CERTAIN REPAIRS TO SANITARY PLUMBING MISC BR ITEMS AND INTERNAL ELECTRIFICATION TO MD ACCNS OF TYPE III AND JCOs QUARTERS OF CQA ICV AND MES UNDER AGE I FY EDDUMAILARAM

Amount

Dismantling of Brickwork or stone/boulder masonry, build in lime or cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4) complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete all as specified and directed

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement compound complete all as specified.

M & L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/facia/ chajja etc. in cement mortar (1:3), (without using extra cement) complete all as specified and directed

M & L for 50 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection complete all as specified and directed

Dismantling floor, hearth or wall tiling and granite stone etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for First quality, non-skid ceramic, 7-8 mm thick colored tiles, area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, in floors etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete all as specified and directed. MAKE OF CERAMIC TILES: BELL, KAJARIA, NITCO, SOMANY. MAKE OF GROUT: WEBER (SAINT-GOBAIN), Dr FIXIT, SOMANY.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished even and rough complete all as specified and directed

M&L for first quality, glazed ceramic, straight cut/edge, joint free, colored 6-7mm thick tiles of size exceeding 0.08 sq.m but not exceeding 0.16 Sq.m each on vertical surfaces such as dados etc over & including 10 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete, all as specified. MAKE OF CERAMIC TILES: NITCO, KAJARIA, BELL, SOMANY. MAKE OF GROUT: BAL ENDURA, WEBER (SAINT-GOBAIN).

M & L for First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.18 sq.m but not exceeding 0.38 Sq.m, in floors etc. over 15mm thick 1:4 cement mortar screed, set and jointed with grey cement slurry & pointed with grout of matching shade,complete all as specified and directed MAKE OF CERAMIC TILES: BELL, KAJARIA, NITCO, SOMANY. MAKE OF GROUT: SOMANY, WEBER (SAINT-GOBAIN), Dr FIXIT.

M & L for First quality, non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.18 sq.m but not exceeding 0.38 Sq.m, in skirting etc. over 15mm thick 1:4 cement mortar screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete all as specified and directed MAKE OF CERAMIC TILES: BELL, KAJARIA, NAVEEN, NITCO, SOMANY. MAKE OF GROUT: SOMANY, WEBER (SAINT-GOBAIN), Dr FIXIT.

M & L for Granite jet black shade, 15-18 mm thick, machine cut, machine polished, bedded and jointed with adhesive on verticle surfaces suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:3), complete all as specified. MAKE OF ADHESIVE & GROUT: BAL ENDURA, WEBER (SAINT-GOBAIN).

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete complete all as specified and directed

Demolition of cement concrete (un-reinforced) in otherthan ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete

Taking down,resecuring or easing and adjusting shutters in the same opening of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, complete all as specified.

M &L for Three coats of white washing on new/ undecorated wall surfaces, including preparation of surfaces, complete all as specified and directed .

M &L forThree coats of white washing on ceiling surfaces including preparation of surfaces, complete all as specified and directed

M &L forTwo coats of cement base paint on new wall surfaces over a coat of preparation including preparation of surfaces complete all as specified and directed

M &L for Two coats of OBD on new wall surfacesover a coat of primer, including preparation of surfaces, complete all as specified and directed

M &L for Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanized wire staples, if required, complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified.

M &L for Plain Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips, in squares not exceeding 0.5 Sq. mm in each pane, complete all as specified. MAKE: MODIGUARD, SAINT-GOBAIN.

M &L for Figured glass, 4 mm thick, pin head type and glazing with linseed oil pane putty & spring glazing clips, in squares not exceeding 0.5 sq. m in each pane, complete all as specified. MAKE: MODIGUARD, SAINT-GOBAIN.

Disconnecting and taking down, water storage tanks of any description of capacity exceeding 500 litre but not exceeding 1000 litre and setting aside for refixing or removing to store etc. complete all as specified.

