Construction of Snow Clearance Control Room at Tral.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER R AND B DIVISION AWANTIPORA.

Name of the Work: Construction of Snow Clearance Control Room at Tral.

Contract No:- 183/EEA/R&B of 2025-26/10496-10505 Dated:25-02-2026 (Advertised Cost : 240.30 Lacs including cost of GST {Base Contract Price = Rs.203.64 Lac + GST @18%= Rs 36.66Lacs } ) MH: CAPEX 2025-26 AAA order No: MHED/K/TS/01 Dated: 13.06.2025 and TS No: CE(R&B) SK/TS/309 of 2025-26 Dt. 16.02.2026.

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate (excluding GST) in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 CONSTRUCTION OF SNOW CLEARANCE CONTROL ROOM.

2 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : 0.999 cum 0.999 Excess(+) Full Conversion INR

3 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 0.000 100sqm 0.200 Excess(+) Full Conversion INR

4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 0.999 cum 0.200 Excess(+) Full Conversion INR

5 Providing and laying of GSB using nallah material for filling , including dressing of surface to required levels and grades. The work includes collection, carriage, and stacking of Nallah GSB from approved sources, spreading in layers not exceeding 225 mm in loose thickness, watering, and compacting with vibratory roller or any suitable means to achieve required compaction and level. The finished surface shall be firm and properly set for further construction activities. The rate includes mechanical lead upto 15km and head load upto 50mtrs. complete work in all respects as per the directions of the Engineer-in-Charge. 0.000 cum 0.600 Excess(+) Full Conversion INR

6 P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. 0.999 cum 0.799 Excess(+) Full Conversion INR

7 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat 0.999 cum 0.599 Excess(+) Full Conversion INR

8 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.999 cum 0.600 Excess(+) Full Conversion INR

9 Dry random rubble masonry with hard stone in foundation and plinth: With bond stone. 0.999 cum 0.199 Excess(+) Full Conversion INR

10 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.999 cum 0.799 Excess(+) Full Conversion INR

11 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.999 cum 0.000 Excess(+) Full Conversion INR

12 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.000 cum 0.399 Excess(+) Full Conversion INR

13 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.999 cum 0.799 Excess(+) Full Conversion INR

14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more 0.000 kgs 0.000 Excess(+) Full Conversion INR

15 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 0.999 sqm 0.200 Excess(+) Full Conversion INR

16 Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers. 0.000 sqm 0.399 Excess(+) Full Conversion INR

17 Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. 0.999 sqm 0.400 Excess(+) Full Conversion INR

18 Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. 0.999 sqm 0.000 Excess(+) Full Conversion INR

19 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure above plinth level upto floor five level 0.000 cum 0.599 Excess(+) Full Conversion INR

20 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) 0.000 cum 0.199 Excess(+) Full Conversion INR

21 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Imported Kail Wood 0.999 cum 0.999 Excess(+) Full Conversion INR

22 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.KD Wood 35mm. 0.000 sqm 0.799 Excess(+) Full Conversion INR

23 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineerin-charge :Imported Kail Wood 35mm 0.000 sqm 0.399 Excess(+) Full Conversion INR

24 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.4 mm thick glass pane (weighing not less than 10 kg/sqm) incl beeding for glass support. 0.999 sqm 0.399 Excess(+) Full Conversion INR

25 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm 0.000 each 0.999 Excess(+) Full Conversion INR

26 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm 0.000 each 0.000 Excess(+) Full Conversion INR

27 Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm 0.000 each 0.000 Excess(+) Full Conversion INR

28 Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm 0.000 each 0.999 Excess(+) Full Conversion INR

29 Providing and fixing ISI marked oxidized M.S. air hook with necessary screws 0.000 No. 0.999 Excess(+) Full Conversion INR

30 Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm 0.000 each 0.399 Excess(+) Full Conversion INR

31 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, 0.000 sqm 0.799 Excess(+) Full Conversion INR

32 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover 0.000 sqm 0.599 Excess(+) Full Conversion INR

