Construction of Sericulture Community Centre Building including internal and external services development of site at Dheem Kataru in Seraj Constituency Distt Mandi HP

Amount

Cutting in earth work in all heights/depths and in all kinds of soil such as kankar, moorum, shingal and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling/wedging out rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transportation. Any damage to private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in earth work in all kinds of soils such as pirk work, juimper work and chiselling/wedging out of hard or soft rock and disposal of all excavated earth up to any leads and lifts disposed earth to be levelled and neatly dressed as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc., in all kind of soils such as pick work,jumper work and chiselling/wedging out of hard or soft rock up to all heights stacking the excavated soil not more then 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers,when required in to plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer -in-charge.

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift up to 1.50 metres disposed earth to be levelled and neatly dressed including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material in all leads & lifts.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering,strutting and propping etc with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work including carriage of material in all leads & lifts:-

Foundation, footing, bases of columns etc. and mas concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etc. up to 200mm in thickness

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Colums, pillars, posts and struts :- Square, rectangular or polygonal in plan.

Stair cases with sloping or stepped soffits excluding landings

Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers,bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor.

Edges of slabs and breaks in floors and walls. Under 20 cm Wide

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in .Foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in .Foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1:8:16(1cement:8sand:16graded stone aggregate 20mm nominal size ) and curing complete on slab and floor excluding the cost of form work screed laid under flooring including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:5:10(1cement:5sand:10graded stone aggregate 40 mm nominal size) with 15% plum and curing complete including cost of form work in retaining walls/breast walls, the size of plum shall usually be 150mm to300mm as per the HPPWD specification including carriage of material in all leads and lifts.

Providing weepholes in brick masonry/stone masonry/plain reincorced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawings facae complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material in all leads and lifts.

Providing and laying upto floor all level reinforced cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in string courses, coupings, bed plates anchor blocks, plain window sills and the like including carriage of material in all leads and lifts.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristics strength of M-20 GRADE and curing complete excluding the cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads and lifts:-

Foundations, footings, bases of columns and the like mass concrete.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor two level :

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers lintels in all heights.

Columns, pillars, posts and struts up to all heights.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing up to all heights.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristic strength of M-20 GRADE for reinforced concrete chajjas not exceeding 10 cm thickness upto all heights including finishing the exposed surface with cement mortar 1:3(1cement:3sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete including cost of binding wire up to all heights including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg of cement per sq. metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material in all leds and lifts.

Providing throating or plaster drip and moulding to R.C.C. chajjas including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.

2nd class half brick masonry using common burnt clay building bricks in superstructure above plinth level up to all floor level in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Boulder filling dry hand packed tightly in and under floors etc. including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand) including carriage of material in all leads and lifts.

Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:4(1cement:4 sand) including carriage of material in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position 2nd class deodar wood including carriage of material in all leads and lifts.

Providing and fixing40mm thick 2nd class deodar wood panelled door shutters having styles and top rail 100mm width, lock rail 150mm wide and bottom rail 200mm wide with pannel insetion of 12mm thick prelaminaated board both side bwp phenol bonded exterior/interior grade including bright finishedblack enamelled iron butt hinges with necessary screws and chamfaered edged beading 30x20mm on both faces of shutters including carriage of material in all leads and lifts.

Providing and fixing fully glazed shutter for window, ventilators and clerestory windows top rail and bottom rail 75mm width and chamfered edged beading 20mmx10mm for glass panes including bright finished black enameled iron butt hinges with necessary screws etc. complete 40mm thick 2nd class deodar wood including carriage of material in all leads and lifts.

Providing and fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 –G with wire of dia 0.56mm for doors, windows and clerestory windows and chamfered edged beading 20x12mm including bright finished black enameled iron hinges with necessary screws including carriage of material in all leads and lifts. 40 mm thick 2nd class deodar wood.

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of material in all leads and lifts.

Plain glass 4mm thick.

Frosted glass 4mm thick.

Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete 1st class deodar wood including carriage of material in all leads and lifts.

Providing and fixing MS grills of required pattern in wooden/pressed steel frames of windows etc. with MS flats square or round bars with rounded headed bolts and nuts welded or by screws including carriage of material in all leads and lifts.

Providing and fixing cement bonded particle/Bison Board ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) 6mm thick including carriage of material in all leads and lifts.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm in cement concrete 1:3:6(1cement:3sand:6graded stone 20mm nominal size)including carriage of material in all leads and lifts.

Providing and fixing anodized aluminium sliding door bolts and anodized colour and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws, nuts, bolts etc. complete including carriage of material in all leads and lifts:-

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws, nuts, bolts etc. complete including carriage of material in all leads and lifts.

