Kakrapar Project

BILL OF QUANTITIES

Sign. of the Contractor Sign. of the Executive Engineer

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional, and are given

to provide a common basis for bidding. The basis of payment will be the actual quantities

of work ordered and carried out, as measured by the Contractor and verified by the

Engineer and valued at the rates and prices tendered in the priced Bill of Quantities, where

applicable, and otherwise at such rates and prices as the Engineer may fix within the terms

of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all constructional plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether quantities

are stated or not. The cost of Items against which Contractor has failed to enter a rate or

price shall be deemed to be covered by other rates and prices entered in the Bill of

Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in the

items provided in the priced Bill of Quantities, and where no Items are provided the cost

shall be deemed to be distributed among the rates and prices entered for the related items

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the contract

documentation shall be made before entering rates or prices against each item in the Bill

8. The method of completed work of payment shall be in accordance with the specification for

Road and Bridge works. For building works specifications for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required blasting,

or the use of metal wedges and sledgehammers, or the use of compressed air drilling

for its removal, and which cannot be extracted by ripping with a tractor of at least 150 kw

with a single rear mounted heavy duty ripper.

Sign. of the Contractor Sign. of the Executive Engineer

BILL OF QUANTITIES

Name of Work: Maintanance and repair work of Aradhna Building & Quarters behind

Aradhna Building

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Sr.No. Item of Work Qty with Unit Amount

Dismentaling tiled of stone floors

laid in mortar including stacking of

1 serviceable materilas and disposal 70.26 50.11 Sqm

of unserviceable materials with all

Removing dry or oil bound

distemper by a washing and

2 scraping and sand papering the 2623.84 11.87 Sqm

wall surface smooth including

necessary repairs to scratches

Removing and scraping of old

deteriorated plaster of any

thickness fromm wall / R.C.C

3 member including stacking of 291.39 20.55 Sqm

serviceable material and disposal

of unserviceable from site of work

with all lead and lif

Providing 20mm thick cement

plaster in single coat on single or

half brick walls for interior

4 plastering upto floor two level and 291.39 253.88 Sqm

finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-

20mm thick sand faced cement

plaster on walls upto height

metres above ground level

5 consisting of 12mm thick backing 620.20 347.42 Sqm

coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete

Sign. of the Contractor Sign. of the Executive Engineer

P & L 24" x 24" vitrified 8 mm thick

tile flooring over 20 mm (average)

base of cement mortar 1:6 (

cement: 6 coarse sand) on new

surface or fixing on existing

6 flooring by adhesive material 70.26 1092.37 Sqm

including dismentaling of existing

flooring and jointed with color

cement slurry including finised

with flush pointing & cleaning the

surface etc. complete for light

Distempeing (Two coats) with oil

bound washable distemper of

approved brand and manufacture

and of required shade on wall

surfaces to give an even shade,

over and including a priming coat

with alkali resistance primer of

approved brand after thoroughly

brushing the surface and other

foreign matter and also including

preparing the surface even and

sand parpered smooth.

Finishing wall with weather proof

exterior emulsion paint on wall

surface (two coats) to give an

8 required shape even shade after 1353.75 120.26 Sqm

thoroughly brushing the surface

to remove all dirt, and remains of

loose powdered materials.etc

Providing and laying marble stone

slab flooring over 20mm

(average)base of cement mortar

1:6 (1-cement : 6 coarse sand) or

coarse sand) laid and jointed with

gray cement slurry including

rubbing and polishing complete.

(A) Marble slab 25mm thick

Providing and fixing 35 mm thick

panelled ,glazed or panelled and

glazed shutters, for Doors

10 windows and clearstory windows 2.52 3301.85 Sqm

including black enamelled M.S.

But hinges with necessary screws.

(C) Hard board panels.

Sign. of the Contractor Sign. of the Executive Engineer

Providing and fixing PVC SWR

Nahni trap IS 14735 for drain -

mm diameter with jali of the

11 following nominal diameter of self 1.00 586.27 each

cleansing design with C.I scread

down or hinged grating including

the cost of cutting and making

good the walls.

Concealed cock 15 mm Heavy

C.P. Angle stop cock 15 mm Heavy

Providing and fixing chromium

plated brass half trun flush cock of

14 approved quality including fixing 1.00 263.77 each

in pipe line etc. complete.(ii)

Rupees Seven Lakh Two Thousand Eight hundred Twenty-five and Fifty-Five Paisa Only

I/We am/are willing to carry out the work at… ...................... % above/below percent (Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Note:-GST as per prevailing rate shall be paid Extra.

Sign. of the Contractor Sign. of the Executive Engineer