33 Providing and fixing ball bearing for rolling shutters. 0.000 No. 0.399 Excess(+) Full Conversion INR

34 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 0.000 kgs 0.600 Excess(+) Full Conversion INR

35 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 0.000 sqm 0.399 Excess(+) Full Conversion INR

36 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) 0.999 sqm 0.799 Excess(+) Full Conversion INR

37 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) 0.000 sqm 0.600 Excess(+) Full Conversion INR

38 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 0.000 sqm 0.399 Excess(+) Full Conversion INR

39 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab over 0.5 sqm) 0.000 sqm 0.599 Excess(+) Full Conversion INR

40 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 0.000 sqm 0.600 Excess(+) Full Conversion INR

41 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 0.000 ltr 0.999 Excess(+) Full Conversion INR

42 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 0.999 sqm 0.399 Excess(+) Full Conversion INR

43 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm 0.999 sqm 0.200 Excess(+) Full Conversion INR

44 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. 0.000 sqm 0.799 Excess(+) Full Conversion INR

45 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 0.999 sqm 0.999 Excess(+) Full Conversion INR

46 Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) 0.000 sqm 0.199 Excess(+) Full Conversion INR

47 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. 0.000 No. 0.800 Excess(+) Full Conversion INR

48 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia 0.000 each 0.800 Excess(+) Full Conversion INR

49 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 0.000 No. 0.800 Excess(+) Full Conversion INR

50 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings 0.000 No. 0.799 Excess(+) Full Conversion INR

51 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA 0.000 No. 0.399 Excess(+) Full Conversion INR

52 Providing and fixing P.V.C. P & S Trap for water closet or wash basin including P.V.C waste fittings complete: 0.000 No. 0.799 Excess(+) Full Conversion INR

53 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe, 0.000 No. 0.799 Excess(+) Full Conversion INR

54 Providing and fixing of soil waste and vent pipes of approved brand(ISI Mark).

55 100mm 0.000 rmt 0.799 Excess(+) Full Conversion INR

56 75 mm 0.000 rmt 0.600 Excess(+) Full Conversion INR

57 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) 0.000 Rmt 0.800 Excess(+) Full Conversion INR

58 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe , 25mm OD(SDR-7.4) 0.000 Rmt 0.200 Excess(+) Full Conversion INR

59 Providing & Fixing following PVC fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge

60 Door Tee 100mm size 0.000 No. 0.799 Excess(+) Full Conversion INR

61 Door Tee 75mm size 0.000 No. 0.400 Excess(+) Full Conversion INR

62 PVC collar 100mm 0.000 No. 0.999 Excess(+) Full Conversion INR

63 PVC collar 75mm 0.000 No. 0.799 Excess(+) Full Conversion INR

64 PVC Reducer 100x75mm 0.000 No. 0.400 Excess(+) Full Conversion INR

65 Floor Trap 100 mm size 0.000 No. 0.800 Excess(+) Full Conversion INR

66 Plain Bend 100 mm size 0.000 No. 0.800 Excess(+) Full Conversion INR

67 Plain Bend 75 mm size 0.000 No. 0.599 Excess(+) Full Conversion INR

68 Door bend 100mm 0.000 No. 0.799 Excess(+) Full Conversion INR

69 Door bend 75mm 0.000 No. 0.599 Excess(+) Full Conversion INR

70 Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge

71 Coupling 0.000 No. 0.799 Excess(+) Full Conversion INR

72 Providing and fixing PTMT liquid soap container 0.000 No. 0.400 Excess(+) Full Conversion INR

73 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 0.000 No. 0.599 Excess(+) Full Conversion INR

74 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 200mm 0.000 No. 0.999 Excess(+) Full Conversion INR

75 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. 0.000 No. 0.000 Excess(+) Full Conversion INR

76 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 0.000 No. 0.399 Excess(+) Full Conversion INR

77 P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar , racold or equivalent. 0.000 No. 0.800 Excess(+) Full Conversion INR

78 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 0.000 No. 0.999 Excess(+) Full Conversion INR