S & F Polyethylene water storage tank cover 500 to 1000 litre capacity and fixed in position IN REPAIR, complete. MAKE: SINTEX, AQUAPLUS, DIPLAST.

S & F 500 litre capacity, double layered polyethylene water storage tanks (cylindrical vertical with threaded closed top) including hoisted and fixed in position, making connections, complete all as specified. MAKE: SINTEX, AQUAPLUS, DIPLAST, GANGA.

M & L for Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. MAKE: SANT, BIR, LEADER, NETA, UTAM, KIRLOSKAR.

M & L for Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIR, complete all as specified. MAKE: SANT, BIR, LEADER, NETA, UTAM, KIRLOSKAR.

S&F in repair vitreous china wash basin white flat back size 550 x 400 including brackets, including cutting for and pinning in ends of bracket or erecting stand fixing of waste pipe etc complete

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)complete all as specified.

S & F in repairs PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush type, ISI marked (IS: 7231) with flush pipe, IN REPAIR, complete with all fixing arrangements. MAKE: HINDWARE, PRAYAG INDIA, CERA.

S & F Swivel shower of PTMT with shower arm 15mm size,195 mm long with bend of 45 degree with flange of PTMTany colour for fixing with 15mm pipe (Minimum weight 40 gm) IN REPAIR, complete all as specified. MAKE: PRAYAG equivalent in POLYTUF

S & F PVC waste pipe 600 mm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified. MAKE: PRAYAG Cat No. 327 or equivalent in POLYTUF

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified. MAKE: PRAYAG, POLYTUF

Demolition and breaking up drain pipes exceeding 50 but not exceeding 160 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, including PCC bedding as required and haunching, complete all as specified

S & F PVC (SWR) pipes, 110 mm external dia, type-A, ISI marked (IS:13592), single socketed in any length with rubber joints, fixed to walls with uPVC brackets/clips IN REPAIR, complete all as specified. MAKE OF PIPE: DIPLAST, PRINCE, SUPREME.

S & F PVC bends/shoes suitable for 110 mm external dia, type-A pipes, ISI marked (IS:13592) IN REPAIR, complete all as specified. MAKE OF PIPE: DIPLAST, FINOLEX, PRINCE, SUPREME.

S & F PVC (SWR) pipes, 75 mm external dia, type-A, ISI marked (IS:13592), single socketed, in any rubber ring joint laid in floor etc complete all as specified. MAKE: DIPLAST, PRINCE, SUPREME.

S & F PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size IN REPAIR, complete all as specified. MAKE: SUPREME, FINOLEX, PRINCE .

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S & F Bib taps, cast copper alloy, screwed down, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified. MAKE: SANT, BIR, LEADER, NETA, UTAM.

S & F Angular stop valve/cock, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified. MAKE: PARYAG Cat No.PR-144 or equivalent in, ESSCO, CZAR (SUPER).

S & F Pillar tap of PTMT, fancy type, any colour high pressure screwed suitable for 15 mm bore iron pipe and fixed (Minimum weight 120 gm) IN REPAIR, complete all as specified. MAKE: PRAYAG equivalent in POLYTUF

Cutting chases, pinning in brick wall. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

S & F Steel tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified. MAKE OF PIPE: JINDAL, BST, TATA, ZENITH.

S & F Steel tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified. MAKE OF PIPE: JINDAL, BST, TATA, ZENITH.

Taking down carefully Aluminium/copper point wiring (Light/ Fan/Socket or power) complete incl fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and directed.

Taking down main switch/MCB DB by disconnecting the electric supply all as directed at site.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FR in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed for One light/fan/exhause fan point controlled by one way 5 Amp switch

All as per Item No. 55 here in above for One 3 pin/5 pin socket out let 5 Amp on independent board

All as per Item No. 55 here in above for One 3 pin/5 pin socket out let 5 Amp on same board

All as per item No 55 here in above above but independent point wiring with stranded copper conductor 2.5 Sqmm (Nominal Area) PVC insulated and unsheathed cable and one 2.5 Sqmm multistranded copper conductor PVC insulated unsheathed green in colour as earth continuity all as specified and directed

S&F switch piano, flush type 5 Amp single pole one way complete all as specified and directed .

