Modification of vehicles procured for sanitation, electricity, water supply, and other essential operations under solid waste management.

TECHNICAL SPECIFICATION OF SS WATER TANKER MOUNTED ON TATA 510 SFC CHASSIS 1. Tank Capacity - 3000 Litres 2. Tank Material - Stainless Steel Grade SS 304, Food- Grade Quality 3. Sheet Thickness - 3mm SS 304 Plate 4. Baffle Plates - - Minimum 2 Nos, SS 304 anti-surge baffle plate of 2mm thickness 5. Mounting - Tank Securely Mounted on fabricated MS Channel (100X50X5)mm Sub-frame with heavy-duty U-Gasket 6. Manhole - 600mm dia SS 304 hinged manhole with locking arrangement and food-grade rubber gasket. 7. Water Level Indicator - Transparent external water level gauge 8. Filling Arrangement - Top filling through manhole with removable SS Strainer. 9. Outlet - 50 Mm (2”) rear outlet with heavy duty ball value. 10. Delivery Line - 75mm GI/SS delivery pipeline with suitable control value. 11. Pump - PTO/Engine driven delf- priming centrifugal pump having minimum discharge of 600- 900 LPM at rated head. 12. Suction Line - 75 mm suction line complete with SS foot value and strainer 13. Spray Arrangement - rear spray with control valves 14. Overflow pipe - 75 mm SS overflow pipe with splash guard.

TECHNICAL SPECIFICATION OF HOPPER TIPPER OF 3.5 CUM CAPACITY MOUNTED ON TATA 510 SFC CHASSIS 1. Volume - - 3.5 Cum Capacity 2. Hyd Cylinder for Tipper - 01 Nos, Hydraulic cylinder 3. Hyd System - Operated by Single Spool Direction value 4. Power Transfer - Through power Pack of Vehicle P.T.O 5. Tipping Angel - Approx 50 to 60 Degrees 6. Sub Frame - 100X50X5 mm MS Chanel 7. Windows for Garbage Filling - 04 Nos (2 on each side) 8. Waste Box - 2 Nos, boxes for Sanitary waste and domestic Hazardous 9. Floor - 3mm MS Sheet 10. Side, Front, Top & Tail Gate- 2mm MS Sheet 11. Hyd, Tank - 15 Ltr. Capacity 12. Painting - The Body shall be internally Plastic Coated black epoxy Paint to Safe guard the body form corrosion. The outside Surface Painting Shall be done with Enamel metal paint with Complete etc.

TECHNICAL SPECIFICATION FOR SKY LIFT OF 11 MTR WORKING HEIGHT MOUNTED ON TATA 510 SFC CHASSIS 1. Working Height - 11 miters 2. Outreach - 2.5 mtrs. (Approx) 3. Floor Deck - Made of 3mm thick MS Cheered Plate 4. Boom - 2 Nos of 4mm thick rectangle pipe 5. Control Values - Directional Spool Valves Provided in the working Cage as well at the floor deck for Hydraulic operations. 6. Safety Features - Over Load protection value. 7. Hydraulic System - Through Power pack or vehicle P.T.O 8. Hydraulic Motor - Danfoss/ M & S Make of Equivalent make 9. Slewing unit Gear Box - Reduction Work gear 10. Slewing - 360 degree Continuous in either direction 11. Hydraulic Cylinder - 02 Nos for booms and 02 Nos for Stabilizer 12. Hydraulic Pipe - High Pressure Rubber Hose pipe 13. Stabilizers - 02 Nos Hydraulic and A type 14. Max, Working load - 120 Kg 15. Bucket - Fiber Glass Bucket suitably reinforced capable of accommodation 01 persons with Tools and Spares.

TECHNICAL SPECIFICATION OF DEAD BODY VEHICLE MOUNTED ON MAHINDRA PICKUP (1.3 CITY MAXX) CHASSIS 1. Approx Body Size - 2500mm (L) X 1500mm (W) X 1800mm (H) 2. Bottom Floor - 3mm MS Chequered Sheet 3. Roof - 2mm MS Sheet 4. Side Panel - Transparent toughened Glass with Heavy- duty MS Frame 5. Front panel - MS Sheet with viewing window 6. Rear Door - Rolling Shutter Type with Central Locking System 7. Stretcher - Heavy- duty SS/MS Stretcher with Locking guide rails 8. Side table - Foldable side table 9. Interior - LED light and Washable Finish 10. Ventilation - Louvers with Insect mesh 11. Painting - Anti- corrosive primer+ two Coats Enamel 12. Ladder - Rear access ladder with anti-slip and safety handles 13. Accessories - Reflective tape, tool box, mud flaps, rear underrun guard 14. Tasting - Dimensional, Structural & leakage test Note :- Body shall be securely mounted on the departmental Mahindra Pickup Chassis, Chassis Technical Specification are excluded. Shall conform to relevant IS Standards and CMVR provisions.