Providing and fixing oxidized M. S. hooks and eyes 150mm including carriage of material in all leads and lifts.

Providing and fixng 100mm bright finished brass floor door stoper with rubber cushion screws etc. to suuit shutter thickness complete including carriage of material in all leads and lifts.

Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts:- 40mm thick.

Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor. 15mm thick including carriage of material in all leads and lifts.

Extra for providing and fixing glass strips in joints of terrazzo Skirting floors. 40 mm wide and 4 mm thick including carriage of material in all leads and lifts.

Providing and laying marble work (Table rubbed and polished) in flooring 20mm thick base in cement mortar 1:3 (1cement:3sand) including jointing with cement mortar 1:2 (1white cement:2marble dust) with an admixture of pigment to match the shade of the marble 20mm thick baroda green marble including carriage of material in all leads and lifts.

Glazed tiles 6mm thick (any size/colour) in skirting riser of steps and dado 12mm thick cement mortar 1:3(1cement:3sand) and jointed with cement slurry including carriage of material in all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing ridge or hips 60cm over all with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing valley 60cm over all with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpet and rubber washer complete with all accessories as required as per the direction of Engineer-in-charge including carriage of material in all lead and lifts.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of black coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Steel work welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material inn all leads and lifts:-

In beams, joists, channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing 1mm thick M.S. sheet garrage door with frame of 40mmx40mm6mm angle iron 3.15mm M.S. gusset plates at the junctions and corners, all necessary fittings complete including applying a priming coat of red lead paing Using M.S. angle 40mm x40mmx6mm for diagonal braces including carriage of material in all leads and lifts.

Providing and fixing M.S. B.P. Sheet 1.6mm to 2mm thhick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel lwork shall be measured and paid for separately) including carriage of material in all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter:-Enamel paint other than white including carriage of material in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter sand papering and knotting including carriage of material in all leads and lifts:- Readymixed paint brushing wood primer pink.

Painting coats (excluduing priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stoping including carriage of material in all leads and lifts:- Enamel paint other than white/white paint.

6mm cement plaster to ceiling including carriage of material in all leads and lifts. In cement mortar 1:3(1cement:3sand).

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts:- In cement mortar 1:6(1cement:6sand).

20mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts. In cement mortar 1:6(1cement:6sand).

20mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering up to all heights including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts. In cement mortar 1:3(1cement:3sand).

Distempering with oil bound distemper of approved brand and manufacture and of required shade on undecorated ceiling surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on un decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other forein matters sand papered smooth to give final matter finish to the surfacae complete including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equrlied on undecorated wall surface to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1 cement : 3 sand :6graded stone aggregate20mm nominal size) including finishing the top surface of concrete smooth including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry bricks/stone aggregate 40mm nominal size) with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lift.

Constructing course rubble hammer dressed “U” shape open surface drain with side wall 15x22cm in cement mortar 1:6(1cement:6sand) and inside plastering with cement mortar 1:3(1cement:3sand) including earth work and laying 10 cm cement concrete in 1:5:10(1cement:5sand:10graded stone aggregate 40mm nominal size) and 7.5cm cement concrete 1:2:4(1cement:2sand:4graded stone aggregate of 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I. pipes and filling the same with cement concrete 1:3:6(1cement:3sand:6graded stone aggrregate 20mm and down gauge) after the conduit/G.I. pipe is laid (excluding the cost of conduit/G.I. pipe) including carriage fo material in all leads and lifts.

Providing and fixing to wall ceiling and floor Polyethylene- Aluminium- Polyethylene(PE-AL-PE) composit pressure pipes confirming to IS-15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temprature up to 80 degree C, including all special fittings of .composite material (engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc; with clamps at 1.0 metre spacing. This includes testing of joints complete as per direction of the Engineer-In- charge, including carriage of material in all leads and lifts.

(16mm OD) Outer dia.

Providing and fixing to wall ceiling and floors galvanized mild steel tubes (Medium grade) tube fittings and clamps including making good the wall, ceiling and floors, including carriage of material in all leads and lifts, confirming to BIS specification.

15mm nominal bore.

20 mm nominal bore.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing sand cast/cast iron spun spigot and socket waste and ventilating pipes (lead caulked joints to be measured and paid for separately) confirming to BIS specification including carriage of material in all leads and lifts:- 100mm Nominal bore.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of joints including carriage of material in all leads and lifts:- 100mm Nominal size.

Providing and fixing sand cast iron/cast iron spun fittings and accessories including carriage of material in all leads and lifts. Confirming to BIS specification:-(a) Bends of required degree (any radius) with oval access door insertions rubber washers 3mm thick bolts, nuts and washers complete:-

Providing and fixing cast iron cowl confirming to BIS specification including carriage of material in all leads and lifts:- 100mm Nominal size.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G. I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts:-

1000 litres net capacity

Providing and fixing brass full way valve with wheel confirming to BIS specification including carriage of material in all leads and lifts:-

15mm nominal size

20mm nominal size.