79 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded 0.999 kgs 0.000 Excess(+) Full Conversion INR

80 P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.5mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). 0.000 sqm 0.799 Excess(+) Full Conversion INR

81 Carriages for Different Materials by MT

82 Crushed Aggregate Avg Lead of 15kms 0.000 cum 0.599 Excess(+) Full Conversion INR

83 Sand Avg Lead of 15kms 0.999 cum 0.599 Excess(+) Full Conversion INR

84 Bricks Avg Lead of 30kms 0.000 per No 0.999 Excess(+) Full Conversion INR

85 CONSTRUCTION OF COMPOUND WALLING

86 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : 0.000 cum 0.999 Excess(+) Full Conversion INR

87 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 0.000 cum 0.200 Excess(+) Full Conversion INR

88 P/L of stone soling incl. ramming,hand packing and all carriages, complete job in geocell,trenches,foundation etc. 0.000 cum 0.799 Excess(+) Full Conversion INR

89 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat 0.000 cum 0.599 Excess(+) Full Conversion INR

90 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.000 cum 0.600 Excess(+) Full Conversion INR

91 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.000 cum 0.000 Excess(+) Full Conversion INR

92 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) 0.000 cum 0.399 Excess(+) Full Conversion INR

93 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more 0.000 kgs 0.799 Excess(+) Full Conversion INR

94 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 0.999 sqm 0.200 Excess(+) Full Conversion INR

95 Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. 0.999 sqm 0.400 Excess(+) Full Conversion INR

96 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level 0.999 cum 0.599 Excess(+) Full Conversion INR

97 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) 0.000 sqm 0.399 Excess(+) Full Conversion INR

98 Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed 0.999 sqm 0.999 Excess(+) Full Conversion INR

99 Extra for fine chisel dressed Devri Stone in square or rectangular Pillars 0.999 sqm 0.600 Excess(+) Full Conversion INR

100 Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm. 0.999 sqm 0.799 Excess(+) Full Conversion INR

101 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 0.000 sqm 0.999 Excess(+) Full Conversion INR

102 Structural steel work in built up sections, framed work, for Gate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded 0.999 kgs 0.000 Excess(+) Full Conversion INR

103 Carriages for Different Materials

104 Crushed Aggregate Avg Lead of 15kms 0.999 cum 0.599 Excess(+) Full Conversion INR

105 Sand Avg Lead of 15kms 0.000 cum 0.599 Excess(+) Full Conversion INR

106 Bricks Avg Lead of 30kms 0.000 No. 0.999 Excess(+) Full Conversion INR

107 Design Supply, installation, Testing & Commissioning of Split type AC's.

108 Supply installation Testing & commissioning of hot and cold split type dual inverter compressor AC's of following capacities. the units shall be of remote controlled along with all the latest features that are in vogue in latest models like; remote controlled operation, controllable flap LCD, ON/OFF Timer etc. The job further includes fixing indoor unit on wall by using suitable clamps and outdoor units MS power coated wall stand, the job further includes all the allied works for complete commissioning of AC's like providing and laying of cooper tubing (less or equal to 3 metres) for carrying refrigerant, insulating copper pipelines with nitrile insulation, filling up with refrigerant gas. all tools, tackles and consumable items shall be arranged by the firm. the job includes providing and fitting of 25 mm dia flexible PVC conduit. Temperature range in cooling (46 to 18) degree Celsius and temperature range in heating (-15 to 24) degree Celsius. (Energy efficiency rated as 5 Star). Warrenty as per OEM. capacity (2.0 Tr) 0.000 Job 0.200 Excess(+) Full Conversion INR

109 Providing and fitting of extra copper tubing with insulation of following diameters

110 6.35/9.25 mm including 13 min nitrile insulation 0.000 RMT 0.199 Excess(+) Full Conversion INR

111 12.8/15.87 mm including 13 mm nitrile insulation 0.000 RMT 0.000 Excess(+) Full Conversion INR

