Re Electrification of 3 No of Q type flats 2024 2025

Re-Electrification of 3 No of Q type flats 2024-2025

Erection,Termination and connection of the 4 way/6 way, 3ph ,415 V Horizontal double door MCB Lighting DB Having 63 A , 4 pole Isolator as incomer and 6 no of 2 pole isolators of rating 40 A for each Quarters and 6A MCBs for Providing Supply for Stair case area of each flats. DB shall be mounted either in a concealed way or in suitable frame fabricated by suitable MS angle frame (50 x 50 x 6),epoxy painted(primer + 2 coats) and properly fixed on wall by the contractor , The incomer PVC armoured cable (upto 4 * 50 sqmm) outgoing flexible copper cables of 4 sqmm, earth cables of size 2.5 sq mm for power circuit through 40 A DP to each quarters and out going for staircase shall be glanded /terminated and connected using suitable cable lugs /clamps /ties . All Required structural items ,DB with DP/MCB s,flexible glands ,suitable pvc pipes etc, shall be in the scope of the contractor. Existing in-put armoured cable can be used for main supply from Piller Box . If incomer cable length is not adequate for termination in DB, Cable should be jointed with copper/aluminum flexible cable of size similer to incomer cable by proper lug/ferrules by providing suitable joint box near DB , This also be in the scope of the contractor APPROVED MAKE FOR DB AND MCBs:-LEGRAND / HONEYWELL/L&T/SCHNEIDER

Erection,Termination and connection of the 18 way, single phase ,230V Horizontal mcb lighting DB having 40A,30 mA RCCB, 40A DP isolators as incomers SP MCBs -6 A-5 no and SP MCBs 16A -6 no single phase out going circuits, LDB shall be mounted properly concealed on the wall by the contractor . Incomer for this DB should Drawn through pipe size not less than 20mm from Main DB Fixed in the ground floor by suitable metal saddles spacing not less than 50 cm , 4 sq mm Phase and Neutral Wire and 2.5 Sq mm for Earth. All Required items for this Work Shall Be in the scope of the Contractor (Including the cementing and finishing of the wall after fixing of the DB) APPROVED MAKE FOR DB , RCCBs AND MCBs:-LEGRAND / HONEYWELL/L&T/SCHNEIDER

Supply of Modular Switches 6A as spares for The work specified in Schedule No 3.

Supply of Modular Sockets 6A as spares for The work specified in Schedule No 3.

Supply of Modular step type regulators as spares for The work specified in Schedule No 3.

Open pipe Point wiring with individual control For 16 A power sockets and 16 A DP switch for ACs, using Flexible copper cables 2.5 sqmm for control and neutral connection Through pvc conduits not less than 20 mm using metal saddles with spacing not exceed 50 cm as per relevant drawings or instructions from FACT Engineer in Charge . The work shall include wiring along roof /beam/column/ceiling using clamps and drawing wires as required , preparation and fixing of modular switch boards,switches,cover plates,dummy plates,Etc drawing of 1.5 sq mm earth wires of flexible copper wire of green color for body earthing of metal clad items, connecting,testing and commissioning . for wire length greater than 10 m shall be considered as one and half point . All the materials for this Work shall be in the Scope of the contractor.If additional power sockets are required in same Switch Boards that shall be considered as half point. APPROVED MAKE : WIRE : POLYCAB/ RR KABEL/ KEI/ FINOLEX OF FR TYPE SWITCH, SOCKETS, ETC : LEGRAND- MYRIUS //HONEYWELL-HORIZON/SCHNEIDER-UNICA PURE/L&T-ENTICE PIPE SHALL BE OF MEDIUM ISI MARKED

Supply of Modular Switches 16A as spares for The work specified in Schedule No 7

Supply of Modular Sockets 16A as spares for The work specified in Schedule No 7

Supply of 16A DP as spares for The work specified in Schedule No 7

Installation of of 20 W LED tube fittings with required clamps/fastners, All materials such as LED Fittings, clamps and fastners required for this work are in the scope of the contractor, Tube lights will be supplied by FACT

Supply and Installation of Calling Bells with required clamps/fastners etc, All materials such as ,Calling Bell of Reputed Make, clamps and fastners required for this work are in the scope of the contractor.

Supply and installation of Angle Batten Holders For Rooms , Bathrooms, Stores /Work area All the material for the successful completion of the work in cluding Angle batten Shall be in the scope of the Contractor

Rerouting of Power Cables up to 4*50 Sqmm from Existing 3 phase DB to New DB Location as specified by FACT Engineer -in -Charge

Linsta Services

Nev Tech

techzone engineers pvt ltd

LAMOS TECHNOLOGY SOLUTIONS PVT LTD

V V ELECTRICALS

AKKARIA ELECTRICALS