Extension of new HT/LT line by 200KVA and 100KVA sub-station with 11KV covered conductor 1Cx70mm2 to give three phase service connection to water innovative source and a water Boosting station at Tapsa Para

Amount

Supply of the following :-

9Mtr. Long Steel tubular pole

8 mtr. Long Steel tubular pole

Stay set complete

Stay insulator (HT)

Stay insulator (LT)

Stay wire

M.S. channel (100x50x50x6mm)

M.S. channel (75x40x40x6mm)

M.S. angle (65x65x6mm)

11KV Coverd Conductor(1Cx70MM2)

GI wire 8 SWG

DTR 100KVA 11/0.433 KV Coper wounded -Bis level 2Transformer

DTR 200KVA 11/0.433 KV Coper wounded -Bis level 2Transformer

11KV GOS 3post pole (polymaric )

11KV DOF (polymaric )

11KV LA (9KV 5KN)

11KV disc insulator(polymeric)

11KV disc fittings

11KV pin insulator (polymeric)

M.S Nuts and Bolts assortes size

Suspension clamp Assembly with straps & Buckle(25-50mm).

Dead end clamp Assembly with straps & Buckle (25mm-50mm).

Service line Anchor clamp (18-50mm).

Distribution box 3 phase (25-35/35-50mm)

pole clamp (25/50mm)

Insulation piercing connectormain 16-95 sq mm & Tap4

cable End cap (25-35/35-50mm)

Cable Ties

Eye Hook (25mm)

LT AB Cable 3 phase (3x70+1x50+1x16sqmm

Danger Plate

Erection of the following

9Mtr. Long Steel tubular pole

8 mtr. Long Steel tubular pole

Stay set complete

M.S. channel (100x50x50x6mm) (as requirement )

M.S. channel (75x40x40x6mm) (as requirement )

M.S. angle (65x65x6mm) (as requirement )

11KV Coverd Conductor(1Cx70MM2)

DTR 100KVA 11/0.433 KV Coper wounded -Bis level 2Transformer

DTR 200KVA 11/0.433 KV Coper wounded -Bis level 2Transformer

11KV GOS 3post pole (polymaric )

11KV DOF (polymaric )

11KV LA (9KV 5KN)

11KV disc insulator(polymeric)

11KV pin insulator (polymeric)

LT AB Cable 3 phase (3x70+1x50+1x16sqmm)

Danger Plate

Others

Suplly and Errection of High density polithene pipe

Suplly and Errection of Earthing with salt 60kg and charcoal 55kg equivalent to 2.5 Basta with Jig -Jag Hole in bottom portion of 2.0 my GI pipe in/c washers /Nuts and blots etc.in/c supply of HI pipe 40mm dia 2.5mtr. Long as per specification as per direction of TSECL

Cross -Arm Clamp

Stay Clamp

Suplly and Errection of Grouting with CC of Ratio 1:2:4( 1 cement concrete, A=600x600x630 (3.14x(165/2)sq x 630)=220108443.8sqmm B= 3.14x(420/2)sqx457-(3.14x(165/2)sqx457) =53516785.38sqmm A+B = 273624229.2sqmm = 0.273cum :2 Rover sand 4 jhama Brick Aggregate of 20 mm normal size ) including supply of cement sand and brick aggregate complete with excavation ,refilling of earth ramming along with centering shuttering as required @ 0.273 cum per steel tubuler pole as per TSECL specilications etc . and appluing paints with ready mixed printer (two or more coats and alluminium paint of approved quality to give an even shade etc. as required as per direction pf Engg-In-Charge.

Excavation coil earthing by 8SWG GI wire as per Technical specification

Cutting Clearing and disposal of jungle /tree of any girth from either side of HT/LT line from providing required vertical and horizental clearance as per provising of I.E rule

Fabrication of Steel Materials

Civil work for construction of Transformer base and fencing of hard drawn steel wire fabric as per requirement and direction of Engg. In charge

RATAN PAUL (BID ID -171629)