Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.4 LAccepted-AOC VILL P O KANTHAL BERIA DOCK GHAT P S BASANTI DIST SOUTH 24 PGS PIN 743329 | BASANTI | SOUTH 24 PARGANAS | WEST BENGAL | 743329 | ₹7.4 L | L1 | Accepted-AOC 1st Lowest Bidder |
| 2 | L2₹7.4 LRejected-Finance | ₹7.4 L | L2 | Rejected-Finance 2nd Lowest Bidder |
| 3 | L3₹7.4 LRejected-Finance | ₹7.4 L | L3 | Rejected-Finance 3rd Lowest Bidder |
| 4 | L4₹7.4 LRejected-Finance | ₹7.4 L | L4 | Rejected-Finance 4th Lowest Bidder |
Tender Value
₹7.4 L
EMD Value
₹14,805
Closing Date
12 Feb 2026, 5:30 pmClosed
Executive Engineer-I
Joynagar Irrigation Division, New Office Building, Gr. Floor,Irrigation Campus, Puratan Bazar, Baruipur, Kolkata-700144
Emergent restoration of damaged wooden bridge over Tributory of river Hana near Chunakhali Six vent sluice at Mouza-Chunakhali in Block -Basanti, P.S.-Basanti, Dist-South 24 Parganas, under Joynagar Irrigation Division.
2026_IWD_999325_1
WBIW/EE- I/JOY/NIT-24 (e)/2025-26
Open Tender
CIVIL WORKS
10 days
Basanti (I) Sub-Division
Please refer Tender documents.
7 documents required · 7 mandatory
₹14,805
Yes
16 Mar 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
12 Feb 2026
6 Feb 2026
Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 metre etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels)
Taking out Jhaw / Eucalyptus piles from river bed or from elsewhere including carrying, stacking materials in the nearest stack yard. Above 17.5 cm. and up to 25 cm. diameter
Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed. Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end. 20 cm av. diameter
15 cm av. Diameter
Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. Note:-Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. For driving done by pile engine set (without staging) under specific instruction of Engineer-incharge, the rates will be enhanced by Rs. 4.00 per meter. 20 cm av. diameter
15 cm av. diameter
Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. Width of thinner end above 15 cm. Jhaw / Eucalyptus.
Splicing (as per drawing and direction of the Engineer-in-charge) in position 150 mm. to 250 mm. dia. of individual bullah with 2 Nos. 1250 mm. x 75 mm. x 10 mm. M.S. flat and 4 Nos. half rings made of (700 x 75 x 6) mm. M.S. flat fitted and fixed with 4 Nos. 12 mm. dia. bolts with nuts and washers. Flat bars are to be fitted and fixed with 3 Nos. 20 mm. dia. through bolts with nuts and washers including cost of supply and carriage of all materials, making necessary scaffolding, stagging etc. drilling holes complete (splicing is to be done on position after the bottom bullah is driven as per necessity). Length of lap of bullah should be provided as five times the diameter of bullah or 90 cm. whichever is greater.
Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) Hard Wood (Mahua / Arjun / Tentul etc or similar quality hard wood as approved by the Engineer-in-charge)
Labour charges for old or new wood work including hoisting, fitting & fixing including supplying new nails and screws wherever necessary etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels)
Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge Two Coats
Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc.complete as per the direction of the Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
Additional.pdf
Additional Documents • 1.68 MB
BOQ_2447792.xls
BOQ • 0.30 MB
2911_Form.pdf
Tender Documents • 0.54 MB
Download all tender documents and submit your bid