Reconductoring works with HT ABC from Aazhimala to Chappath Under Electrical Section, Kottukal of Electrical Division, Neyyattinkara under Electrical Circle, Kattakada

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Transporting LT ABC by hired vehicle to a distance up to 5 km and carring up to 2 drum including loading and un loading using crane

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Erection of suspension clamp for 11KV ABC of any size

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Providing/Inserting 2 line spacer on the existing LT OH line.

Dismantling 2 Line spacer from existing OH Line

Dismantling 3 line spacer on the existing LT OH line

Dismantling one 2x40W fluorescent tube fitting from the existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Providing/Inserting 3 line spacer on the existing LT OH line.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Please Enable Macros to View BoQ information