112 ELECTRICAL and MISCELLANEOUS

113 SITC of Power supply cable 1.5 Sq mm, Single Core copper through already laid conduits. 0.000 RMT 0.999 Excess(+) Full Conversion INR

114 SITC of Power supply cable 6.0 Sq mm, Single Core copper through already laid conduits. 0.000 RMT 0.999 Excess(+) Full Conversion INR

115 Providing and fitting of 2 POLE MCB's of reputed make of capacities 6/10/16/20/25/32Ampere. 0.000 job 0.000 Excess(+) Full Conversion INR

116 Providing and fitting of 2 way PVC MCB boxes. 0.000 job 0.600 Excess(+) Full Conversion INR

117 Supply and installation of 25 mm PVC conduit including cutting the wall and making good the same foe recess conduits. 0.000 RMT 0.400 Excess(+) Full Conversion INR

118 SITC of 5KVA Automatic Voltage stabilizer Input Voltage(P-N): 100-240 V Output Voltage (P-N):220-240 V 0.000 job 0.000 Excess(+) Full Conversion INR

119 CONSTRUCTION OF Machine Drilled Deep Borewell.

120 Cost on account drilling of 150 mm diameter Bore well in all kinds of strata encountered during drilling by ODEX/DTH/Using air rotary unit and exploration of underground water by tapping sufficient aquifer zone upto desired depth. The job includes lowering of 150 mm MS pipe upto desired depth. The job includes cost of pipes and slotting of pipes as per the site requirement. The job includes cost all charges on account of using drilling accessories, slotting with tools, attachment bits, labours etc. and carriage of material up to the site of work. Etc. 0.000 Mtr 0.599 Excess(+) Full Conversion INR

121 Providing and laying of 40 mm GI riser Pipes or as per site requirement pipe along with elbows, nipples, sockets, reducers clamp whatever. 0.000 Mtr 0.399 Excess(+) Full Conversion INR

122 Harnessing of tube well by providing and installation of following electro mechanical equipment of standard quality Submersible pump motor (Thin haped) 2 HP 1 Phase as per requirement with motor control panel having delta starter fitted with MCCB etc. P/F of M.S gantry with chain pulley block 5 m High. All the equipment should be of standard quality and ISI mark supplied form standard manufacture 0.000 Job 0.800 Excess(+) Full Conversion INR

123 Providing and laying of Electric wire 2.5 sqmm as per requrement 0.000 Mtr 0.800 Excess(+) Full Conversion INR

124 P/F OF M:S Clamps of size (length 16 inch,6 mm50mm width each duly able to hold the rising main, including nuts and bolts and bore cap whatever required at the work site and other sanitary works 0.000 LSR 0.199 Excess(+) Full Conversion INR

