Construction Of Compound Wall & Landscaping Work at SE Bunglow at Alkapuri Vadodara, Dist Vadodara

Construction Of Compound Wall & Landscaping Work at SE Bunglow at Alkapuri Vadodara, Dist-Vadodara

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Demolition including stacking of sevicable materialsdisposal of 5.14 Cu.m. 932.65

unservicable materials wih all lead and lift.i) RCC Work

2 Demolition of Brick work and stone masonry including stacking 56.50 Cu.m. 564.16

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.(i) In Lime Mortar.

3 Excavation for foundation upto 1.5 m depth including sorting 153.68 Cu.m. 120.01

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

4 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 63.31 Cu.m. 3080.90

coarse sand : 6- hand broken stone aggregates 40 mmnominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

5 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 31.39 Cu.m. 4518.74

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete including cost of formwork and

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base or columns and Mass concrete

6 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 17.86 Cu.m. 10658.16

2- coarse sand : 4- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement

for R.C.C work in (B) COLUMNS: (ii) Having cross-sectional area

more than 0.08 Sq.M and upto 0.18 Sq.M

7 Providing and laying ordinary cement concrete 1:2:4 (1-Cement 18.38 Cu.m. 7665.60

2- coarse sand : 4- graded stone aggregates 20 mm nominal

size) and finishing smooth with,curing etc. complete including

the cost of formwork but excluding the cost of reinforcement

for R.C.C work in (A) BEAMS :(ii) Having crosssectional area

more than 0.08Sq.M and upto 0.12 Sq.M

8 Brick work using common burnt clay building bricks having 52.32 Cu.m. 4121.55

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)

(Conventional Brick).

9 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 4.72 Cu.m. 3993.11

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in Wall Caps /

Coping Terrace Lvl

10 Providing TMT Bar FE 500D reinforcement for R.C.C. work 6820.85 Kg. 77.29

including bending, binding and placing in position complete for

11 Filling available excavated earth (excluding rock) in 139.86 Cu.m. 133.65

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

12 20mm thick sand faced cement plaster on walls upto height 10 617.73 Sq.m. 337.52

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

13 Finishing wall with weather proof exterior emulsion paint on 634.54 Sq.m. 117.40

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

14 Steel work, riveted in built up sections framed work including 8.92 q 9108.48

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint. (A) In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common

rafters and the like.

15 Painting two coats (excluding priming coat) on new steel and 52.93 Sq.m. 90.00

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

16 Providing, supplying & Fixing of 610 mm Dia barbed Razor tape 150.00 RMT 354.51

concretia coil 10 mtr strechable, 80 corcles, 200 clips,

galvenized coil, thickness 0.47 mm ( +/- 0.05 mm ),zinc coating,

275 GSM witj 4 line of razor barbed Tape ( RBT ) Hot Dip

Galvenized wire, Dia 2.50 mm ( +/- 0.10 mm ), tensile strength

:135:155 kgs/mm2 ( Hard Wire ), zinc coating240 GSM with

related hardware etc comp. as per specification & sample

approved by PMC or engineer incharge

17 Pointing on brickwork with cement mortar 1:3 (1-cement : 3- 51.89 Sq.m. 98.66

coarse sand) (A) Flush pointing

18 Filling in foundation and plinth with murrum or selected soil in 986.59 Cu.m. 296.29

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

19 Providing and Laying ordinary cement concrete 1:2:4 (1- 2.52 Cu.m. 6304.20

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iv) Slabs having more than

cm and upto 15 cm.thickness

20 Providing 15mm thick cement plaster in single coat on Rough 16.81 Sq.m. 196.64

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand).Extra over items 58 to

for plastering on ceilings and sofits of stairs upto floor two level

instead of plastering on walls.

21 Supply and application of GRC Panel cladding includding CNC 12.24 Sq.m. 4545.00

cutting with necessary supportive structure ( 2" thick ) of

approved design with all labour cost , material, transportation

etc. Item to be approved by engineer incharge or consulting

22 Providing and laying Machine cut free edges machine polished 1.80 Sq.m. 3250.18

telephone black madras Granite stone slab 18mm (Average )

thick ( Single Piece not more than 150cm) for stair steps and

risers & Door/window frame as per design including full

moulded round front steps & 1cm nosing & necessary groove

on trads of steps ;laid on 20mm thick cement mortar 1:6 (

cement : 6 coarse sand ) jointed with gray cement sluury

including rubbing and polsihing etc. complete.

23 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 25.00 Sq.m. 1432.78

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed

with color cement slurry including finised with flush pointing &

cleaning the surface etc. complete for antiskit

24 Providing and fixing pre-cast Rubber Dye / steel Dye inter 364.59 Sq.m. 704.07

locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

25 Providing and fixing pre-cast concrete kerb stone of gray 244.95 RMT 370.68

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design and

including excavation for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc complete.

26 Providing and Plantation of Naylon Carpet ( Semi ) lawn, grass , 13350.00 Sqft 35.35

fresh garden soil , compost manure, mixing organic manure and

proper garden area cleaning, cultivationg, waste & debris

carting from site including free 5 months maintanance from

date of final completion of works includes all local, central

taxes, transportation, freable charges,loading. unloading,

conveyance to site etc complete as directed by engineer in

27 Supply saplings of (Jasud, Ixora, Ticoma 180.00 Each 45.45

Gaudichaudi,Gultora,conocarpus, Jetropha, Haemeliya,

Chandani, Mogaro,Galfemia, , Allamenda, Desi Gulab,

Euphorbia mili,Jasud Hybrid, Chandani double,

Madhukamini,Madhumalti, Ticoma Capensis, Ixora draft,

Nikadevia,Green/Red/Yellow Mendi, English Karen etc.) having

height of minimum 2.00 to 2.5 ft. and bag size is 8 inch x 10inch,

well branched,well established & free from disease at site as per

the instructions.

