Erection of 02 High Mast Lights at Bipin Rawat Stadium Baramulla

Cables

Supply and laying of following sizes 1.1 KV XLPE insulated cable with conductor, PVC inner sheathed, overall PVC sheathed stranded and twisted cable in conformity to the technical specification and as per latest IS - codes.

Supply and laying LT 4CX 25sqmm Armoured AL cable

Supply and laying LT 4CX 16sqmm Armoured AL cable

Supply and laying LT 3.5CX 50sqmm Armoured AL cable

Supply and laying HT ABC 35sqmm Cable

HDPE Pipe

SITC of OD 65MM HDPE Pipe

Cable Termination including cost of Cable Glands etc required for Commissioning of following cable

4CX 16sqmm Armoured AL cable

4CX 25sqmm Armoured AL cable

3.5CX 50sqmm Armoured AL cable

Earthing

Supply and lying of manual Earthing Station in Chemical Earthing GI to GI 50mm dia x 2 Mtr Long with complete accessories

Providing and fixing 25 mm X 3 mm G.I. strip from earth electrode, as required.

High Mast

Design, Supply, Installation, Testing & commissioning of Motorised Hot dip Galvanised Stadium High masts with frame suitable for mounting up to 20 nos of LED Flood lights as per specification given above . The height of the mast from base to top of head frame shall be 25 Mtrs. As per Approved drawings. Price shall include LED Aviation Light.

Design and Construction of Foundation

Soft soil Digging and resurfacing price per meter

Feeder Piller High mast

Supplying, installation, testing and commissioning of Outdoor Type High mast Lighting Panel made out of MS Sheet steel 14/16 SWG duly powder coated suitable for 415 volt, 3 phase, 4 wire 50 HZ AC supply system having extensible type TPN aluminium alloy bus bar of high conductivity, with base frame of M.S section of suitable size, copper earth bar of size 25mmx 3mm at

the rear with lockable arrangement, complete with control wire, cable alleys, cable gland plates, including following items mentioned below.

INCOMER:-

1 No. 63A, TPN MCB (10kA)

1 Set phase indication lights (R, Y, B) Solid state type (LED)

OUT GOINGS:-

1 No 32A TP

2 No. 6A SPN (Including Aviation Light)

2 No Contactor 12A TP

1 No Contactor 16A 4P

1No Thermal Overload Relay including 2 NO/ NC & NO/NC

Main Panel

Push Button for Lowering/Raising of Frame of Mast Lights

the rear with lockable arrangement, complete with control wire, cable alleys, cable gland plates, including following items mentioned below.

Supply ,Installation, testing and commissioning of High mast Lighting Panel suitable for 415 volt, 3 phase, 4 wire 50 HZ AC supply system, fabricated in compartmentalized design from MS Sheet steel 14/16 SWG duly powder coated for gland platees, including cleaning having extensible type TPN aluminium alloy bus bar of high conductivity, with base frame of M.S. section of suitable size, copper earth bar of size 25mmx 5mm at the rear with 2 nos earth stud, complete with control wire, cable alleys, cable gland plates, including following items mentioned below. The panel should be suitable for Pedestrail mounting type 500mm above ground level with necessary base frame.

1 No. 63A, TPN MCB (10kA)

1 No. 125A, TPN MCCB (16kA) with thermo magnetic releases and all required accessories.

200A, TPN Bypass Changeover

Outgoing

4 Nos. 63A TPN MCB (16kA) C Curve

40kVA 3 Phase, 50Hz, Copper Wound, ONAN Cooled, Unbalanced Type, Indoor Servo Voltage Stabilizer for Input Voltage variation of 190 - 470V (Phase to Phase) and Output Voltage of 415V +/- 1% Volt (Phase to Phase). Digital Microprocessor Based control Card, Automatic/Manual Control Mode, Operating Temprature -15Degree to 55 Degree with a correction speed of 60V/Sec. The Servo Stabilizer should confirm to IS-9815 (Part-1) 1994 ammended upto date.

Services