Facelift of L and W Workshop Offices, Toilets and EKM Documentation Room of Submarine Division for MRLC

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Providing and fixing 1st quality anti-skid floor tiles in toilets & wash rooms of 10mm thick conforming to IS : 15622, of approved make SOMANI / KAJARIA in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chipping of existing floor tiles)

Providing & Fixing Premium quality Vitrified tiles (Double charged) of size 600*600*10mm in floors with water absorbtion less that 0.08% and conforming to IS 15622 of approved make KAJARIA in all colours and shades laid on 20mm thick cement pigment of MYK laticrete / saint gobaim or its equivalent material to maintain the level including grouting the joints with white cement and matching pigments etc., and all materials complete all as directed . (Rate includes removal of old tiles / hacking of existing floor as required) Complete all as EIC.

Providing and laying 2 mm thick Poly Vinyl flooring to be installed with suitable adhesive etc. Finishing should be smooth without any undulations including all Etc. Complete all as directed by the EIC.

Providing and fixing anodized extruded aluminium doors, windows & ventilators (single or double shutter), doors and partitions (single or double shutter) part pannelled and part glazed with pre-laminated flat pressed 12mm thick particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium powder coated (50 Microns) frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators and 3mm wall thickness for doors & partitions as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be clear float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays, floor springs, hydralic door closers etc) lokcing arrangement for windows, Godrej make mortice lock with 3 no keys for each door, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Apply two coats of premium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes removal of old paint with Buffing machine)

Applying two coats of putty of approved brands birla / JK to internal walls surfaces including applying suitable primer on old wall surface thourough scrapping and preparation. Putty shall be finished till a smooth and even surface is achieved. (Rate includes removal of old paint with Buffing machine)

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing Two(2) coats of Aluminium paint of approved brand and manefacture to give an even shade for Crane Girders,columns etc., after thorough cleaning & scrapping over a coat of red oxide complete all as directed.

Repairing of all kinds of false ceiling, replacing of damaged false ceiling boards including all materials, consumables, labours and hiring charges of machinery all complete as directed by Engineer-In-charge.

Providing 15mm thick Plaster with CM (1:4) to walls at all heights and ceilings, Beams, Staircase, lintel soffits, chajjas, projections, narrow bands and widths etc., including cost of all materials , tools, plant and labour, scaffolding arrangements cand curing all as per specifications and directions of the engineer. (Item includes removal of spalled concrete and apply suitable chemical) ( Chemical qty measured in seperate item)

Supply and applying Nitto bond AR / SBR of Fosroc make after thorough cleaning the plaster surfaces complete all as directed.

Supply, fit and fix white glazed earthenware European type water closest (EWC) of Parryware / Hindware make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat cover with low level cistern of 10 litres capacity of same make as specified including all fittings shall be provided complete all as directed.

Providing and fixing white vitreous china flat back lipped front urinal basin of 430x260x350 mm with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (parryware/ hindiware)

Providing and fixing white vitreous china urinal partition of required size with G.I clamps including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (parryware/ hindiware)

Supply and providing long neck tap in bathrooms etc., of make Jindal / Waterteck or its equivalent Complete all as directed.

Providing and fixing CP Towel rail of standard length (600mm long) of approved make Waterteck or its equivalent including all accessories etc., complete

Providing & Fixing of shower rose with necessary fittings

Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Parryware / Hindware / Jaquar make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap, 32mm dia Chromium plated heavy duty approved waste fittings, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete

Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete

Supply and fixing of 25 mm thick 750 x 2000 mm size, PVC doors with frame & shutter for toilets (Sintex or equvilant make) including aluminium aldrop, towerbolt, handles and butt hinges etc., complete

Supply and providing 35mm thick Flush door shutter of make KALPATHARU complete all as directed.

Providing PVC health faucet including 1.5m flexible pipe of make Watertec or its equivalent including all accessories etc., complete

Providing and fixing 25 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply & providing UPVC Nano - trap of make sudhakar or supreme with ss grating complete all as directed

Supply & Fixing 15 mm dia bore Brass C.P angle cocks of standrad quality with 15mm dia bore and Complete all as directed. (Watertec or its equivalent)

Providing and fixing PTMT soap Dish Holder of approved make Watertec or its equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., complete

Disposal of debries, surplus excavated earth, wooden scrap, garbage and rubbish outside the HSL premises to private dumping yard up to 20Km lead (not to dump in HSL colony dumping area & surrounding areas) it is the responsibility of the firm to ensure no objection shall be raised by Muncipal authorities / from any bod. If any dispute arises the agency has to sort out at their own risk etc., complete all as directed.

Cleaning of wall tiles, comods, Wash basins, taps etc., with Acid or its equivalent material complete all as directed (After completion of cleaning matching grouting putty is applied to entire toilet room tiles is in contractor scope)

Supply and fixing Urinal 32mm dia Waste pipe complete all as directed.