28 Supply saplings of champa (deshi),shrub,jasmine,areca palm 50.00 Each 808.00

having height of minimum 6 ft. and bag size is 15 inch x 16 inch,

well branched, well established & free from disease at site as

per the instructions.

29 Providing laying (to level or slopes) and jointing reinforced 140.00 RMT 356.73

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete.(C) 250mm

30 Providing laying (to level or slopes) and jointing reinforced 15.00 RMT 678.01

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared

for collar joints including testing of joints complete.(D) 300mm

31 Constructing brick masonry chamber for underground C.I. 7.00 Each 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets.

32 Constructing brick masonry chamber for underground C.I. 1.00 Each 7180.44

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

33 Providing and fixing 2000 ltr Syntax Pure Antimicrobial Water 2.00 Each 34173.35

Tank with Hard water softener including all material and labor

for fixing with existing pipe connection and intter connection

with other tank etc will all lead and lift.

34 (b) LED Bollard fittings of minimum height 600 mm & 32.00 Each 3161.30

dia.100mm having polycarbonate clear/milky diffuser mounted

on 3mm thick aluminium finished powder coated pipe with

base plate 160x160mm with erection by M8x75mm fastner with

required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-

35 Supplying and erecting Flexible PVC insulated multi strand multi 193.00 RMT 46.46

core 1.1 kv grade ISI marked copper wires of following size to be

erected as directed.(e) 1.50 Sq.mm 3 core round PVC sheathed

36 Providing and erecting ISI mark Medium class RIGID PVC PIPES 198.00 RMT 24.24

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in

approved manner as directed.(a)20 mm

37 Supplying and erecting approved make Conical Pole (Standard ) 15.00 Each 3955.16

Made from HR sheet steel. The pole should be made as per IS.

and shall be coated with hot dip galvanizing as per IS

2629/2633/4759 with required base plate and integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard

profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable terminationas erected on

suitable foundation (included) with necessary GI nut-bolts/J-

Bolts. as per details given by manufacturer considering site

requirement.The length of poles are as below.(A) 3 Mtr. Long

65mm Top X110 mm bottom dia,3mm thickness.

38 Supplying and erecting LED street light / Flood light fittings with 15.00 Each 4092.52

High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-

79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver

and accessories wired upto terminal block.IP 65.(i)20- 30W

39 Providing & laying approved make Double walled corrugated 180.00 RMT 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground /

road surface for enclosing cable.(A)50 mm outer dia

40 Making trench in soft soil of suitable width of 90 cm deep for 150.00 RMT 55.55

laying cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

41 Providing and erecting Pipe type earthing having 150 cms.long 15.00 Each 368.65

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

SWG earth wire.

42 For using salt and charcoal / coke as required for pipe type 15.00 Each 171.70

43 Providing and erecting Miniature circuit breaker single pole 6A 15.00 Each 112.11

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark.Cat.III

44 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 180.00 RMT 117.16

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing trench / pipe of

following size of cables.(A) 4 core 4 Sq. mm

45 Providing & erecting 415V MCB Four Pole Switch for Lighting 1.00 Each 578.73

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity.(a) 6 to 32 Amp.

46 Providing & erecting 240 V MCB double pole switch for lighting 1.00 Each 278.76

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity.(A) 6 to 32 Amp.

47 Providing and erecting Sheet Steel powder coated MCB 1.00 Each 702.96

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and horizontal

single phase outgoing (a) single door (IP-30) (iii)8 way

48 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 4.00 Point 375.72

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling

complete.Cat. III

49 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 1.00 Point 522.17

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(e) in existing pipe

erected flushed on wall/ceiling complete.Cat. III

50 Point wiring for on board Looped Plug with 6A Modular type 2.00 Point 257.55

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories.Cat. III

51 Providing & erecting Approved make Ceiling Fan with double 1.00 Each 2311.89

ball bearing ISI mark with Condenser 230 volt A.C.50 Hz

mm sweep complete having 3 blades aluminium body and blade

sets having ornamental design shanks , canopy erected with

earthing. [ Make shall be approved by Engineer in Charge]

52 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 1.00 RMT 108.07

M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing.

53 Supplying & erecting fan hook box of 10 mm M.S. round bar 1.00 Each 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

54 Supplying and erecting LED indoor fittings with LEDs of wattage 4.00 Each 295.93

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than

0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 % ( fitting required

LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(A) Tube Light with integral driver.(iii) 18-20 Watts,

Surge - 2KV,IP-20, conventional 4 feet

55 Providing and fixing 0.5 Hp Pressure booster pump of brand 1.00 Each 21048.40

equivalent to Kirloskar with automatic water level controller of

brand equivalent to Crompton including all electric wire and

connection material and labor for fixing with existing pipe

connection and tank etc with all lead and lift.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

Dy. Executive Engineer Executive Engineer

Irri. Project. Sub-Dn. No.21 Vadodara Irr. Div.

Vadodara Vadodara