared and levelled in layers n exc. 15 cm thick, watered and rolled / ramed complete all as specified.
Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded stone aggregate) in foundation, filling, and mass concrete complete all as specified.
M&L Plain Cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate as in benching bed plates coping and like, including use and waste necessary form work complete all as per specified and directed by Engr-in-charge.
M&L Reinforced cement concrete (Nominal Mix) type B-0 1:2:4 (12.5mm Crushed stone aggregate) in beams, cantilevers, bressummers, lintels etc. complete all as specified.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified.
M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified.
Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified.
M&L for rendering 15 mm thick on stone masonary surface or other than fair faces of brick work in cement mortar 1:6 complete all as specified.
M&L for preparing newly plastered surfaces of walls and applying two coats of distemper over a coat of primer complete all as specified.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified.
S & F second class soft wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.
S & F 35 mm thick second class soft wood plain, framed, panelled shutters (any number of panels), with panels of veneered particle board or plywood or bison board complete all as specified.
S & F 30 mm thick second class soft wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. for windows and ventilators complete all as specified.
Supply and fixing in opening, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, complete all as specified and directed.
Supply and fixing in the frame at site, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.
S & F Rolled Mild steel Channels,angles,or tee sections fixed indipendently,with out connecting plates of Fe 410-W(Gde-E-250) quality -A complete all as specified.
S & F plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk) forming holes, without anyattachment and fixing complete AFe-290 (Gde E-165) complete all as specified.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A) complete all as specified.
M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.
M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.
Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer.
M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
All as per item No 29.here in before in here but 6mm to 8mm dia .
All as per item No 29.here in before in here but 5mm dia and over utp to 10mm dia in stirrups, spacers and binders.
Cement Concrete Type B0 1:2:4 (using 12.5 mm graded aggregate) in lintel up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth course string courses, lacing courses parapets and railings up to 60cm in hight complete all as specified.
S&F 150 mm long MS barrel tower bolts stove enameled black with bright bolt complete all as specified.
S&F 100 mm long MS barrel tower bolts stove enameled black with bright bolt complete all as specified.
S&F 250mm long MS sliding door bolt with hasp, staple (bolt type)and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts complete all as specified..
S&F 100mm long medium weight, cold rolled mild steel Butt hinges complete all as specified.
S&F 75mm long medium weight, cold rolled mild steel Butt hinges complete all as specified.
S&F 125mm long MS pressed handle ovel type, stove enamelled complete all as specified.
S&F 150mm long MS pressed handle ovel type, stove enamelled complete all as specified.
S&F 4 mm thick Figured glass,pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified.
S&F mild steel plates wind ties for roof including securing bolts and work confirming to Fe-290 Gde E-165 complete all as specified.
100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate ) in sub bases of flooring / hard standing complete all as specified.
M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring complete all as specified.
M&L 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection complete all as specified.
M&L for screed bed or bedding layer of cement mortar 1:4 , 15 mm thick for laying floor finishes complete all as specified.
S&F coloured non skid ceramic tiles 300x300x7 thick , in flors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 for backing of Dado/ Skerting complete all as specified.
S&F Glazed ceramic tiles 450x350x7 thick , in dado / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L Chequred coloured tile size 250x250x22 mm with grey cement and pigment using table vibrator or equivlent as in jointed and pointed in neat cement slurry over and included 15 mm screed cement mortar (1:6) and pigment size conforming complete all as specified.
S&F Vitreous china sqatting pan 'Orrisa' pattern 580x440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified.
S&F PVC valveless,10 liters syphonic action cistern, low level, white, with inlet, ball valve, float and including brakets and connection to pipes complete all as specified.
S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified,
S & F Vitreous china urinal, full size Stall type flat back white (minimum), with grating and union for discharge pipe complete all as specified.
S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) complete all as specified.
S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms) complete all as specified.
S&F PVC floor trap, 75 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement, cement concrete 1:2:4 B-1 complete all as specified.
S&F 75mm bore PVC (SWR) bends any radius with providing acceess door complete all as specified.
S&F 75mm bore PVC (SWR) bends complete all as specified.
M&L for 75mm dia PVC (SWR) Pipe single socketed in any length with rubber joiunts fixed in walls complete all as specified.
M&L for 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints laid in trenches or in floors complete all as specified.
S&F 75 mm bore cast iron soil, waste and vent pipe single socketed in any length with rubber ring joints and fixed to wall complete all as specified.
S&F 100 mm bore cast iron soil, waste and vent pipe single socketed in any length with rubber ring joints and fixed to wall complete all as specified.
S&F 75 mm bore cast iron branch pieces single spigot and socket type with oval access door complete all as specified.
S&F 100 mm bore cast iron branch pieces single spigot and socket typewith oval access door complete all as specified.
S&F 75 mm bore cast iron ducks foot bends of any radius with oval access door complete all as specified.
S&F100 mm bore cast iron ducks foot bends of any radius with oval access door complete all as specified.
S&F PVC (SWR) 75mm dia vent cowl complete all as specified.
S&F PVC (SWR) 110/75 mm 'S' trap complete all as specified.
Perparation of new or previously untreated steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxied zinc chrome primer complete all as specified.
M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity all as specified in SSR Part I complete all as specified.
S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe complete all as specified.
S&F tube medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following sizes :-
15mm bore of pipe
20mm bore of pipe
S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes.
15mm bore
20mm bore
S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type complete all as specified.
S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified.
S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified.
S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for for iron pipe and fixed complete all as specified.
S&F 32mm waste coupling of PTMT complete all as specified.
Preparation of Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.
S & F Swivel shower of PTMT any colour for fixing with 15mm pipe (min wt 40gms) complete all as specified.
M & L LLDPE Septic tanks, 30 users exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete all as specified.
M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way.
One 3 pin 5 Amp switch socket outlet on same board.
One 3 pin 5 Amp switch socket outlet on independent board
S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.
S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.
S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universsal complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified.
S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.
S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.
S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-Charge.
S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified.
S&F LED Bulb 12 Watt complete all as specified.
M & L sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 2.5 sqmm cable and one run of casing capping shall be measured as one RM
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc.
M/s MOHD YAQOOB KHAN & CO
M/S S S TRADERS
M/S NISAR AND CO
M/S GHULAM QADIR WANI AND SONS
M/S GHULAM HASSAN MALIK
M/S IQ ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .