Upgradation of CC Road & CC Drain from RWS Office to New Court Complex building at Seshayyametta in 34th Division of RMC. (Under General Funds / Pushkaram Funds)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RCC)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Construction of granual surface course by providing well graded material like 2.36mm to 5mm size HBG Material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC,and compacting eith three wheel 80-100 KN static roller/vibrator roller 80-100 KN capacity to achieve the desired density,complete as per technical specification clause 402 MORD.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Fixing channels for levelling the concrete with beam Vibrator Vaccume dewatering power trowelling to finish the surface including Hire Charges for all materials, labour charges, fuel charges etc., complete for finished item of work including overhead charges & contractor profit etc complete as per s s and directed by the site Engineer.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RCC)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick / Tile Work)

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Shifting of Existing House hold water service connections in drain alognment with all necessary plumbing materials and all labour charges etc., complete as directed by the site engineer.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Out Form Work

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing RCC Grade M20 (nominal mix) with minimum Cement of 350 Kgs/ Cum of Concrete using 20mm (60%) and 10mm (40%) size graded machine crushed HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authorities for Culvert slabs & bed blocks with form work.

Supply and Delivery of 10 HP(7.5 K.W) 100 mm Suction, 100 Delivery total head 14 RMT x 33.90 L.P.S Sewage SP Coupled Self Priming series coupled, Non Clog pump set Emperler 292 mm Material of construction Emperler cast iron, Motor body cast iron, delivery casing cast iron, shaft carbon steel shaft sleeve stainless steel sealing gland 19 pack voltage range 415±10% 1440 R.P.M i) Non Clock Pump - 01 ii) 10 H.P TEFC 1440 R.P.M foot mounting motor-01 iii) M.S channel base plate -01 iv) Coupled pulley - 1set K.S.B, Kishore, K.B.L Makes including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and Delivery of 10 H.P Suitable Panel Board SASD Starter AMPS & Voltmeter RYB Lamp -03 no's suitable MCB single Phasing parameter internal wearing wall mounting with specials for motor eretion etc including transportation but excluding all taxes. Include all cost and conveyance of material and labour charges etc complete as directed by the site engineer.

Supply and delivery of following material with specials for motor erection etc., including transportation, cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

4 Sqmm 3 Core Flat Copper Cable

100mm Grey Colour Heavy Duty Hose Pipe

100mm CI Hose Nipple Heavy Duty

100mm GI Hose Clamp

100mm PVC Foot Valve

Fixing pump set and Erection changes

Panel Board & Cable, Pipe laying and jointing

5 KVR Capacitor ISI & APSEB Approval make

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves,with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-,500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder,Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS,AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and including transportation etc., complete as directed by the site engineer For 50mm dia PN 1.0 (MPa)

Labour charges for fixing 50mm Air Valve including Boring the mains and threading the bore fixing nipple etc.complete as per S.S.

Manufacture, supply and delivery of HDPE pipes confirming to IS: 4984-2016 including transportation to any where in A.P., excluding excise duty, Sale tax and specials etc. complete (Supply upto 90mm dia in Coil & above 90mm dia Straight length in 6 M.) as per SS For 160mm dia, PN6, PE-100 Grade HDPE pipes in 6 Mtrs length

Laying and jointing of 160mm dia HDPE pipes by butt fusion welding as per IS:7634- Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc. complete as per S.S. Specialized labour is needed for execution of laying and jointing for HDPE pipes with butt fusion welding technique as per IS specification.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Providing Sand Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

3. Provision for Seigniorage Charges

4. Provision for DMF 30% on Seigniorage Charges

5. Provision for Merit 2% on Seigniorage Charges

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RCC)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Construction of granual surface course by providing well graded material like 2.36mm to 5mm size HBG Material,spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC,and compacting eith three wheel 80-100 KN static roller/vibrator roller 80-100 KN capacity to achieve the desired density,complete as per technical specification clause 402 MORD.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade) Cement component not less than 400Kgs / cum, coarse and fine aggregates conforming to IS:383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Fixing channels for levelling the concrete with beam Vibrator Vaccume dewatering power trowelling to finish the surface including Hire Charges for all materials, labour charges, fuel charges etc., complete for finished item of work including overhead charges & contractor profit etc complete as per s s and directed by the site Engineer.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RCC)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick / Tile Work)

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Shifting of Existing House hold water service connections in drain alognment with all necessary plumbing materials and all labour charges etc., complete as directed by the site engineer.

Collection and supply of 2.36mm to 5mm HBG Chipse/Quarry dust from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Out Form Work

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Providing RCC Grade M20 (nominal mix) with minimum Cement of 350 Kgs/ Cum of Concrete using 20mm (60%) and 10mm (40%) size graded machine crushed HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authorities for Culvert slabs & bed blocks with form work.

Supply and Delivery of 10 HP(7.5 K.W) 100 mm Suction, 100 Delivery total head 14 RMT x 33.90 L.P.S Sewage SP Coupled Self Priming series coupled, Non Clog pump set Emperler 292 mm Material of construction Emperler cast iron, Motor body cast iron, delivery casing cast iron, shaft carbon steel shaft sleeve stainless steel sealing gland 19 pack voltage range 415±10% 1440 R.P.M i) Non Clock Pump - 01 ii) 10 H.P TEFC 1440 R.P.M foot mounting motor-01 iii) M.S channel base plate -01 iv) Coupled pulley - 1set K.S.B, Kishore, K.B.L Makes including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Supply and Delivery of 10 H.P Suitable Panel Board SASD Starter AMPS & Voltmeter RYB Lamp -03 no's suitable MCB single Phasing parameter internal wearing wall mounting with specials for motor eretion etc including transportation but excluding all taxes. Include all cost and conveyance of material and labour charges etc complete as directed by the site engineer.

Supply and delivery of following material with specials for motor erection etc., including transportation, cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

4 Sqmm 3 Core Flat Copper Cable

100mm Grey Colour Heavy Duty Hose Pipe

100mm CI Hose Nipple Heavy Duty

100mm GI Hose Clamp

100mm PVC Foot Valve

Fixing pump set and Erection changes

Panel Board & Cable, Pipe laying and jointing

5 KVR Capacitor ISI & APSEB Approval make

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves,with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-,500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder,Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS,AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and including transportation etc., complete as directed by the site engineer For 50mm dia PN 1.0 (MPa)

Labour charges for fixing 50mm Air Valve including Boring the mains and threading the bore fixing nipple etc.complete as per S.S.

Manufacture, supply and delivery of HDPE pipes confirming to IS: 4984-2016 including transportation to any where in A.P., excluding excise duty, Sale tax and specials etc. complete (Supply upto 90mm dia in Coil & above 90mm dia Straight length in 6 M.) as per SS For 160mm dia, PN6, PE-100 Grade HDPE pipes in 6 Mtrs length

Laying and jointing of 160mm dia HDPE pipes by butt fusion welding as per IS:7634- Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure etc. complete as per S.S. Specialized labour is needed for execution of laying and jointing for HDPE pipes with butt fusion welding technique as per IS specification.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

Earth work for Ordinary Soil excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Carting away of excavated earth / debries to a lead of 2KM (the rate including conveyance charges, labour charges for loading, unloading charges) including ideal hire charges of truck etc. complete as directed by the Departmental Authorities of the work.

Providing Sand Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH Including cost and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the site engineer.