AR and MO of T II Qtrs Block C Three storied 6 sets Type II Qtrs Block D two Storied half Section 2 sets and Type II Qtrs Block E Single storied 2 sets old building at Power colony Totu Shimla 11 HP for the year 2026 27

2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means . The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :4.1.5 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.3.81.1 One coat

13.91 removing dey or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.82 Wall painting with acrylic emulsion paint VOC Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 13.82.2 Two coats

13.109 Fnishing walls with water proofing cement paint of required shade :13.109.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete.

13.99 Painting with synthetic enamel paint with approved brand and manufacture of required colour to give an even shade :13.99.1 One or more coats on old work

13.92 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.92.1 Old work (one or more coats)

9.27 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :9.27.1 35 mm thick shutters