125 S.I.T.C of 40 KVA Silent DG Set with AMF Panel & Allied Fittings.

126 Supplying, Installation, Testing & commissioning of 415 ±10%V input 3 phase 40 KVA air cooled/fluid cooled Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for name fitted in a pollution free acoustic enclosure canopy of he and IEC/IS 60034-1 for alternator suitably assembled quired size as per Ministry of Environment protection rule 1986 read with latest amendments. The DG Set is required to be fitted and tested on load at site. The DG Set shall have following specifications: The DG Set shall be able to operate at 1600 mtrs ASL (at actual site conditions) efficiently without causing any malfunctioning. The DG Set shall comprise of Diesel Engine and Alternator coupled together with heavy duty flexible coupling and mounted on M. S. Base Frame along with all standard accessories, Control Panel, Battery, M. S. Canopy, duly painted and conforming to noise reduction norms as per environmental protection rules 1986 as laid down by Ministry of Environmental (Protection) and Forest, read with GSR-371(E) Dated: 17-05-2002 at S. No 95 for emissions limits and GSR-371(E) Dated: 17-05-2002 at S. No 94 (Paragraph 1 and 3) for noise limits for the DG Set and as per the latest amendments if any.Besides the above works the D.G set shall be provided with 12 V; 150 AH Lead acid battery of reputed make fitted inside the D.G set Canopy along with necessary accessories like fuel tank (inbuilt) etc and battery charger of required capacity. DG Set should be rated for continuous duty with overload provision of 10% for the period not exceeding one hour in twelve hours. A) ALTERNATOR:-The alternator shall be self-excited, self-regulated for 40 KVA rating and shall be brushless, continuous duty. The alternator shall be screen protected drip proof enclosure, and horizontal foot mounted in double bearing construction. a) Rated Output: 40 KVA b) Rated Speed: 1500 RPM c) Efficiency at full load 0.8 P.f. = Not less than 86.00% or as per relevant IS code. d) Total distortion factor less than 3% e) Voltage: 415 V at 50 Hz f ) Class of Insulation: g) Enclosure: IP 23. or higher h) Governor = Electronic/Mechanical B). DIESEL ENGINE (Prime Mover) The Prime Mover shall be diesel driven to develop requisite BHP as per ISO-8528-part-I at 1500 RPM for the alternator rated as above with ambient temperature ranging from -10C to +45C with 70% humidity.Cooling System: Air cooled Method of Start: Electric Start with a Key. rated BHP: Suitable for 40 KVA output at NTP as per ISO-8528-part-1 The engine shall be fitted with following accessories: - Fuel Tank: The capacity of the fuel tank shall be so as to last shall be mounted on an angle iron frame of suitable height and for 12 hours of continuous running on full load. The fuel tank fabricated out of M.S. Sheet of 4 mm Thickness duly painted and fitted with connections for inlet, outlet and return and also to be provided with air vent, drain with valve, level indicator and fuel pipes complete in all respects. 2) Battery: Battery suitable for above capacity DG set.3) Starting System: Providing and Fitting of Terminals, Leads, C/W Charging Dynamo and fitted with 12 Volt Starting System. The system shall be able of starting of DG set with 20-30 Sec even in winter conditions with ambient temp down to -50C 4) Engine Instrument Panel: The Engine Instrument Panel shall be fitted with starting switch with keys, Lube Oil Gauge, Temperature & Pressure Gauge, Speedometer, Kilowatt Hour Meter etc and all other accessories as required. 5) Safety Control: The D. G. Set shall be provided & fitted with all the safety controls i.e. for Low lube oil Pressure indication switch, High water temperature indication, RPM Indication, water temperature indication, battery charging indication etc. 0.000 JOB 0.471 Excess(+) Full Conversion INR

127 S.I.T.C of 63 KVA Sub-Station along with L.T Network & other Allied items.

128 SITC of 63KVA, 11/0.433 kV, 3-phase Distribution Transformers with metalled Terminal Connectors Energy Level-2, (Al. wound upto VA, Cu wound for 260kVA or higher KVA ratings), and with LV Cable Box having detachable Al, Gland plate with LV Bimetallic hal connection suitable for vertical take off of cable. (X-mer without OCTG (Off Ckt Tap Changer). 0.000 No 0.290 Excess(+) Full Conversion INR

129 SITC of 11 kV Gapless Surge Arrestor, 9 kV, 10 KA, LA with polymer housing, Stn. Type 0.000 Set 0.400 Excess(+) Full Conversion INR

130 SITC of 11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical type 0.000 Set 0.599 Excess(+) Full Conversion INR

131 SITC of 11 kV Horn Gap Fuse Set 3 Phase 200A 0.000 Set 0.200 Excess(+) Full Conversion INR

132 SITC of 185mm single core Cable, 1.1kV Grade, XLPE Insulated Stranded Conductor FRLS type (44mtr for 1 Ckt) 0.000 Mtr 0.200 Excess(+) Full Conversion INR

133 SITC of 9 Mtr. Long Pole, (ST-410 SP33) 0.000 No 0.399 Excess(+) Full Conversion INR

134 SITC of 11kV Polymeric composite Dise Irisulator 12kV, min falling 7load 45kN, Lighting Impulse 75kV Positive and 80kV.Negative, creepage distance 320mm 0.000 Set 0.799 Excess(+) Full Conversion INR