S&F socket out let, flush type 5 Amp complete all as specified and directed .

S&/F switch piano, flush type 15 Amp complete all as specified and directed .

S&/F socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type complete all as specified and directed .

S&F lamp holder insulated body any type with back plate suitable for batten/angle fittings complete all as specified and directed .

S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified.

S&F stepped type Electronic fan regulator, 230 V, flush type complete all as specified and directed.

M&L for repairs/Rewinding unserviceable of ceiling fans, (rewinding (copper) and replacement bearings in existing old ceiling fans) of 1400mm/1200 mm sweep, suitable for working on 230 volts, 50 Hz single phase supply including complete overhaling by provision of capacitor connecting box,connected wiring etc.complete all as specified and as directed

M&L for repairs/Rewindingof unserviceable exhaust fans, (rewinding (copper) and replacement bearings in existing old exhaust fans) of 300mm/450mm/225mm sweep, suitable for working on 230 volts, 50 Hz single phase supply including complete overhaling by provision of capacitor connecting box,connected wire etc.complete all as specified and as directed

Supply and fix surface mouting LED luminairies 1x 9 watts, 230 volts, 6000k wall/ceiling mounted type suitable for wall mounted fittings with all internal connections connector block with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge. Make : Havells cat LHE XBLP7IN1W009 or equivalent in CG/C&S/SYSKA

Supply and fix surface mouting LED luminairies 1x 18 watts, 230 volts, 6500k wall/ceiling mounted type suitable for wall mounted fittings with all internal connections connector block with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge. Make : Havells cat LHE XACP7PN1W018 or equivalent in CG/C&S/SYSKA

17. S&F LED light fitting, 1x15w, 230v decorative wall mounting type with multicolour ABS housing with poly carbonate rings, and glass shade with 10W LED lamp (Havells) & holders, connector block, etc including lamps complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-In Charge . Make : Havells Cat No : LHDL07150099 or equivalent in CG/Philips/C&S..

Taking down old U/S sub main wiring 4 Sqmm/6 Sqmm/10 Sqmm aluminium/copper including batten/conduit and making good disturbed surface to match the existing surface.

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 6.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 6.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M&L for providing in replacement MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate all as spacified and as directed .

S & F in replacement MCB SP 6 to 32 Amps, 240V 'C' Series 10 KA.

S & F MCB DP , 240 V, 32 Amps, 'C' serie, complete all as specified and directed by Engineer-In Charge. Make : Scheinder/Legrand/Havells/C&S.

S & Fixing inreplacement MCCB 63 Amps 4 pole 36 KA, 415 Volts 50 HZ in existing DB complete including connecting all incoming and outgoing connection by means of suitable size of lugs/thimbles all as specified and directed Make : Legrand /Havells/C&S/Indoasian

S&F Earth continuty conductor or main earthing lead fixed to wall on betten or recess or cheses or bureid in ground or drawn in conduit/pipe or fixed to poles or any indicated situation for loop earthing etc.as required 4mm galvenised wire comlete all as directed by Engr in charge.

M&L for Laying GI tubing 40 mm light grade with all fittings for cable protection fixing on poles & road/drainage crossing complete all as specified and directed by Engr-in Charge.

.S&F sheet metal enclosures with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole32Amp MCB ,240 volts complete all as specified and as directed by the Engineer in charge

Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected to GI strip 32 x 6mm as earth strip by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on ompletion and as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4, Type B-1 cover 40mm thick reinforced with 8mm dia CTD bars @ 75mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m complete all as specified in preambles of SSR Part-II and shown in electricl plate No. 3 of SSR Part-I.]

NIKESH ENTERPRISES

V SATYANARAYANA RAJU