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC clamp ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC door bend with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing single equal branch with oval access door, ISI marked insertion rubber washers 3mm thick bolts and nuts including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixting PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts:-

110mm dia.

75mm dia.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors etc. complete. 110mm x 75mm including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand) (seat and cover to be measured and paid for separately including carriage of material in all leads and lifts:- Anglo Indian

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10.00 litres capacity (full flush) European standred control low level PVC flushing cistern with fittings with a pair of brackets with fitting such as lead valve, syphon,15mm nominal size PVC ball valve with polythene float, with push button,coulping for connection with inlet and outlet and overflow pipes40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts,

Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:- Solid type white plastic seat and cover including carriage of material in all leads and lifts.

Providing and fixing stainless steel kitchen sink diamond make including cost of C.I. o r M.S. brackets painted with including cutting holes in walls and making good the same including carriage of material in all leads and lifts. Single bowl with drainage board over all size 610mmx510mm with bowl depth 200mm confirming to BIS specification.

Providing and fixing vitreous china wash basin with single/double holes for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings confirming to BIS specification including carriage of material in all leads and lifts:- Flat back 550mmx400mm.

Providing and fixing vitreous china bowl pettern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately including carriage of material in all leads and lifts:- Flat back type of size 430mm x 260mm X 350mm..

Providing and fixing divisional plate for urinals 600mmx300mm vitreous china confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fitting inclucing C.I. syphonic,appartatus,mosquito proof lid, C.P. brass unions, and coupling for connection with inlet, outlet and overflow pipes including cutting holes in walls and making good the same ( overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts, Vitreous China 5.00 Litre Capacity.

Providing and fixing C.P. brass waste for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing chromium plated stainless steel grating 100mm confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Providing and fixing P.V.C. plastic waste pipe for wash basin or sink of following size BIS specification including carriage of material in all leads and lifts.32mm mm dia.

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs wth C.P. brass screws including carriage of material in all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.I. brass screws, including carriage of material in all leads and lifts. 600x20mm

Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing C.P. brass bib tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass pillar tap with capastan head including carriage of material in all leads and lifts confirming to BIS specification:- 15mm dia.

Providing and fixing C.P. brass angle valve15mm without nuts & pipe confirming to BIS specification including carriage of material in all leads and lifts.

Providing and fixing G.I./M.I. unions of following sizes(where not included in the item) including carriage of material in all leads and lifts confirming to BIS specification:-

(a) 15mm nominal size

(b) 20mm nominal size.

Providing and fixing PVC connection pipe with brass union 300/450 mm length and 15mm nominal bore including carriage of material in all leads and lifts confirming to BIS specification.

Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:6(1cement:6sand) and water tight C.I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.78kg) square mouth trap 100mmx100mm size 'P' type including carriage of material in all leads and lifts confirming to BIS specification.

Providing and laying (to level or slopes) and jointing reinforced concrete(light duty) non-pressure pipes 1st class NP-2 or P of the following internal diameter with collar and butt ends prepared for collar joints including testing of joints 150mm dia including carriage of material in all leads and lifts.

Constructing manhole with RCC top slab in 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:-

(i) Inside size 800mmx800mmx500 deep including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm internal diamension total weight of cover and frame to be not less than 38 kg.(weight of cover 23 kg and weight of frame- -15kg) with 200 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand).

Proviidng 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes septic tank with 200mmx200mmx100mm cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Supplying and fixing cast iron cover with frame for manhole of internal diamensions 450x610mm rectangular C.I cover (light duty) single seal pattern-I, the weight of cover and frame to be not less than 38kg. (Weight of cover 23kg and weight of frame 15kg), including carriage of material in all leads and lifts.

Making connections of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and making necessary channels with cement concrete 1:2:4 (1cement : 2 sand : 4graded stone aggregate 20mm nominal size) for the drain complete:- for pipe 100mm to 150mm internal diameter/ nominal size including carriage of material in all leads and lifts.

Constructing soak pit 2.5 metre diametre 3.00 metre deep with45x45cm dry brick honey comb shaft with bricks of class designation 75 and soil waste drain pipe 100mm diameter 1.80 metre long as per standard design with F.P.S. including carriage of material in all leads and lifts.

VIDYA BHUSHAN CONTRACTOR

ROOP LAL

RAM SINGH

KISHOR KUMAR GOVT CONT

RAKESH KUMAR

BHUPENDER KUMAR GOVT CONT