135 P/F MS Channel/Angle/Flat of sizes Including clamps 0.000 Kgs 0.999 Excess(+) Full Conversion INR

136 P/F Galvanized Nuts and Bolte. 0.000 Kgs 0.199 Excess(+) Full Conversion INR

137 Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, Installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.6 mtr long as Per IS 1230.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per 18 2620/85, Ol nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC Slab cover. 0.000 No 0.799 Excess(+) Full Conversion INR

138 SITC OF 11kV Polymeric composite Pin Insulator 12kV, BRN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm 0.000 No 0.600 Excess(+) Full Conversion INR

139 P/F OF LTDB for 63 KVA DTR with, 100 Amp MCCB 3 P 16KA for Incomer & 100Amp MCCB 3P 18KA 1 No. & 63 Amp MCCB 3P 16 KA 1. Nos for outgoing Circuit 0.000 No 0.399 Excess(+) Full Conversion INR

140 P/F OF Wedge Connectors/PG Clamps 0.000 No 0.000 Excess(+) Full Conversion INR

141 P/F OF Danger Plates with Clamps 0.000 No 0.799 Excess(+) Full Conversion INR

142 P/F OF GI Barbed Wire for Anti Climbing with Clamps 0.000 Kgs 0.399 Excess(+) Full Conversion INR

143 P/L OF Cement bottoming 1:2:4 mix as per Standard 0.5cum/pole 0.000 No 0.400 Excess(+) Full Conversion INR

144 P/F OF Sundry Items like Aluminium lugs, Jumpers, Binding Tape.. 0.000 Job 0.199 Excess(+) Full Conversion INR

145 P/F OF Anti-Climbing Device with Clamps 0.000 No 0.600 Excess(+) Full Conversion INR

146 P/F OF LT shackles with Mukhi Clamps 0.000 Kgs 0.799 Excess(+) Full Conversion INR

147 P/L OF 50 mm ACSR Conductor 0.000 Km 0.399 Excess(+) Full Conversion INR

148 Providing OF Suspension/Tension Clamp with eye hook 0.000 job 0.199 Excess(+) Full Conversion INR

149 Earthing of poles Complete by Gl Pipe 40 mm 3 mtr long through Ol Strip 26x3 mm 0.000 No 0.399 Excess(+) Full Conversion INR

150 P/F OF LT Line Spacers 0.000 No 0.399 Excess(+) Full Conversion INR

151 P/F of Al ladder 18 feet long along with 15 feet long link roads and HT glove pairs (1 no each) 0.000 job 0.399 Excess(+) Full Conversion INR

152 Installation, testing, & commissioning of 50 KVA stabilizers Including all allied electrical accessories stabiliser should have following specifications: a) Input: (90-260) V AC P-N; (150-460) V AC P-P b) Capacity: 15 KVA, 3-phase unbalanced type c) Output: 415V±1%-- phase to phase d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oll cooled I) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous.4 hours k) Waveform distortions: NII l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) other features: LED Indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement. The Job also includes P/F of 63 Amp 4 Pole MCCB as Incomer to the Servo Stabilizer to be provided in CBC Enclosure 0.000 job 0.090 Excess(+) Full Conversion INR

153 Supply, Installation, Testing & commissioning of 1000VA Full Sine wave power Inverter Including Providing /Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. with 2-core 6mm² Cu wiring as per site requirement along with other accessories like S5-Combine (02 No's), 3-pin plugs etc of reputed make for proper fitment and installation of the item. 0.000 job 0.600 Excess(+) Full Conversion INR

154 SITC OF 3 Phase 4 wire prodigy meters of suitable capacity for 63 KVA substation, 415 volt 50 Hz with all accessories and fittings, cabling required as per site requirement. The job Includes complete charging of substation and getting clearance from KPDCL and sealing of the meter 0.000 Job 0.200 Excess(+) Full Conversion INR

155 Electrification facility to Office Building cum Mechanical Bays at Machanical Field Sub-Control Room

156 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/eq. standard make as desired by engineer incharge ) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.), modular plate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 0.000 Point 0.999 Excess(+) Full Conversion INR