Removal of existing sanitary fittings like EWC etc., safely and installed same after completion of renovation work compllete all as directed

Supply and providing Stainless Steel hardware items 150mm dia Butt hinge for door

Supply and providing Stainless Steel hardware items 150mm long Tower bolt for door

Supply and providing Stainless Steel hardware items 150mm door stopper

Supply and providing Stainless Steel hardware items 150mm long Handle for door

Supply and providing Stainless Steel hardware items 300mm long Aldrop for door

Supply and Fix the fabric vertical venetian blinds of approved make Jacobs / Vista including connected extruded aluminium head rails and all accesories etc., complete

Providing plain cement concrete 1:2:4 nominal mix by using 20 mm aggregate and baby chips including mixing, depositing in position, tampering, finishing, curing including all materials & labour etc., complete all as directed. (Item includes chipping of damaged haunching concrete and dispose to a lead of 50M)

Supply and providing Brush bond water proofing chemical (Powder + Liquid) of Fosroc make complete all as directed. (Note: 2 coats shall be provided to wall surfaces, floor surfaces etc., by the contractor)

Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima), Berger (All guard) where ever specified by Engineer after through scrapping & cleaning of old surface including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Applying two or more coats of french sprit polish of approved brands including a coat of wood filler on old wooden surface after thourough cleaning and preparation of surface as directed by Engineer-in-charge.

Supply and fix Toilet roll holder complete as directed

Removal of door / windows with frame and refixing the same in required locations including basic repairs all complete as direceted by Engineer -Incharge

Concealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch. (App makes: Anchor/Havells/legrand or Equavalent.)

Supply, fix, test and commissioning of 8 modular type switch board with 3no 3pin,6A socket with 2no switches as directed by the engineer incharge.

Supply, fix, test and commissioning of 18/20watt LED tube Light as directed by the engineer incharge.(App makes: Phillips/CG/Havells or Equavalent.)

Supply, fix, test and commissioning of 230V/1200mm star rated Ceiling Fans as directed by the engineer incharge. (App makes: CG/Almonard/Havells or Equavalent.)

Supply, fix, test and commissioning of 1 phase 240V, 50 Hz 400mm sweep wall mounting fan. (Approved make :CG/Almonard/Havells/Orient or Equivalent.)

Supply, fix, test and commissioning of 8 modular type switch board with 1no 3pin,6A socket with switches as directed by the engineer incharge.(App makes: Legrand/Havells/Anchor or Equavalent.)

Supply, fix, test and commissioning of 20A DP MCB with Enclosure for Incoming Power supply as directed by the engineer incharge.(App makes: Legrand/Havells/Anchor or Equavalent.)

Removal of old light fittings, unwated cables / old wiring etc., and handover to Plant Maintenance Dept.

Supply,Install, test and comissioning of 2.0Ton capacity, 5 STAR Copper Inverter Split AC,1PH, 230 V, 50 Hz, Copper Condenser, along with supply ,installation of 3.0Kva Stabulizer, control cables,copper pipe with foam, core cutting, Outdoor unit stand, drain pipe, and etc.

Supply, fix, test and commissioning of 2x2,36/39watt ceiling mounted White LED fixture with all accessories. (Approved make Schneider/Wipro/ Jaquar/ philips/ CG/ Havells or Equivalent.)

Supply,Install, test and comissioning of 1.5 Ton capacity, 5 STAR Inverter Window AC,1PH, 230 V, 50 Hz, (Copper Condenser Turbo Cool) Refrigerant: R32., along with with Automatic voltage stabulizer,drain pipe, and control cables etc. (Approved make :Bluestar/Carrier/Voltas/ or Equivalent.)

Supply, fix, test and commissioning of 1 phase 240V, 50 Hz 400mm sweep wall mounting fan. (Approved make :CG/Almonard/Havells/Orient or Equivalent.)

Supply, fix, test and commissioning of 20watt/230VAC,50Hz LED Tube lightfitting as directed by the engineer incharge. :CG/Havells/Phillips/Bajaj.)

Concealed PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch make :Finolex/ Polycab/Havells/.or Equivalent.)

Concealed PVC conduit wiring with 3 runs of 4.0 sq.mm FRLSH PVC flexible copper wires run through PVC pipe concealed the all drops and switch boards for One point controlled by one switch make :Finolex/ Polycab/Havells/.or Equivalent.)

Supply, fix, test and commissioning of 20A DP MCB DB &16A Socket with enclosure for AC as directed by the engineer incharge. (Approved make :Legrand/ Anchor/CG/Havells/.or Equivalent.)

Removal of old, AC units, light fittings, unwated cables / old wiring etc., and handing over to Plant Maintenance Dept.

KCVS Enginering Works (BID ID -419636)

HANUMAN ENTERPRISES (BID ID -419706)

VIJAYALAKSHMI CONSTRUCTIONS (BID ID -419701)

JYOTHI ENGINEERING WORKS (BID ID -419702)

VENI ENTERPRISES (BID ID -419829)

OM ENGINEERING (BID ID -419821)

B.RAMARAO ENTERPRISES (BID ID -419699)