TECHNICAL SPECIFICATION OF FODDER COLLECTION VEHICLE MOUNTED ON MAHINDRA PICKUP (1.3 CITY MAXX) CHASSIS 1. Vehicle Type - Fodder Collection Vehicle 2. Approx body Size - 2500mm (L) X1600 mm (W) C 1500 mm (H) 3. Body material - MS Fabricate Body 4. Bottom Floor - 3mm MS Sheet 5. Side Panels - 3mm MS Sheet 6. Roof - 1.5mm MS Sheet 7. Structural Frame - Heavy Duty MS Tubular Sections 8. Compartments - 06 Separate Compartments or Box Stainless Steel Grade SS 304, 9. Partition of Box Use - Grass, Dry Fodder, Roti, Vegetables, Choker & Mixed Feed. 10. Doors - Individual Side doors +Double Rear Door 11. Painting - Primer & Two Coats Synthetic Enamel 12. Accessories - Reflective tape, Tool Box, Mud flaps, Rear Underrun Guard. 13. Testing - Dimensional, Structural & Leakage Test. Note :- Body shall be securely mounted on the departmental Mahindra Pickup Chassis, Chassis Technical Specification are excluded. Shall conform to relevant IS Standards and CMVR provisions.

TECHNICAL SPECIFICATION OF COVERED BODY VEHICLE MOUNTED ON MAHINDRA PICKUP (1.3 CITY MAXX) CHASSIS 1. Vehicle Type - Covered Body Vehicle 2. Approx body Size - 2500mm (L) X1600 mm (W) C 1500 mm (H) 3. Body material - MS Fabricate Body 4. Bottom Floor - 3mm MS Chequered Plate 5. Side Panels - 2mm MS Sheet 6. Roof - 2mm MS Sheet 7. Structural Frame - Heavy Duty MS Tubular Sections 8. Boady Type - Fully Enclosed Weatherproof Cargo Body 9. Rear Door - Fully width double Rear Doors 10. Door Hardware - Heavy duty Hinger, Lever Lock & Rubber Beading 11. Interior - Smooth Finish 12. Painting - Primer & Two Coats Synthetic Enamel 13. Accessories - Reflective tape, Tool Box, Mud flaps, Rear Underrun Guard. 14. Testing - Dimensional, Structural & Leakage Test. Note :- Body shall be securely mounted on the departmental Mahindra Pickup Chassis, Chassis Technical Specification are excluded. Shall conform to relevant IS Standards and CMVR provisions.

TECHNICAL SPECIFICATION OF VEHICLE MOUNTED ON SWM MAHINDRA PICKUP (1.3 CITY MAXX) CHASSIS 1. Volume - - 2.5 Cum Capacity 2. Hyd Cylinder for Tipper - 01 Nos, Hydraulic cylinder 3. Hyd System - Operated by Single Spool Direction value 4. Power Transfer - Through power Pack of Vehicle P.T.O 5. Tipping Angel - Approx 50 to 60 Degrees 6. Sub Frame - 100X50X5 mm MS Chanel 7. Windows for Garbage Filling - 04 Nos (2 on each side) 8. Waste Box - 2 Nos, boxes for Sanitary waste and domestic Hazardous 9. Floor - 3mm MS Sheet 10. Side, Front, Top & Tail Gate- 2mm MS Sheet 11. Hyd, Tank - 15Ltr. Capacity 12. Painting - The Body shall be internally Plastic Coated Painted with black epoxy Paint to Safe guard the body form corrosion. The outside Surface Painting Shall be done with Enamel metal paint with Complete etc. Note :- Body shall be securely mounted on the departmental Mahindra Pickup Chassis, Chassis Technical Specification are excluded. Shall conform to relevant IS Standards and CMVR provisions.