157 Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire , FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit. 0.000 Mtr 0.399 Excess(+) Full Conversion INR

158 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,modular plate, suitable GI box , connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.) 0.000 Each 0.399 Excess(+) Full Conversion INR

159 Wiring for lighting circuits/ 6- 10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/ equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 0.000 Mtr 0.399 Excess(+) Full Conversion INR

160 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /ABB Tvisha make.) 0.000 No. 0.399 Excess(+) Full Conversion INR

161 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 0.000 No. 0.400 Excess(+) Full Conversion INR

162 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP M.C.B, "C" curve including connections, painting etc. as required. 0.000 No. 0.799 Excess(+) Full Conversion INR

163 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/ Anchor/ equivalent as directed by engineer incharge.), single core cable in surface/ recessed medium class PVC conduit as required.

164 (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 0.000 Metre 0.400 Excess(+) Full Conversion INR

165 ( c ) 2 X6 sq. mm + 1 X 6 sq. mm earth wire ( submain for emergency circuit) 0.000 Metre 0.599 Excess(+) Full Conversion INR

166 ( d )2 X 10 sq. mm + 1 X 6 sq. mm earth wire ( Lighting submain) 0.000 Metre 0.399 Excess(+) Full Conversion INR

167 (e) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire ( Heating Submain) 0.000 Metre 0.799 Excess(+) Full Conversion INR

168 Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty , paint, complete

169 25mm 0.000 Mtr 0.999 Excess(+) Full Conversion INR

170 Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends. 0.000 Each 0.000 Excess(+) Full Conversion INR

171 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 0.000 Each 0.000 Excess(+) Full Conversion INR

172 Supply installation testing and commissioning of Indicator of Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia /Crabtree athena make.) 0.000 Each 0.600 Excess(+) Full Conversion INR

173 Sub Head-2 - Fixtures and Fittings

174 Supply installation testing and commissioning of 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux/Wipro make / sample to be approved before installation.. 0.000 No 0.199 Excess(+) Full Conversion INR

175 S/F testing and comm. Of 20 Watt 4 ft. wall mounted LED batten with powdered coated aluminum housing & integrated electronic driver with THD<10%.( commercial series) Philips / Trulux/ wipro make/ eq. standard make as directed by engineer incharge. 0.000 No 0.399 Excess(+) Full Conversion INR

176 Supply, Installation, Testing and Commissioning of 1200 mm sweep, decorative ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete . USHA Striker/Havells Oyster matalic/Crompton flavia make ( sample to be approved before installation) 0.000 No 0.600 Excess(+) Full Conversion INR

177 Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor roma plus/Legrand Mylinc /ABB Tivsha/schneider Livia /Havell Coral make. 0.000 No 0.399 Excess(+) Full Conversion INR

178 Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /USHA/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections. 0.000 No 0.800 Excess(+) Full Conversion INR

179 Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( legrand/ Shinider/Hager make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

180 6 way (4 + 18), Double door 0.000 No 0.599 Excess(+) Full Conversion INR

181 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,( Havell/ legrand/ Shinider/SSK make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

182 2 + 12 way, Double door 0.000 Each 0.600 Excess(+) Full Conversion INR

183 S/F testing and comm. Of MCB's 10 K of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ ABB ./equivalent make as directed by engineer incharge.

184 a) 6-32 Amp SP MCB 0.000 No 0.600 Excess(+) Full Conversion INR

185 b) 40-63amp DP MCB 0.000 No 0.799 Excess(+) Full Conversion INR

186 Providing of Chemical earthing as per IS standards by way of digging 10' deep pit then embedding 3 meter G.I Earthing electrode , 80mm dia. connecting the plate with main control board by8- 10 SWG G.I wire with 1/2" dia. Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. 0.000 job 0.000 Excess(+) Full Conversion INR

187 S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.

188 c)70 sq.mm 3.5 core 0.000 mt. 0.599 Excess(+) Full Conversion INR

189 Earth work excavation for cable trench, 2 ft deep with an average breadth of 1.5ft and refilling of trench with excavated earth after laying of cable and ramming it properly excluding cost of cable.the job also includes laying of warning tape . 0.000 mt. 0.199 Excess(+) Full Conversion INR

190 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

191 160 mm dia (OD-160 mm & ID-135 mm nominal) 0.000 Metre 0.800 Excess(+) Full Conversion INR

192 Supply installation testing and comm. of flood light 50 W ( warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07, , with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD, toughned glass and secondary lens,Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Preferred make: Philips/ Havell /Wipro/Crompton make. the job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job. 0.000 No 0.799 Excess(+) Full Conversion INR

193 Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 0.000 CFT 0.999 Excess(+) Full Conversion INR

194 Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.

195 Normal INCOMING:

196 a)160A 4P MCCB 25 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. 0.000 Nos 0.999 Excess(+) Full Conversion INR

197 b) 4 No. of Aluminium Bus Bar of 300 Amp. 0.000 SET 0.799 Excess(+) Full Conversion INR

198 c)Digital meters and phase indicators -1 set. 0.000 SET 0.000 Excess(+) Full Conversion INR

199 d) onload Change over switch 100 Amp for generator.Front operated. 0.000 No. 0.199 Excess(+) Full Conversion INR

200 e) 4 No. of Aluminium Bus Bar of 200 Amp. 0.000 SET 0.799 Excess(+) Full Conversion INR

201 c)Digital meters and phase indicators -1 set. 0.000 SET 0.000 Excess(+) Full Conversion INR

202 Inverter Incommer

203 (a) 100 amp DP MCCB 16 K including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB make. 0.000 No. 0.799 Excess(+) Full Conversion INR

204 (b) 200 Amp 2 strip bus bar 0.000 SET 0.600 Excess(+) Full Conversion INR

205 c)Digital meters and phase indicators -1 set. 0.000 SET 0.000 Excess(+) Full Conversion INR

207 c) 40-63amp DP MCB 0.000 No 0.799 Excess(+) Full Conversion INR

208 c) space for 12 way MCB's 0.000 job 0.600 Excess(+) Full Conversion INR

209 Supplying,Installation,Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical 0.000 No. 0.600 Excess(+) Full Conversion INR

210 S/I testing and comm. Of three phase 15 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/Chinar/ Electricfield make) having an input voltage ranging from 156V to 415 V ( phase to phase) and balanced output voltage of 415V, +/- 1%. ( Test certificate to be provided by the manufacturer) The unit incorporate

211 a) 0-500V moving iron type voltmeter with selector switch.

212 b) A three phase change over switch to read voltage on incoming and output side

213 c) indicating lights 6 No two numbers for each of the motorised units, one for lower limit and other for higher limit.

214 d) six push button control for movement operation of three motorised dimmer units two for each unit i.e one for raise operation and one for lower operation under the conditions of adjustment of auto/mannual selector switch (DPDT)

215 e) Single phase Preventer ( contactor Switch of required rating) Legrand make.

216 f) six potential meter resistance with lock meter two for each phase control, one for sensitivity and other for level control.

217 g) two sets of indication lamps three numbers each to indicate output and input indication

218 h) 20 % over load bearing capacity for one hour. 0.000 No 0.690 Excess(+) Full Conversion INR

219 Supply installation testing and commissioning of Sine Wave Inverter Capacity 5 KVA, Rated Power 4000 W, along with Four number invertor battery 150 AH/12 V Exide invatubular/ equivalent make,24 Month Warranty Safe for sensitive appliances with Sine wave out-put, Inverter should run heavy loads like AC, Geyser, Photocopiers, Auto over-load handling capacity Installation and maintenance friendly Offers high quality and reliable power back-up solution for office and homes ,MCB for protection from Input mains,Bypass switch for supplying output directly from grid in case of Home UPS fault.Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery status, etc.Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc.Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%.Supports a wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF).praffered make Luminous/ Microtek/Exide make. the job also includes, Supply and fabrication of angle iron stand of Structural steel work in built up sections, and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 0.000 No 0.090 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information